FlinQ FQC8142 User Manual

FLINQ WIRELESS BLUETOOTH

ON-EAR HEADPHONE

FQC8142

V1 User Manual

Add pictures and details

Specifications:

Bluetooth: V5.0 + EDR

Bluetooth Protocols supported: A2DP/HS/HFP/AVRCP

Standby Time: Up to 450 Hours max*

Music Play Time: Up to 5-8 hours max*

Talk Time: Up to 6 Hours max*

Battery: 300mAh Lithium Battery

USB charging: DC 5V IN 1000mA

FM frequency: 87.5-108MHz

Wireless frequency: 2.401-2.480GHz

Wireless distance: 10 meters max

Frequency: 20Hz-20KHz

Speaker: 40mm

Output power: 35mW

Rated Power: 2x 5W

SNR: 88dB

Charging time: ≤2 hours

Note: * Depends on brand, phone model / type and volume settings

USER INSTRUCTIONS:

Charging mode:

Use the supplied micro USB cable and connect it with the headphone’s connection.

You can use any available USB power source with 5V power. The charging time is
approximately 2 hours. During the charging mode the LED light
will turn red. When it is fully charged, the LED is OFF.

Pairing the headphone by Bluetooth:

A. Press and hold the power button 3 seconds, when the headphone is off, to power
it ON.

B. The blue/red LED light will turn on and flashes quickly to indicate it is ready to
pair.

C. Open the Bluetooth menu in your device’s Bluetooth settings

D. When your mobile phone searches the headphone, the pairing name is “FlinQ

Wireless On-Ear …. ”

E. Press this name and it will connect automatically, no password is needed. (if a
password is required please enter: 0000). After selecting the headphone you will
hear “Your headphones are connected” The blue LED light will flash 2x each 5
seconds to indicate it is successful connected.

Your headphones are ready to use!

Button operation instructions (make 1 – 13 clear on picture from the headphone’s
button):

1. To Power ON/OFF: Press and hold the POWER button around 3 seconds. You will
hear an audible voice message.

2. Previous song/ Volume - :

• In Bluetooth mode: 1x press = Previous song, long press = Volume down

• In SD Card / MP3 mode: 1x press = Previous song, long press = Volume

down

• In FM mode: 1x press = Previous FM Frequency, long press = Volume down

3. Play/Pause:

• When you receive a phone call in Bluetooth mode: 1x press = Answering
the call and ending the call. Long press = Reject the call. Quickly press 2x =
Last number redialing. To play/pause music = 1x press

• In SD Card / MP3 mode: 1x press = Play/Pause

• In FM mode: 1x press = Automatically searching the FM Frequency stations

and store’s it as it was been found.

4.Next song/ Volume +:

• In Bluetooth mode: 1x press = Next song, long press = Volume up

• In SD Card / MP3 mode: 1x press = Next song, long press = Volume up

• In FM mode: 1x press = Next FM Frequency, long press = Volume up

5.Mode:

1x press each time to change the mode between Bluetooth mode/SD Card MP3/FM
Radio and AUX line In.

Note:

Restart music or FM Radio: When a call is answered the music will stop
automatically. To start the music again after the call press the play button.

LED indicator:

• In Bluetooth pairing mode: The blue/red LED light will flash quickly to
indicate it is ready to pair. The blue LED light will flash slowly when the
headphone is successfully connected to your device.

• In SD Card / MP3 mode: The blue led light will flash slowly when activated.

• In FM mode: The blue LED light is flashing slowly when hearing the FM

radio and will flash quickly when searching the FM radio stations.

SD CARD/MP3 MODE INSTRUCTIONS:

A. Make sure the power is ON
B. Insert an SD/TF card (max 32Gb Class 10 or higher) with MP3 music and it

will start to play automatically. Or if needed press the mode key and switch
to SD CARD/MP3 mode manually.

C. 1x press the play button

AUX LINE-IN MODE INSTRUCTIONS:

• Insert the supplied AUX Cable and it will turn to AUX Line-In mode

automatically. It will now play any audio from your connected device. If not

done automatically please use the mode button to select it.

•

It supports; smart(phone) devices, Ipad/Tablets/Ipod/MP4/MP3/CD/PC
and other line out devices.

HIGHLIGHT NOTES:

• When the headphone’s are switched OFF and ON it will automatically re-

connect to the last paired device.

• Battery indication on iOS devices.

• Audio formats supported: MP3

• Maximum volume warning: A beep will be heard through the speakers.

• Power save function: If the headphones are not successfully connected

within 10 minutes, the headphones will automatically shut down.
Inserting an AUX cable will cut off the power supply and allows for listening

•

when low on battery.

Warning

1. Do not use the headset excessively and do not store them under heavy pressure. The

headset are not resistant to heat and water.

2. Keep the headset away from the WIFI router or other high-frequency equipment and

walls etc. to prevent interruption of signal reception.

3. Use the headset in working range (max. 10 meters). The effect will be significantly better

if there are no obstacles between the connected devices.

4. Use these Bluetooth headset with any device with Bluetooth stereo function.

5. The LED light turns red when charging starts.

6. When using the headset again, please keep them upright when you remove them from

the charging station to prevent damage.

：

Highlights:

POWER ON/OFF

SD / TF CARD

NEXT / VOL+

PLAY / PAUSE / ANSWER / REJECT

MODE FOR : BT / FM / MP3 / AUX

PREV / VOL-

AUX LINE-IN

FLINQ DRAADLOZE BLUETOOH

ON-EAR KOPTELEFOON

FQC8142

V1 Gebruikershandleiding

Voeg foto’s toe en details

Specificaties:

Bluetooth: V5.0 + EDR

Ondersteunde Bluetooth-protocollen: A2DP / HS / HFP / AVRCP

Stand-by-tijd: maximaal 450 uur *

Muziek afspeeltijd: maximaal 5-8 uur *

Spreektijd: maximaal 6 uur *

Batterij: 300 mAh lithiumbatterij

Opladen via USB: DC 5V IN 1000mA

FM-frequentie: 87,5-108 MHz

Draadloze frequentie: 2.401-2.480 GHz

Draadloze afstand: maximaal 10 meter

Frequentie: 20Hz - 20KHz

Luidspreker: 40 mm

Uitgangsvermogen: 35 mW

Nominaal vermogen: 2x 5 W

SNR: 88 dB

Oplaadtijd: ≤2 uur

Opmerking: * Afhankelijk van merk, telefoonmodel / type en volume-instellingen

GEBRUIKSAANWIJZING:

Oplaadmodus: