![](/html/34/34f8/34f8bc0c73c261d5e6665cd79341c818c627c826da56cb3490ddf27d7b0f004e/bg1.png)
Instructions Manual / Manual de Instrucciones
Office
Phone: 1-800-503-7534 / 305-868-1603
Fax: 305-866-2704
www.skyfood.us sales@skyfood.us -
TOLL FREE 1-800-503-7534
Warehouse
Phone: 1-800-445-6601 / 973-482-5070
Fax: 973-482-0725
Salad Dryer / Secadora de Hojas
Model / Modelos
SDF-20
UG0020 - AUGUST /2011
![](/html/34/34f8/34f8bc0c73c261d5e6665cd79341c818c627c826da56cb3490ddf27d7b0f004e/bg4.png)
SUMMARY
1. Introduction
1.1 Safety
1.2 Main Components
1.3 Technical Characteristics
2. Installation and Pre Operation
2.1 Installation
2.2 Pre Operation
3. Operation
3.1 Operating Procedures
3.2 Cleaning
4. General Safety Practices
4.1 Basic Operation Procedures
4.2 Safety Procedures and Notes Before Switching the Machine On
4.3 Routine Inspection
4.4 Operation
4.5 After Finishing the Work
4.6 Maintenance
4.7 Advices
02
02
02
03
03
03
04
04
04
04
05
05
06
06
07
07
07
07
5. Analysis and Problem Solving
5.1 Problems, Cause and Solutions
5.2 Electric Diagram
01
08
08
09
![](/html/34/34f8/34f8bc0c73c261d5e6665cd79341c818c627c826da56cb3490ddf27d7b0f004e/bg5.png)
1. Introduction
1.1 Safety
When not properly used the Salad Dryer SDF-20 can be potentially
DANGEROUS. Servicing, cleaning or any other operation shall be made by trained people. The
following instructions must be observed in order to avoid accidents.
1.1.1 Always unplug the machine when cleaning, servicing or when any other
operation is needed.
1.1.2 Never use tools that do not belong to the machine during operation.
1.1.3 Never touch the Basket Nº05 (Pic.01) during operation.
1.1.4 Keep hands off turning parts.
1.1.5 When reinstalling the Basket Nº05 (Pic.01) make sure it is perfectly fitted
on the Central Shaft Pin Nº02 (Pic.02) in order to prevent damages to the machine.
1.1.6 Take good care of this manual and have it handy for use at any time.
1.2 1.2Main Components
All components are made with carefully selected materials, in accordance with
Siemsen experience and standard testing procedures.
Picture - 01
01
Maximum Load Level
02
03
06
1- Lid
2- Pulse ON/OFF Switch
3- Base
4- Voltage Selector Switch 110/220V
5- Basket
04
02
6- Drain
05
Basket