Page 1
INSTRUCTIONS
FOR
YOUR
PRODUCT
Wall Hanging Instructions
Locate desired position
on wall for hanging.
If wall stud is present,
drill screw(s) dir
into stud,
to step 4.
If no stud is f
f
ollow steps 1-4.
Repeat these steps as
needed for multiple
hangers. Be sure holes
are level and spaced
correctly by measuring
the distance between
keyhole slots (on
center). Check your
markings with a level
before drilling.
and pr
ectly
oceed
ound,
Step 1 Step 2
Using the drill bit size
recommended on your
wall anchor hardware, (not
included) drill a hole equal
to the depth of your anchor.
*Anchor hardware should
be rated for the weight
of your artwork or more.
Insert anchor into hole.
Step 3 Step 4
Please note, these
instructions are meant
for common drywall
walls. If other conditions
are present, check
with your local
hardware store for
recommendations
on hardware and
hanging methods.
Insert screw into anchor
leaving a minimum of
of mounting screw
exposed from wall.
5
Line up screw with the round
opening of the keyhole slot,
then slide artwork down
so screwhead is locked
into place.
/16
”
T H A N K YOU
P U R C H A SE
YOUR
FOR
Loading...