FLI Charge FLIway 40, FLIcase, FLIcoin, FLIcube Instruction Manual

Congratulations on your

FLI Charge purchase!

Now you can charge your electronic devices quickly

and conveniently using your FLI Charge charging pads,

smartphone cases and universal adaptors. All of the

products in the FLI Charge ecosystem have been designed

with ease of use in mind. FLI Charge transforms the way

you power your life – allowing you to keep all of your mobile

devices fully charged while reducing the hassle of power

cords and cables.

Please review the applicable operating instructions in

this manual prior to first use.

FLI CHARGE PRODUCTS

FLIway 40

FLIway 40

The FLIway 40 charging pad can charge and power

multiple devices at the same time up to a total of 40

watts. Conveniently charge phones, tablets, smart

watches and other mobile devices regardless of their

orientation on the surface of the FLI Charge charging pad.

1. Set Up

Place the FLIway 40 charging pad on a flat service

•

•

Plug the AC adaptor into a wall outlet

•
Insert the DC power plug firmly into pad connector

2. Operation - Charging your FLI Charge-enabled devices:

Once the FLIway 40 charging pad is plugged in, the indicator

•
light will turn on while the system status is checked. If the system
is functioning properly and there are no faults detected (i.e. keys,
liquid, metal objects or a finger on the surface of the FLIway 40
charging pad), the indicator light will turn o in 3-5 seconds.
You are now ready to charge your FLI Charge-enabled devices.

Once the FLIway 40 charging pad is plugged in, the indicator

•
light will turn on while the system status is checked. If the system
is functioning properly and there are no faults detected (i.e. keys,
liquid, metal objects or a finger on the surface of the FLIway 40
charging pad), the indicator light will turn o in 3-5 seconds.
You are now ready to charge your FLI Charge-enabled devices.
Simply place your FLIcase smartphone case, FLIcube module or
FLIcoin module anywhere on the FLIway 40 charging pad with
the constellation facing down. Please ensure that the FLIcase

1

smartphone case, FLIcube module or FLIcoin module make
firm contact with and lay flat on the FLIway 40 charging pad.
Charging will not occur if proper contact is not made between
the constellation and the FLIway 40 charging pad.

•

The blue indicator light will light up to show you that your device
is receiving power. If a fault is detected, the FLIway 40 charging
pad will shut o and the indicator light will blink red and then
stop illuminating. Once the fault is removed, the FLIway 40
charging pad will turn back on.

•

When not in use, the FLIway 40 charging pad will be in Sleep
Mode. In this mode, the FLIway 40 charging pad and the
indicator light turn o.

•

You may simultaneously power and charge several FLI Charge­enabled devices on the FLIway 40 charging pad.

•

Make sure to place only FLI Charge-enabled devices on the
FLIway 40 charging pad.

Devices that are not FLI Charge-enabled devices may not

•
receive power.

3. Maintenance and Usage

•

The FLIway 40 charging pad can charge several devices
(smartphones, tablets, smart watches, portable speakers, etc.) at the
same time including up to 8 smartphones. However, certain devices
or combination of devices may require more power than is available.
When this happens, the indicator light will blink red 3 times. Remove
the devices, one at a time, until the blinking stops.

•

If the indicator light blinks red 1 time, this means that a fault is detected.
Remove any foreign object or device to remedy the problem.

Please ensure that dirt or other contaminants are not on the FLIway

•
40 charging pad.

Charging will not occur if proper contact between the FLI Charge-

•
enabled device and the FLIway 40 charging pad is not made.

2

3

FLIcases

The FLIcase smartphone cases are designed to fit

various models of smartphones.

1. Installation

Separate the two pieces of the FLIcase smartphone case.

•

Carefully insert your smartphone into the FLIcase smartphone

•
case, making sure that the connector fits firmly into place.

Press firmly on each corner of the FLIcase to ensure proper fit.

•
The two pieces will lock together when properly installed.

2. Operation

Simply place your FLIcase smartphone case anywhere on the

•
surface of the FLIway 40 charging pad with the constellation
facing down. Please ensure that the FLIcase smartphone case
makes firm contact with and lays flat on the surface of the
FLIway 40 charging pad. Charging will not occur if proper
contact is not made between the constellation and the FLIway
40 charging pad.

To verify charging, the indicator light on the FLIway 40 charging

•
pad will turn on and the display on your smartphone will show
that the phone’s battery is charging.

•

In the event that you are without the FLIway 40 charging pad,
you can charge your smartphone via the microUSB connector on
the bottom of the FLIcase smartphone case.

4