Flexco EBC1, EBC1-220, CEBC1, CEBC1-220, EBC2 Operating Manual
...
Electric Belt Cutter
Safety and Operating Manual
for Corded and Cordless Models
For cutting rubber and elastomeric materials only.
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
is manual contains important information about product function and safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual available for
other users and owners before they use the power tool. is manual should be stored in a safe place.
www.fl exco.com
www.fl exco.com • Tel: 1-800-541-8028
WARNING
Electric Belt Cutter
Table of Contents
Main Components ...................................................................................pg. 3
Tool Speci cations ...................................................................................pg. 3
General Safety Rules .......................................................................... pgs. 4-7
Tool Preparation ......................................................................................pg. 8
Operation of Electric Hammer Drill ....................................................pg. 8
Electric Cutter Operation .......................................................................pg. 9
Tool Maintenance–Bearings ..................................................................pg. 9
Tool Maintenance–Blade Replacement ..............................................pg. 10
Logbook ..................................................................................................pg. 11
Spare Parts ..............................................................................................pg. 12
www.fl exco.com • Tel: 1-800-541-8028
—2—
Main Components (corded model shown)
Electric Belt Cutter
1. Housing
2. Blade Guard and
Cutting Guide
3. Carriage
4. Eye Bolt
5. Handle
6. Electric Hammer Drill
7. Circular Blade
8. Power Cord
9. Rear Carriage Bolt
10. Carriage Support Bolt
1
2
10
3
9
DO NOT carry tool by electric hammer drill handle. It is recommended that
you place tool in carrying case for traveling extended distances.
4
5
6
7
8
Tool Speci cations
EBC1
EBC1 / EBC1-220 CEBC1 / CEBC1-220 EBC2 / EBC2-220 CEBC2 / CEBC2-220
Specifi cations Imperial Metric Imperial Metric Imperial Metric Imperial Metric
Tool Description
Weight 30 lbs 13.6 kg 30 lbs 13.6 kg 40 lbs 18.1 kg 40 lbs 18.1 kg
Machine Housing Stainless Steel
Blade Material High Speed Steel
Blade Size
Drill Description
Drill – Make and Model Hitachi, DV16 V Makita BHP 454 Metabo, SBE750 Bosch 38636
Power Source / Charger Source EBC1, CEBC1, EBC2, and CEBC2 use 120V. EBC1-220, CEBC1-220, EBC2-220, AND CEBC2-220 USE 230V
Drill – Current 6.0A 2.2A 6.2A 2.3A
Cutting Capacity
Cutting Capacity – Rubber Belt Up to 1 inch Up to 25 mm Up to 1 inch Up to 25 mm Up to 2 inch Up to 50 mm Up to 2 inch Up to 50 mm
Cutting Capacity – PVC Belt Up to 360 PIW Up to 630 EP Up to 360 PIW Up to 630 EP Up to 1140 PIW Up to 2000 EP Up to 1140 PIW Up to 2000 EP
Material Hardness 25° - 90° Shore A
ø 6.70 x .157, hole
ø .787, key way
.236 (in)
ø 170 x 4, hole
ø 20, key way
6 (mm)
ø 6.70 x .157, hole
ø .787, key way
.236 (in)
ø 170 x 4, hole
ø 20, key way
6 (mm)
ø 8.66 x .236, hole
ø .984, key way
.315 (in)
ø 220 x 6, hole
ø 25, key way
8 (mm)
ø 8.66 x .236, hole
ø .984, key way
.315 (in)
ø 220 x 6, hole
ø 25, key way
8 (mm)
—3—
Electric Belt Cutter
General Safety Rules
–Save ese Instructions–
Signal words:
“DANGER” indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury. e signal word is
limited to the most extreme situations.
“WARNING” indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
“CAUTION” indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury. It may also be used to
alert against unsafe practices.
Safety Symbol
!
is international safety symbol is used to
identify and call attention to speci c safety
matters.
Safety Information
To Avoid Severe Personal Injury or Property
Damage, read carefully and understand the
following Safety Precautions.
1. WORK AREA
!
CAUTION
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
!
DANGER
Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust of fumes.
!
CAUTION
Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
!
WARNING
Never leave tool until it comes to a complete stop.
!
CAUTION
Operation of gear units is permitted at ambient
temperatures between -4°F and +104°F (-20°C
and +40°C). However, for temperatures between
-4°F and +14°F (-20°C and -10°C) unit may
only start up a er it has been progressively and
evenly pre-heated, or otherwise initially operated
unloaded. Load may then be connected to the
output sha when the gear unit has reached the
temperature of 14°F (-10°C) or higher.
www.fl exco.com • Tel: 1-800-541-8028
—4—
Loading...