Flaircomm Technologies BTAV101 User Manual

AV Adapter User Manual

Model：BlueTone™BTAV101

Declaration:
Without written permission from original manufacturer, reproduction, transfer, distribution or storage of part

or all of the contents in this document in any form is prohibited.
The company reserves rights to make any changes and improvements to the product described in this

document without prior notice.

Flaircomm Technologies Inc. 1
Address：No 211 North Urumchi Road, Suite 616, Shanghai, PRC, 200040
Telephone：[phone] Fax：[phone]

www.flaircomm.com

.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the user's
authority to operate the equipment.

RF exposure warning ·

The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.
The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

Warning：Users should not make changes or modify the device in any way. Changes or modifications without
expressly approved by the party responsible for compliance could void the user’s authority to operate the

device.

Flaircomm Technologies Inc. 2
Address：No 211 North Urumchi Road, Suite 616, Shanghai, PRC, 200040
Telephone：[phone] Fax：[phone]

www.flaircomm.com

.