FitLinxx WM Users Manual

PROPRIETARY

y

FitSense Technolog

RF Module
User Guide

Doc Number: 930-00004-01

Proprietary Information

Revision History

DATE REVISION DESCRIPTION AUTHOR
8/04/2007 01 Initial release Steven Oliver
8/13/2007 02 FCC modifications John MacLean

Approvals

The information contained in this document is the sole property of FitSense Technology. Any
reproduction in part or whole without the written permission of FitSense Tech nology is
prohibited.

RF MODULE

DOC #: 930-00004-01 REVISION: 02

1 User Guide

1.1 Introduction:

The RF Module (RFM) enables any PC base d product with a USB port to provide wire less
communication between FitSen se Sensors.

Installation:

1.

Installaton and Serviceing is only to be performed by a qualified

technician trained by FitLinxx in the installation of this module.

1. Locate the USB port on the Equipment.

2. Install the RF Module USB cable in to the USB port.

3. If USB connection is made internally to the PC the cables mu st be stripped back a nd soldered
onto the appropriate USB signal pins. This can o nly be performed by a FitSense qualif ied
technician!

© 2006 FITSENSE TECHNOLOGY CONFIDENTIAL PAGE 2 OF 3