Fleetminder MDVR4, MDVR8 User Manual

User Manual

4 & 8 Channel MDVR

Live video streaming mobile DVR

www.fleetminder.com.au

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Contents

1 SPECIFICATIONS................................................................................................................................................ 3

1.1 PRODUCT OVERVIEW ......................................................................................................................................... 3

1.2 KEY FEATURES: ................................................................................................................................................. 3

1.3 DETAILED SPECIFICATIONS ................................................................................................................................. 4

1.4 ELECTRICAL SPECIFICATIONS ................................ ............................................................................................. 5

2 DEVICE APPLICATIONS .................................................................................................................................... 6

3 INSTALLATION ................................................................................................................................................... 7

3.1 FRONT VIEW IMAGE ........................................................................................................................................... 7

3.2 DEVICE DIMENSIONS AND MOUNTING HOLES ....................................................................................................... 7

3.3 FRONT PANEL .................................................................................................................................................... 8

3.4 BACK PANEL ...................................................................................................................................................... 9

3.5 BOX CONTENTS ............................................................................................................................................... 11

3.6 POWER CABLE................................................................................................................................................. 12

3.7 ANTENNAS ...................................................................................................................................................... 12

3.8 ALARM INPUT AND OUTPUT .............................................................................................................................. 13

3.9 CAMERA ADAPTER CABLES............................................................................................................................... 14

3.10 HDD, SIM CARD, SD CARD INSTALLATION ..................................................................................................... 15

3.11 RECOMMENDED INSTALLATION HARDWARE ................................................................ .................................... 17

4 REMOTE CONTROL FUNCTION INSTRUCTIONS ...................................................................................... 18

5 DEVICE FUNCTIONS & OPERATING GUIDE .............................................................................................. 24

5.1 LOGIN ............................................................................................................................................................. 24

5.2 GENERAL SETTINGS ......................................................................................................................................... 24

General Setup - Date & Time ......................................................................................................................................... 25

General Setup -Vehicle Info ........................................................................................................................................... 25

General Setup - User Setup ............................................................................................................................................ 26

General Setup - Network Settings .................................................................................................................................. 26

General Setup - Display Settings ................................................................................................................................ .... 27

5.3 RECORD SETUP................................................................................................................................................ 27

Record – Main Code ...................................................................................................................................................... 28

Record – Sub Stream ..................................................................................................................................................... 29

Record – Record Plan ................................ .................................................................................................................... 29

Record – Mirror ............................................................................................................................................................ 30

Record – SD Record ...................................................................................................................................................... 30

Record – Alarm Rec ...................................................................................................................................................... 30

Record – Speed Record ................................................................................................................................................. 31

5.4 ALARM SETUP ................................................................................................................................................. 32

Alarm - Speed ................................................................................................................................ ............................... 32

Alarm – G Sensor .......................................................................................................................................................... 33

Alarm – Temperature ..................................................................................................................................................... 33

Alarm – Motion Detection ............................................................................................................................................. 34

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Alarm – Linkage ........................................................................................................................................................... 35

5.5 TOOLS ............................................................................................................................................................. 35

Tools - Format ............................................................................................................................................................... 36

Tools – Log Search ........................................................................................................................................................ 36

5.6 PERIPHERALS .................................................................................................................................................. 37

Peripherals – Wireless Setup ................................................................................................................................ .......... 37

Peripherals – Wifi Setup ................................................................................................................................................ 38

5.7 SEARCH – RECORD SEARCH ............................................................................................................................. 39

5.8 SYSTEM INFORMATION..................................................................................................................................... 39

APPENDIX 1: SERVER PLATFORM INTERFACE ........................................................................................................... 40

APPENDIX 2: COMMON PROBLEMS AND SOLUTIONS ................................................................................................ 40

1 Specifications

1.1 Product overview

Hard Disk Mobile DVR (Automotive) is a cost-effective, multi-functional device designed for video surveillance and remote monitoring of your mobile assets. It uses a high-speed processor, an embedded

Linux platform, and the most advanced technologies, such as H.264 Video Compression/Decompression, 3G network transmission technology and GPS positioning technologies. MDVR can utilise four/eight

channel video recording. Each channel supports CIF, HD1 and D1 image solution. Drivers' driving information, GPS data and alarm data is recorded on hard disk which is used as the storage device. The MDVR provides powerful auto black box features, installation flexibility and high reliability.

1.2 Key features:

4/8 channel video & audio synchronous real-time recording and playback 4ch D1@25fps , 8ch CIF@25fps , 8ch HD1@25fps , 8ch D1@12fps options. Internal 2.5 inch HDD. Supports max 1TB with professional hard disk damping technology. 3G network , such as HSUPA/HSDPA/WCDMA/EVDO is selectable. Built-in GPS module. Built-in G-sensor WIFI 802.11g b/g/n interface. Built-in 1 SD card for backup recording when HDD errors. 2 high speed USB2.0 interfaces, the front is used to export the record file. The back is used for mirror recording. 8 digital alarm inputs, 2 digital level output. Three RS485 interfaces, one RS232 interface. Built-in hard disk heat protection allowing operating environments from -40℃ - +85℃ Power supply: 8V-36V

fleetminder Mobile DVR User Manual (Vers. 2014-04)

1.3 Detailed specifications

Table 1 : MDVR Specifications

Items

Parameters

Specifications

System

Language

English

Operation Menu

Graphical User interface（OSD menu）

Password

Users Password/ Administrator Password

Video

Video input

4-CH video input 1.0Vp-p，75Ω

Video output

1-CH composite video output 1.0Vp-p，75Ω 1 VGA output

Video Display

1 channel or synchronous 4 channels

Video Signal

PAL, NTSC

Video Compression

H.264 Main profile PAL:100fps at D1, NTSC: 120fps at D1

Audio Audio input

4-ch Audio input

Audio output

1-ch Audio output

Recording mode

Audio & Video sync Recording

Image Processing & Storage

Image Resolution

4 D1 , 4 HD1, 4 CIF options

Video Compression

H.264 Main profile

Video bit rate

CIF: 1536Kbps ~ 128Kbps，4 levels optional. Highest: 0 level Lowest: 3 level HD1: 2048Kbps ~ 512Kbps，4 levels optional. Highest: 0 level Lowest: 3 level D1: 4Mbps ~ 1Mbps， 4 levels optional. Highest: 0 level Lowest: 3 level

Audio Compression

ADPCM, G.726, G.711 Options Audio Bit rate

8KB/s

Storage

Support One HDD Max 1TB Support One SD Card Backup when HDD is error. Support Mirror Recording with a expand HDD

Alarm Alarm input

8 digital level inputs，below 4V is low level alarm，above 4V are high level alarm

Alarm output

2 digital level outputs，output voltage level:12V

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Communication Interface

RS485 Interface

Support 2-RS485 interface

RS232 Interface

Support 1-RS232 interface

WIFI Interface

Support 802.11b/g/n

Extended interface

Support connecting LCD control panel via extended interface

Audio amplifier interface

Support Stereo Audio output, it can drive a 20W speaker directly 3G

HSUPA/HSDPA/WCDMA/EVDO Optional

GPS

Built-in GPS module. The geographic coordinates and the vehicle speed can be recorded to the hard disk and also can be transmitted to the CMS.

Acceleration Sensor

Embedded acceleration sensor

Software

Playback

Playback Software is used to playback video file, GPS track, G-sensor, and alarm information.

CMS

Center vehicle management software platform, it can manage 20,000 devices at same time. Additional server(s) are required for more devices.

Software Upgrade

Supports Flash disk firmware updates

1.4 Electrical specifications

Table 2: MDVR Electrical Specifications

Items

Parameters

Specifications

Power input

+8-+36V

＋8V～＋36V, When long-term under 8V, or long-term over 36V, will enter auto power off (protected mode).

Power output

12V

12V（+/-0.2V）， Max:3A.

ACC Detection ≤4V

Power OFF

≥5V

Power ON

Video input Impedance

75Ω

75Ω for each video input impedance

Video output Volt

2Vp-p

Output 2Vp-p CVBS analog signal, displayer device input need 75Ω impedance to fit it。

I/O interface 0—4V

Low level alarm

4V

High level alarm

Operating Temp

-40℃-75℃

In a well-ventilated environment.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

2 Device Applications

This product can be used for video surveillance and remote monitoring for regular or special vehicles such as buses, logistic vehicles, trucks, long-distance coaches, taxis, tankers, cars, school buses, police cars, patrol cars etc.

The MDVR products application connection diagram:

Figure 1-1

MDVR Schematic diagram

fleetminder Mobile DVR User Manual (Vers. 2014-04)

3 Installation

3.1 Front view image

3.2 Device dimensions and mounting holes

fleetminder Mobile DVR User Manual (Vers. 2014-04)

3.3 Front panel

Table 3 : Front Panel definition

Interface

Items

Description

Video out

AV-OUT

Video Audio and 12V out analog output

LED

REC

Recording LED. Light on when recording

ALAM

Alarm LED. Light on when the alarm function has been enabled

HEAT

Light on when in hard drive heating mode

3G

Light on when 3G module installed and working

PWR

Power LED

SD

Light on if SD card is installed

HDD

Light on if HDD is installed, flashing when recording

GPS

GPS signal LED. Light on when GPS module installed and working.

IR receiver

IR

Receive remote control signal

Electronic key

LOCK

When locked the MDVR device will power on. When unlocked the device will shut down and allow the removal of the hard drive, SD card and SIM card.

USB Port

USB 2.0

For firmware upgrades and configuration, as well as allowing copying of video data.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

3.4 Back panel

4 channel MDVR back

8 channel MDVR back

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Table 4: Back panel interface definition table

Interface

Connector

Description

3G Antenna Interface

3G

3G Antenna Interface

Wifi Antenna Interface

Wifi

Wifi Antenna Interface

GPS Antenna Interface

GPS

GPS Antenna Interface

Power Input Interface

POWER

Power input interface

I/O Serial AV-out interface and speaker

I/O & RS485 & RS232 AV-OUT

Switch input interface，high level（>4V) input vehicle speed pulse signal , differential input voice docking function

Network Interface

RJ45

Insert network cable. The LED will light on when network is connected successfully

Serial Interface

RS485

2 RS485 interface

Printer Interface

MCU/ICP

System debugging information interface

AV-IN (4 channel)

CAM 1.2.3.4

Video & audio input and 12V out

AV-IN (8 channel)

CAM 1.2.3.4.5.6.7.8

Video & audio input and 12V out

fleetminder Mobile DVR User Manual (Vers. 2014-04)

3.5 Box contents

After unpacking, please check the device for damage. If there is contact the fleetminder office. Cross check this list with the device and its accompanying accessories.

Table 5: Box contents

Mobile DVR Packing List

Item

Specifications

Unit

QTY

MDVR device

pcs 1 Accessories Box

pcs 1 Power Line-6PIN

6PIN Big557 L=200mm

pcs 1 Alarm Line-24PIN

AMP24PIN ， L=200mm

pcs 1 Remote Control

pcs 1 HDD Case

pcs

1

Connecting Line

4PIN Air connector, RCA/BNC converter, DC L=200mm

pcs

4（According to

demand）

Electronic Key

pcs 2 Desiccant

pcs

1

Pearl Cotton

pcs 2 GPS Antenna

G503 L=5m

pcs 1 3G Antenna

3G Antenna

pcs 1 Wifi Antenna

Wifi Antenna

pcs 1 Protective cover

pcs

1

Screw M3

KM3*5mm

pcs

4

US-made screws # 8

AC #8*9MM

pcs

1

Allen wrench

3#

pcs

1

fleetminder Mobile DVR User Manual (Vers. 2014-04)

3.6 Power cable

One end is a 6pin white plug, it connects with the 6pin white socket on the MDVR device back panel. The red and black cables are directly connected to the vehicle's battery. Red cable to positive, black cable to negative. Yellow cable is connected to the ignition. The device will automatically start when the vehicle’s ignition is switched on, and turned off* when the ignition is off (*delayed shutdown feature - depending upon the configuration settings the MDVR can be programmed to remain on for up to 180 minutes).

Notes:

1）Before connecting, confirm the power voltage is between 8V—36V otherwise the MDVR device will not function. 2）Ensure that the power cables are insulated to prevent short circuiting. 3）Power connection must be made directly to the battery. Do not use the bond strap for grounding as it will produce negative pulses that can interfere with the device's normal operation. 4）The yellow cable must be connected to the vehicle ignition, otherwise the device will not be able to execute the delayed shutdown and the final moment of the video will be lost;

3.7 Antennas

GPS antenna

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Wifi antenna 3G antenna

3.8 Alarm input and output

The device has 8 alarm input and 2 alarm output interfaces. Alarm input detection is level detection. Various states of alarm level can be detected while the vehicle is in motion, such as braking, steering horn etc. Below is a diagram that shows when the braking pedal is depressed, the MDVR would be able to detect the high level, otherwise, just detect the low level.

Alarm outputs are level output drive capability for the 200mA. If you want to drive a power device that requires more than 200mA, then you must connect an external relay. Shown below is the Alarm output photoelectric alarm wiring diagram.

24V

MDVR alarm output

fleetminder Mobile DVR User Manual (Vers. 2014-04)

3.9 Camera adapter cables

4 Pin converter BNC composite video cable

8 channel wiring cable, A is the first camera, B is the second

fleetminder Mobile DVR User Manual (Vers. 2014-04)

3.10 HDD, SIM card, SD card installation

Unlock the MDVR with the key, insert the HDD box (with the installed hard drive) into the hard drive slot.

INSERT / REMOVE THE HDD BOX

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Squeeze the latch lever and pull to remove

the hard drive box from the MDVR device

Mount the hard drive into the hard drive box

(if replacing the drive. Pre-installed by fleetminder)

fleetminder Mobile DVR User Manual (Vers. 2014-04)

SIM card removal / installation

The SIM card slot is located on the communication board accessed from the front of the MDVR device. Push to insert the SIM card. Also push to remove.

SD card removal/installation

The SD card slot is located on the communication board accessed from the front of the MDVR device. Push to insert the SD card. Also push to remove.

3.11 Recommended installation hardware

ITEM

NAME

Power wire and ignition yellow wire

Accessory

wires

Self-

tapping

screws or

bolts

Insulating

electrical tape

Cable ties

Flame retardant corrugated pipe

(optional)

fleetminder Mobile DVR User Manual (Vers. 2014-04)

4 Remote Control Function Instructions

There is no control button on MDVR panel, requires use of the remote control to operate the device.

*PTZ = Pan Tilt Zoom (camera)

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Key-press & function as below:

Digit keys zone：【0－9】key：Under settings, use for select digit. During playback and preview. 1, 2, 3, 4 is for switching of the channels

【＋】【－】key：For increment or decrement value 【ENTER】key：Under settings, means select and save

On playback condition, pressing ENTER will reveal parameters in OSD OVERLAY menu when connected to an external LCD screen.

Table 6 : Function keys on remote control

Startup/power off

Press this button twice for reboot (soft start key)

LOGIN

When setting password，press LOGIN input password. Additional logins can be created. We recommend setting a supervisor or administrator password to reset forgotten user logins.

INFO

Display information

Digit keys 1,2,3,4

Switch between 1-channel and 4-channel version. Press once, show 4-channel. Press digit key 1,2,3,4, can separately switch to CH1,CH2,CH3,CH4

RETURN

Return to exit current menu (back button)

PAUSE / STEP

When playing back the recording, press STEP which will step through the video. To pause, press PAUSE. Press play key to resume playback.

GOTO

When playing back the recording, pressing GOTO will jump to the entered elapsed time.

FRAME

Pressing the FRAME key, will play a video FRAME.

（PLAY）

PLAY key, （when PAUSE, it will show still image）

FWD

FWD for playback recording, 4 levels: 2X，4X，8X，16X

REW

REW for playback recording, 4 levels: 2X，4X，8X,16X

■

Stop manual recording key

●

Start manual recording key

AUTO, PRESET, ZOOM+/-, FOCUS+/-, IRIS+/-, PTZ, PRESET, RECALL, BRUSH

Pan-Tilt-Zoom (PTZ) video camera function keys

F1, F2, F3

F1 is shortcut key，F2, F3 are spare keys. (Reserved for future)

fleetminder Mobile DVR User Manual (Vers. 2014-04)

5 Device Functions & Operating Guide

5.1 Login

5.2 General Settings

Figure 4-6 Figure 4-7

fleetminder Mobile DVR User Manual (Vers. 2014-04)

General Setup - Date & Time

1．Date Format: Press "ENTER" drop-down menu to use the arrow keys to select the output format of date (year-month-day, day-month-year, and month-day-year). To modify the time and date: move the cursor to the number which needs modification and directly press the corresponding number keys on the remote control, press the save button after set.

2. Timing Mode: There are two time management options - GPS time or manual set time. When selecting GPS time, the time will update from the GPS satellites.

3. Operating menu timeout (OPR): three options--1 minute, 5 minutes, 15 minutes for choosing to set how many minutes later will automatically exit the menu after entering the menu. General settings menu interface

5. Power Mode: the ignition mode / timer mode, the ignition mode is that MDVR began to start up after vehicle starts its key, this operation is recommended as the preferred default starting-up. timer mode is

the operating mode of startup and shutdown at the point of time set by the user.

6. Shut Down Delay: Either the ignition mode or timer (Shut Down Delay) mode, as long as the wiring is correct, you can set the shutdown delay, delay off times range from 5 minutes to 180 minutes, MDVR will continue to record video by the delay off set time before shutting down.

General Setup -Vehicle Info

1. Device No.: user sets a unique device number to each device, which will automatically display on the right of the number input box. The device number is 5 digits & characters, digits are effective. If it is 3G device, it is strongly suggested to set a unique device number, because a server requires only one device number.

2. Vehicle identification number: this number is recommended to be set during installation, because the vehicle identification number will be superimposed onto the video during video encoding to be strong video evidence. If you do not enter the vehicle identification number, then it will show 00000 in default. For detailed input method, please refer to Chapter 3.2

3. Line number, company name, the name of the driver can fill out as demand

fleetminder Mobile DVR User Manual (Vers. 2014-04)

General Setup - User Setup

1.Password effective settings to select on or off

2.Only administrators have permission to modify the passwords of users and administrators. Ordinary

user’s password is initially set as 000000, and the

initial password for administrator is 111111. When password change finishes and exit menu, it will need to use new password to log in again, the login screen shown in Figure 4-3.

General Setup - Network Settings

Network setup interface is shown in Figure 4-11

1.IP address Mask Gateway etc are LAN network setting after plugging in the network cable, there is no need to input if you do not use them.

2.Server’s IP address is the one MDVR host using

3G to report to gServer platform central server, which generally is the public fixed IP, the IP address must be set up, or else 3G host cannot report to platform; this requires our host can support 3G; this menu will no need of setting if the host is without 3G module.

3.Control port: set to be the port number of the gateway server, generally the default is set to "6608"port

fleetminder Mobile DVR User Manual (Vers. 2014-04)

General Setup - Display Settings

1 RCA: Select video input system according to the camera format, PAL or NTSC system. 2 Video output format is selectable between PAL and NTSC. 3 Four-channel video preview can be separately on or off under the straight-through screen. 4 Date, time, speed, hard disk temperature, carnumber, IO-state, GPS location information can be set whether encoded into the video file or not, and can be set whether displayed under the straightthrough screen.

5.3 Record Setup

1. Selectable record type: common record or record I frame;

fleetminder Mobile DVR User Manual (Vers. 2014-04)

2. Selectable record mode: boot record / alarm record / timer record;

3. Selectable packet time: 15/30/45/60 minutes, which stands for the time period how long the video file will become a packaged file.

4. Automatically overwritten can be selected to on / off, when on, the previous video files will be automatically overwritten if the hard disk space is less than 2G as well as the mirror video disk & SD card space is less than 300M,;

5 Alarm pre-record time: when alarm occurs, the recording before the alarm occurs will be packed to be included

into alarm record (range 0-30min);

6 Alarm recording delay: when alarm stops, the recording after the alarm stops will be packed to be included into

alarm record (range 0-30min) to form an alarm recording file;

7. Alarm out sec: when alarm occurs, the continuous output time of an alarm after connected to an external alarm device, the output time (5S - 255S);

8 Alarm file lock time is the storage time for alarm video to be saved on the hard disk, the mirror disk, SD card; in

protected storage time, the alarm recording will not be overwritten even if the SD card is full; there are optional 1/3/5/7/10/15/30/45 days under the drop-down menu, please set the appropriate number of days according to the hard disk capacity.

Record – Main Code

1. Enable: On means open the recording function of this channel, off means not recording. When some channels do not need record or video recording, you can switch off the channel in order to save the storage capacity of the storage device;

2. Resolution: optional D1/HD1/CIF;

3. Frame rate: PAL is with adjustable 1-25 frame, full frame rate is 25; NTSC is with adjustable 1-30 frame, full frame rate is 30;

4. Quality: optional level 1-8, level 1 is with the highest quality 1, while level 8 with the lowest quality; the quality setting (good or bad) has a direct

impact on the effect of record playback. Under the same resolution, the higher the quality, the clearer the record. The record file will obviously take up a relatively large space;

5. Audio: audio channel can be set on or off, if on, there is sound from the corresponding channel during record

playback, maximum two-channel audio can be opened.

Note: The main code plus mirroring video can support 6 full frame D1 record.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Record – Sub Stream

Sub-stream is important parameters when video and

data are uploaded to the network through 3G, and

its settings are related to the clear and smooth

watching effect of video on CMS platform, of

course, network transmission mostly depends on

the uplink and downlink rate of local network.

1. Video resolution can be set to be CIF or QCIF;

2. Selectable frame rate :1-25;

3. The bit rate can be set to dynamic bit rate (VBR)

or constant bit rate (CBR), optional 16-384bit / s

4. Default setting is bit rate 96, frame rate 10. But

this can be set according to your own network. If

the network bandwidth is good enough, then the frame rate and bit rate can be set higher.

Record – Record Plan

Recording schedule (24 hour)

1. If the timer recording mode is selected in basic

setting, it is needed to set a regular time period. Two

time periods can be chosen. Move the cursor to the

desired time period, then input by pressing the

number keys on the remote control. Timer

recording mode is not commonly used; customers

can use it according to actual situation. Most

customers chose to boot recording and alarm

recording.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Record – Mirror

Mirror record is used as a record backup to prevent

possible record failure caused by a hard disk error.

The mirror parameter settings are the same as the

main video parameter settings.

Record – SD Record

Setting the SD Record ‘Rec-backup’ feature to ON will allow recording to the SD card when the hard disk is not functional due to vibration or other reason.

Record – Alarm Rec

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Under normal circumstances, for example: you can

set the resolution of the main code to be HD1 or CIF,

frame rate set to be 10, the quality set to be 4, when

alarm triggers recording, alarm recording can start

in accordance with the set high-quality video

parameters.

1. Corresponding record “On” means the

corresponding alarm recording function is on;

2. Optional resolution D1/HD1/CIF;

3. Frame rate: PAL with frame 1-25, NTSC with

frame 1-30;

4. Adjustable video quality:1-8;

5. Audio: this can be set whether to open the audio

of the record, if on, then the audio will be recorded into the record file.

Record – Speed Record

1. Set the speed threshold of recording;

2. Set the four-channel record enabled, on means

open the record while off means close the record;

3. When the speed exceeds the speed threshold, the

channel will not record with enable off, only

channel with enable on will record.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

5.4 Alarm Setup

Alarm settings Sensor Settings

1. Users name the custom sensor according to the IO interface when install MDVR; for example, to change the name "IO1" to be Chinese 'front door, brake' etc, you can press the 'ENTER' key and then input under the soft keyboard state;

2. Enable on means this sensor turns on, the device supports up to 8 sensor inputs, these alarm input is generally connected to the circuit of car, such as door open/close button, brake lights, turn signals, etc., they are in effective when sensor input is high level , users generally use higher than 4V high level to trigger alarm. Note: less than 4V is low level, but IO-5 and IO-6 require negative level to trigger alarm;

3. When selecting type to be event, the record file is a normal record; when selecting the type of alarm, the record file type is alarm;

4. When an alarm is generated, it also can be sent to center CMS Server platform to record alarm information.

Alarm - Speed

1. There are two options of Speed Source:

"GPS" and "vehicle", if selecting the “GPS”,

the speed of the vehicle can only be sent to the device when the device has the GPS module and GPS signal, the vehicle can get the vehicle speed information by GPS. 2 If selecting the "vehicle" to get the speed, you need to connect to the pulse sensor to calculate the speed ratio (coefficient = pulse / speed), the pulse sensor connects to the device port SPEED-A and SPEED-B two lines, and the speed ratio is measured according to the set

speed and pulse getting during vehicle traveling. 3 Speed unit KM / MPH can be switched, high-speed limit threshold means the maximum speed of the speed limit, if you turn on the alarm, the alarm will be generated when the speed exceeds the threshold, alarm information can

fleetminder Mobile DVR User Manual (Vers. 2014-04)

also be transmitted to center CMS Server platform for recording ;

4. When selecting type to be event, the record file is a normal record; when selecting the type of alarm, the record file type is alarm.

Alarm – G Sensor

1. Enable on means this sensor turns on;

2. Calibration is required before G-Sensor setting; calibration is to clear X / Y / Z parameters. GSensor can be understood as a three-dimensional X / Y / Z axis, which respectively stands for three groups of states: upper and lower, left and right, front and rear, uniform has no effect, and the GSensor setting is mainly to set a threshold value, which needs to be determined. Generally speaking vehicle’s instant acceleration is relatively large in case of slam the brakes on, crash, acceleration and sharp turns, whose intuitive reflection is threshold

beating, and PC displays X \ Y \ Z three states by waveform when playing back. When an alarm is generated, it also can be sent to center CMS Server platform to record alarm information. 3 When selecting type to be event, the record file is a normal record; when selecting the type of alarm, the record file type is alarm.

Alarm – Temperature

1.Two temperature degree units: Celsius ºC and Fahrenheit ºF

2. Enable on means this sensor turns on;

3.Temperature is sent back to the device by a temperature sensor. As long as you set high or low temperature alarm threshold and turn on enable, when the temperature is above or below the threshold, the device generates an alarm, which can also be transmitted to the central CMS Server platform to record alarm information.

4. When selecting type to be event, the record file is a normal record; when selecting the type of alarm, the record file type is alarm.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Alarm – Motion Detection

1. Enable on means this sensor turns on;

2. The sensitivity can be set L (low), M (medium), H (high), the higher the easier to detect environmental change;

3. Detection area: using two points of the diagonal to determine the detection area, select the first point, press ENTER on remote, and then use the up, down, left and right arrow keys on remote to select another point of the diagonal, press enter key again within selected area can cancel this area selecting. Note: Motion detection can generate an alarm based on any change of the environment (including brightness, colour, etc.). It is not recommended to use this alarm function in ordinary circumstances.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Alarm – Linkage

1. Select the output (output selectable output, output 1, output 2) in the corresponding column; after selecting the output, when an alarm is generated, the corresponding alarm output line will generate 12V high level to drive the work of other equipment.

2. It can also be chosen whether to record the Wlog, Wdata; on means recording, off means not recording.

5.5 Tools

1 When necessary, the device parameters can be reset to the default configuration. 2 Import configuration file from the USB storage device. 3 Inserting the USB storage device to the front USB port, the current configuration parameters of this device can be exported to the USB storage device;

4. Upgrade Log (logo). The user can modify the boot logo file (loading.jpg) and the upgrading logo (upgrading.jpg). Both logo images need to be 720 x 576 pixels in size, in jpg format and matching filename(s). Copy the logo image(s) as per the specifications above to a USB storage device, then

insert it into the front USB port and choose the upgrading logo function.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Tools - Format

Format the HDD or SD Card Select to format the hard disk, the mirror disk, SD card or the USB stick.

Note: the hard disk and the SD card must be formatted when installed the first time.

Tools – Log Search

Calendar dates with a green background means it has log, log query starts by selecting the date, start time, end time, log type: system log, alarm log. Such as on & off, video loss, parameter setting.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

5.6 Peripherals

Peripheral Settings PTZ Settings (pan tilt zoom)

1. Channel selection 1-4 or 1-8

2. Protocol: divided into PELCO-D and PELCO-P protocol

3. Baud rate: 1200/2400/4800/9600 four options, the user can modify baud rates according to different PTZ setting.

4. Data bit: Generally it is 8, where you can select from 1 to 8, but it is 8 by default.

5. Stop bit: Stop bit is generally “1”, you do not need to modify default. 6 Check: check bit is to select the check way. Generally it is set to “None”. 7 Address: the address code is input directly by the address corresponding to PTZ setting, they must be setting corresponding to, the default address code of most PTZ is 1; PTZ has adjustable address code DIP, and it is needed to set different address codes to identify when there are numbers of PTZ.

8. Wiring method: PTZ cathode connected to RS485-A, negative connected to RS485-B. When PTZ relevant parameters are set ready, the remote control can only be used to control PTZ after the channel connected to PTZ is selected, for example, PTZ is connected to Channel 2, then you can only control it by switching to 2-channel to maximize it on the monitor interface.

Peripherals – Wireless Setup

When the MDVR wants to use 3G network reporting platform, it needs network-related settings in this menu. 1 According to the communication configuration of the machine, insert the SIM card, supporting three: WCDMA (China Unicom) and EVDO (China Telecom) TD-SCDMA (China Mobile). SIM card slot is on the front panel, open the lock to open the protective cover, you can see the SIM interface, follow the instructions to insert the SIM card correctly. 2 Plug in the 3G antenna after SIM card inserting, ensuring that the system is able to receive good 3G signal.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

3 Edit the following information under the 3G Settings menu interface: A: Wireless set to open. B: Select the type of communication, press "ENTER" button to select the corresponding module (WCDMA / EVDO / TD-SCDMA is determined by the type of model, one model only support one mode.) C: The access point and the centre number is generally by default, which do not need to change; user name and password in some provinces are not by default, some can be empty which do not need to input anything, while most of them can just keep the default settings. If it is a foreign 3G, it would need the operators to provide access points and centre number to set, in some abroad places it is a must to enter username and password for a normal dial-up; when your host can not be reported, please make sure your 3G settings are correct (most of the foreign districts are with WCDMA equipment) D: Save it after completing all the settings. 4 After exiting all menus, press the INFO button on the remote control, it is able to see 3G communication, if signal is good, it will show dial-up is successful, the device can be reported to CMS Server platform with three points of the server IP address settings, port settings and device number settings.

Peripherals – Wifi Setup

The MDVR has external WiFi capabilities.

1.Select WIFI module to be external; 2 Select enable to be on;

3. Input the IP address of AP-WiFi, note: the device to determine whether the RJ45 interface and external module is connected by IP;

4. Input AP-WIFI's SSID, note: the server to determine whether to use the WIFI connection by this SSID.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

5.7 Search – Record Search

Calendar dates with a green background means it has a video file. Video search starts by selecting the date, start time, end time, record path: hard drive, mirror, SD card, record type: conventional recording, alarm recording, all recording, channels: all channels, 1-4, 18; After searching, select it and click remote play button for record playback,; pressing the number keys 1-8 on the remote control can switch to the single-channel fullscreen playback, supporting 2X/4X/8X /16X speed fast forward and rewind.

5.8 System Information

At the scene to monitor the status of the four screens, pressing the "INFO" button on the remote control can directly display system information, device status information includes the hardware and software version number, and the MCU version information, meanwhile display GPS module, WIFI module, 3G wireless module and SIM card information, the device status information is often used when checking the system status and fault judgment. When it needs 3G to report CMS Server platform, the 3G card signal and dial-up state are visually displayed here, and the success/failure status of connecting to the server center can be also displayed. System Info (page 2)

The next page of System Information can view the hard disk, the mirror disk, SD card: total capacity, used space, free space, state.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Appendix 1: Server platform interface

Appendix 2: Common problems and solutions

Q: No video output? A: Follow this checklist:

1.Check for an illuminated power on light on the MDVR device. If off, then check power to the unit.

2.Check the power supply status of display screen, as well as check whether the display video has been

switched to AV status.

3 Check the connecting status between the MDVR video output cable and display screen. 4 Check whether the lock status of the MDVR device LOCK, it must be locked before normal starting

up.

Q: The vehicle video input interface is different from the camera output interface? A: The car uses 4PIN type while camera uses BNC or aviation head type, if not matching, use a conversion adapter.

Q: After installing a SD card the MDVR device no longer video records? A: Follow this checklist:

1.Check whether the SD card has been formatted or not after installation, because an unformatted SD card cannot be used. Enter System Menu - System Tools - Device Format to format the newly installed SD card;

2. Check to see whether video channel is closed or not, whether set a timer recording or not, it will not record video when it is not within the video recording time period.

3.Check the SD card placement and look to see whether the SD light on front panel is on or not.

fleetminder Mobile DVR User Manual (Vers. 2014-04)

Q: The video file is missing or there is no video file within a certain period of time? A: Follow this checklist:

1. Determine the time period by analysing the final video file before missing and the first video file after recovery.

2. Confirm whether the host is not on during that period of time, such as when the driver halfway parking, loading and unloading goods while the host is not set by video delay.

Q: When camera’s PTZ (pan tilt zoom) cannot be controlled? A: Check whether PTZ protocols and baud rate are set correct, address codes are corresponding or not, whether have selected to maximize the video of the channel when control the PTZ, for example, when control the second channel, it must maximize the screen of the second channel image to control it.

GPS-related issues

Q: GPS module is installed, but no coordinate information? A: Follow this checklist:

1.Check for a good electric connection of the GPS module.

2.Make sure that the GPS antenna connection is good. Check whether the antenna is broken. It is recommended that the antenna be located in places with a strong signal. Note that some car glass shielding film can block GPS signals; 3 The GPS antenna will not pick up a satellite connection indoors.

Q: Deviation of GPS location on map? A: There may many reasons for the deviation, such as government restrictions, permissible error, GPS signal interruption, etc; the actual satellite map may have deviation for security reasons, general map can solve the problem by using GPS correction.

3G wireless module

Q: If I use the 3G wireless module for dial-up, what do I need to pay attention to? A: Follow this checklist:

1. Choose the built-in wireless module WCDMA or EVDO, corresponding module settings are not the same, the modules supported by different machines models are not the same, so please make sure whether your module and SIM is in correspondence. Do not use telecom SIM card on WCDMA machine;

2.Check whether the settings of Server IP and port are correct, whether 3G signal is strong enough for dialing, and then check whether the 3G dial-up is successful or not.

3. When dialing is unsuccessful, please check 3G antenna is in good contact or not, the dial up may fail because of weak signal, moreover, please check whether the SIM card has enough traffic, if no traffic, dial-up will be unsuccessful.

Q: When 3G has neither report nor video, what should be done first?

fleetminder Mobile DVR User Manual (Vers. 2014-04)

A: Press INFO key to enter the system information page, check whether the SIM card exists and view the signal strength as well as dial-up status, whether the antenna is in good contact, and then check the SIM to see whether it is out of traffic, the most basic judgment is to replace the SIM card. If the dial up failed with signal, then check whether the settings of center number and the port are correct. Moreover check whether the device number of the product is already occupied.

Q: 3G signal is intermittent, video is jammed? A: At present the signal coverage of WCDMA and EVDO is rather wide, however, there are some mountainous districts without signal coverage, and some suburban areas have weak signal due to the local network constraints, then it will be jammed during watching of video, or video cannot be watched at all, the greatest impact of this situation is from the local network; Moreover check whether the frame rate setting of sub-stream is too high, because the video may also occur such situation when the network is poor and frame rate setting is high.

Q: Why the vehicle and video cannot be seen on the Server client when the device has been started? A: At first make sure the central registration server is switched on and on the net, then check whether the host device number has been occupied to cause conflict, secondly check whether the settings of server-centric IP and port are correct; devices report to the center via the built-in 3G module or via WIFI. If via built-in 3G, please check whether selected the correct type of built-in 3G module, for example, WCDMA and EVDO module needs the support from corresponding SIM card, check whether the antenna is in good contact; If it still cannot report when above all are checked, enter into the system information page to view dial-up. If dial-up is not successful, look up whether the setting of data access point and center number is correct. If all ultimately fail, please collect as much information as possible to submit to the technical supporting staff for analysis, the more data provided, the easier and quicker it will be for technicians to solve the problem.

Q: The device is online, but why can I not see the video image? A: Please set lower sub-stream to transmit image, the blocked or slow transmission speed situation may occur when the sub-stream frame rate is set very high and be affected by network uploading limit; poor network signal or intermittent will seriously affect the video transmission.

Q: The device is properly reported on Server, but the videos cannot be seen after using for some time? A: Firstly check whether the MDVR displays dialing, if it keeps the dialing status, it may be because the credit (or the account) of the SIM card has run out, replace the SIM card to test; Secondly query whether the MDVR’s device number has been modified by the driver, the MDVR with the modified device number needs to be resubmitted to add vehicle information; thirdly, if it still does not work by changing the card, it will need to check whether the MDVR 3G module has failed.

fleetminder Mobile DVR User Manual (Vers. 2014-04)