Flex TPO Clad Metal User Manual

Product Data Sheet

FLEX TPO CLAD METAL

PRODUCT DESCRIPTION

Flex TPO Clad Metal is a 24 gauge galvanized steel sheet that is coated with a layer of .035” non­reinforced TPO flashing membrane. Flex TPO membranes are hot air welded directly to the TPO Clad
Metal for flashing and perimeter edge roof installation details. The Flex TPO Clad Metal is manufactured
in 4’x10’ sheets.

APPLICATIONS

The metal sheets are cut to appropriate sizes and fabricated into the profiles required for metal drip edges
or other configurations required for roof flashing detail work.

BENEFITS

Flex TPO membranes are hot air welded directly to the clad metal for a watertight and permanent
installation.
Eliminates the use of glued, taped or self- adhered cover strips.

INSTALLATION

Install Flex TPO Clad Metal with a 1/8” to 1/4 “ space between adjoining sections.
Cover joints with 2” wide aluminum or duct tape prior to hot air welding a 6” wide piece of Flex TPO
Trim Strip over joint. Hot air weld to be a minimum of 1 ½” in width.

LIMITATIONS

Store clad metal in a cool, shaded area and cover with light colored, breathable, waterproof tarps. Flex
TPO Clad Metal that has been exposed to weathering will require cleaning with Flex Weathered
Membrane Cleaner prior to hot air welding.

PHYSICAL CHARICTERISTICS

Sheet Size 4’x10’ (1.2m x 3.0 m)
Weight 1.1 lb/ft² (5.4kg/m²)
Color white, tan or gray
Membrane Thickness 0.035” (0.9mm)
Steel Thickness 24 gauge (0.6 mm)
Steel Type G90 Galvanized Steel
Packaging 25 sheets per pallet

_____________________________________________________________________________________________________

Flex Membrane International Corp. 2670 Leiscz’s Bridge Road, Suite 400, Leesport, PA 19533

Tel: [phone] Fax: [phone] www.FlexRoofingSystems.com

Page 1