FitLinxx CB Users Manual

PROPRIETARY

FitSense Technology

CBM
User Guide

Doc Number: 930-00003-01

Proprietary Information

Revision History

DATE REVISION DESCRIPTION AUTHOR
4/04/2007 01 Initial release Steven Oliver
4/23/2007 02 Saftey approval updates and FCC modifications John MacLean

Approvals

The information contained in this document is the sole property of FitSense Technology. Any
reproduction in part or whole without the written permission of FitSense Technology is
prohibited.

CSAFE BODYLAN MODULE DOC #: 930-00003-01 REVISION: 01

1 User Guide

1.1 Introduction:

The CSAFE BodyLan Module (CBM) provides wireless communication between a CSAFE equipped
fitness equipment and the Local Acess Point or Remote Acess Point. Included with a CBM is a 12 inch
flat data cable.

1. Installation:

Installaton and Serviceing is only to be performed by a qualified
technician trained by FitLinxx in the installation of this module.

1. Locate the CSAFE port on the fitness equipment console.

2. The CBM needs to be placed near the CSAFE port and just below the top of the equipments
console

3. With a cleaning solvent clean the area on the console where the CBM is going to be placed.

4. On the back of the CBM, peel off the protective cover of the Velcro adhesive and attach it to the
console.

5. Insert the small connector end of the data cable into the CBM and the larger end connector into
the CSAFE port on the console.

© 2006 FITSENSE TECHNOLOGY CONFIDENTIAL PAGE 2 OF 3