Flex FLT Roof Edge User Manual
Flexiock FLT Roof Edge
Fully Adhered or Mechanically Attached Single-Ply Version
Warranty:
Testing:
Standard Sizes:
Available Materials:
Competitively Priced:
Efficient Design:
The entire roof system is covered under one warranty and inspected after the project is complete to
assure proper installation. The system is inspected after the project is com plete to assure proper
installation. This ensures protection for the most vulnerable area of the roof against failure due to
extrem e w ind up lift pressures.
• Tested per ANSI/SPRI ES-1 Standard to a design pressure of 200 Ibs./ft^ to com ply with the
International Building Code.
• Factory Mutual 1-225 approved for wind up lift protection when using the .050" formed rail.
Sizes range from 4" up to 8" face heights to accommodate multiple nailers and coverage
requirem ents.
•4"
•5"
• 6 V2"
• 8"
Covers can be manufactured in 24 ga. steel and .040" aluminum.
Receive factory engineered quality, economically priced for cost conscious projects.
The product is provided in 12'-0" lengths with pre-punched holes for quicker installation and lower
labor costs. The fastening holes are slotted to allow for proper therm al movement of the materials
and ensure correct fastener placement and spacing.
Colors:
Accessories:
Also Included:
Choose among a wide range of standard colors and finishes that m atch any job requirem ent. Custom
colors and anodized finishes are also available. A 20 year Kynar 500® finish warranty is available
upon request.
Factory fabricated miters, scuppers and drainage accessories provide a cleaner, more aesthetically
pleasing appearance. This eliminates the need for field fabrication, providing tim e and labor savings.
All fasteners are included and w ill arrive to the job site w ith the product.
features & benefits
54
p: 800-969-0108
f: 610-916-9501
Fi
APPROVED
1-225
ANSI/SPRI ES-1 DESIGN PRESSURE OF 200 psf 24 GA. AND .040" MATERIAL
FLEXLOCK FIT ROOF EDGE
FULLY ADHERED OR MECHANINCALLY ATTACHED SINGLE-PLY VERSION
Fascia is to be installed per Specifications and Flex's
Installation Instructions Dwg. # 28110-11368
FLEXLOCK FLT ROOF EDGE
DIMENSIONS
PRODUCT
ID, NO.
□ ME-40
□ ME-50
□ ME-65
□ ME-80
H
DIM
4" (102 mm)
5" (130 mm)
6 1/2" (168 mm)
8" (206 mm)
X
DIM
2 7/8" (73 mm)
3 7/8" (102mm)
5 3/8" (140 mm)
6 7/8" (178 mm)
Fabrication will proceed only after receipt of
signed print approval.
Print Approval:
Architect and/or contractor shall verify all
dimensions, sizes and quantities. All
products to be installed in strict accordance
with Flex's printed instructions.
Approved by:
Date:
PROJECT:
ARCHITECT:
ROOFING CONTRACTOR:
REPRESENTATIVE/DISTRIBUTOR:
_____
NAILER
COVERAGE
1 NAILER
2 NAILERS
3 NAILERS
4 NAILERS
MATERIAL:
Color:
Finish:
QUANTITIES:
_________
______
Lineal Feet 12'-0" (3.65 m) Lengths
Outside Miters @ (
Inside Miters @ (_
. Overflow Scupper Style
. Spillout Scupper Style
. Downspout Scupper Style
(
_____
Customer Service: Phone: 800-969-0108 Fax:610-916-9501
DATE: 12/13/10
DRN BY: JJC
CKD BY: SAK
FASCIA COVER PROVIDED
WITH 1" (25 mm) LAP JOINTS
24 Ga. (.65 mm) Galv. Steel
.040" (1.01 mm) Aluminum
OTHER
___________________
______
°)
_°)
_____A____
_____A____
____A____
Size A: Tapered 1 1/2" (38 mm) Drop
X_
B: Flat
SHT# OF
DWG# 28010-11367
B
B
B
p: 800-969-0108
f: 610-916-9501
print approval
55
Loading...