OWNER’S MANUAL PN IENBL-111B DRAFT
OWNER’S MANUAL PN IENBL-111B DRAFT
CONTENTS
IMPORTANT INFORMATION 3
ABOUT IENBL DEVKIT 4
WHAT’S INCLUDED? 4
GET TO KNOW YOUR DEVKIT 5
HOW TO USE YOUR IENBL DEVKIT? 7
FAQS AND TROUBLESHOOTING 9
PRODUCT SAFETY, TIPS, AND PRECAUTIONS 10
PLACEHOLDER_ COPYRIGHTS AND OTHER NOTICES 12
OWNER’S MANUAL PN IENBL-111B DRAFT
IMPORTANT INFORMATION
Read these simple guidelines. Not following them may be dangerous or illegal.
COMPATIBILITY
The iENBL devkit is tested to work in multiple LoRa network operator and
gateway configurations. Please make sure your device is provisioned with a
network provider before deployment.
INTERFERENCE
All wireless devices may be susceptible to interference, which could affect
performance.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
BATTERIES, CHARGERS, AND OTHER ACCESSORIES
Use only batteries, chargers, and other accessories approved by Flex for use
with this device. Do not connect incompatible products.
KEEP YOUR DEVICE DRY
Your device is not water-resistant. Keep it dry.
OWNER’S MANUAL PN IENBL-111B DRAFT
ABOUT iENBL Devkit
iENBL is a multi-sensor IoT development platform embedded in a ruggedized
clamshell enclosure with focus in LPWAN (Low Power Wide Area Network)
technologies. iENBL supports an easy to use software packages, enables developers to
develop and prototype IoT applications very quickly and smoothly
The highly integrated iENBL combines a high-performance ARM Cortex M4
microcontroller with 512 MB of memory, the sensors required for most IoT applications,
the short-range communication WiFi and BLE solutions, a few actuators and the
aforementioned LPWAN technologies.
iENBL-111B supports on unlicensed LPWAN solutions LoRa and Sigfox technologies
Figure 1- iENBL devkit dimensions: 65 mm by 97 mm by 26 mm
WHAT’S INCLUDED?
iENBL Devkit with rechargeable battery
Downloadable documentation