Flex VCE 44 H AC-Kit User Manual

FLEX-Elektrowerkzeuge GmbH

Bahnhofstraße 15
71711 Steinheim
Phone [phone]
Fax [phone]
[e-mail]
www.flex-tools.com

Safety vacuum cleaner with automatic filter cleaning system, 42 l, class H

VCE 44 H AC-Kit

Safety vacuum cleaner with automatic filter cleaning system, 42 l, class H

+ Adapter plate that can be installed without using tools, for fixing L-BOXXes and Tanos
systainers on the head of the vacuum cleaner
+ The high-performance turbine ensures both a high suction capacity and a high vacuum. The
outcome is an excellent extraction result
+ Continuous automatic flat filter cleaning ensures no loss of suction
+ The flat-fold filter with Teflon coating / nanocoating allows optimum use of the tank volume
+ With permanent socket and electronic automatic on/off switch
+ Flow sensor technology monitors the flow rate and emits a visual and audible signal to
indicate any drop below the statutory minimum value of ≤ 20m/s
+ Visual and audible signal for monitoring the HEPA filter
+ The flow rate control via the rotary switch minimises possible vacuums on the surface during
intermediate and finish sanding
+ Suction diameter selector switch for adjusting the optimum flow rate
+ Suitable for wet vacuuming: with electronic liquid level control
+ Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun)
empties any remaining dust in the vacuum hose
+ Double-walled sturdy container with integrated grip recess for emptying the container easily
+ Dust-protected antistatic finish prevents electric charging of the suction hose
+ Equipped with large wheels and two swivel guide rollers made of metal
+ Separate motor air cooling duct with coarse dirt filter. Protects the turbine against the
ingress of ambient air and thereby extends the service life. (Fine dust filter PES available as an
accessory)
+ Simple filter change without removing the suction head
+ With hose retainer and expander for easy, quick securing of the power cable
+ With 4 clamping loops (2 on each side ) for attaching straps and a giraffe holder
+ Safety vacuum cleaner class H: suitable for all dusts with OEL values < 0.1 mg/m³ with
additional audit "asbestos" by TRGS 519
+ Suitable for dry, non-flammable dusts that are harmful to the health and carcinogenic
substances incl. asbestos
+ Ideal to remove mould, restore roofs and walls insulated with mineral wool. Sanding dust

Order number 446.025

Technical attributes

Power input P. max. 1400 watt
Max. volume flow 4500 l/min
Max. vacuum 25000 Pa
Filter surface 5000 cm²
Container volume 42 l
Liquid capacity 26 l
Power take off 100-2400 watt
Size ( W x L x H)

Cable length 7,5 m
Weight 17,6 kg

Standard equipment

Antistatic suction hose Ø
32 mm x 4 m with clip
connection including
auxiliary air control and
suction adapter SAD-C
D25-32AS

1 L-BOXX® holder 445.169
1 flat-fold filter PES L/M/H 445.118
1 flat folded filter class

H/HEPA 14
1 safety filter bag 445.096
1 adapter Ø 25-32 mm, anti-

static
Hose clip 2 pieces
1 cleaning set 445.053

565 x 385 x
650 mm

406.708

445.126

445.029

FLEX-Elektrowerkzeuge GmbH

Bahnhofstraße 15
71711 Steinheim
Phone [phone]
Fax [phone]
[e-mail]
www.flex-tools.com

from wooden surfaces that have been impregnated with hazardous wood preservatives and from
painted surfaces with paint that contains substances such as lead, nickel, cadmium, chromium,
zinc chromate, etc.

Powered by TCPDF (www.tcpdf.org)