FitAir Eden Aroma Diffuser, Car CO5, Genie F02B, Halo T02D, Zana B01A Instructions For Use Manual

...
The FitAir® Family
Instructions for Use
HealtH & Well-BreatHing
WELCOME
Thank you for your FitAir® purchase – you’ve taken the rst step towards cleaner air for you and your loved ones. FitAir® puriers are a safe and effective alternative to air fresheners, plug-ins and scented candles which only mask bad odours with unnecessary chemicals.
Designed with health and well-breathing in mind, FitAir
attacks the source of the problem by destroying bacteria and pollutants that cause your air to be stagnant and unpleasant – leaving behind unscented freshness.
Please read through the usage and service instructions and keep this manual for future reference.
CONTENTS
Introduction 3 The Science Behind FitAir Is Your Air Fit to Breathe? 5 Safety Information 7 Maintenance and Cleaning 8 Drivers and Air Pollution 9
®
FitAir
Car 10
®
FitAir
Eden 12
®
FitAir
Genie 14
®
FitAir
Halo 16
®
FitAir
Zana 18
®
FitAir
Zeus 20
One Year Limited Warranty 23
®
4
2
HealtH & Well-BreatHing
FitAir® is an innovative range of devices which utilise ionic technology to improve the quality of the air you breathe.
Air puriers are perfect for:
> Home
> Ofce
> Car and travel
> Schools and universities
Air puriers don’t rely on harsh chemicals to cover-up odours; instead they release negatively charged ions which safely remove the odour-causing toxins you breathe every day.
Imagine the invigorating feeling you get when you’re high on a mountain, at the beach, or in a forest. These are the places that are naturally rich in negatively charged ions, which can improve your
mood, reduce stress and help with breathing.
FitAir
’s technology combats the source of allergies and asthma, neutralising odour and pollutants to transform your stale indoor space into a fresh and healthy environment.
> Assisted living and hospitals
> Conference rooms
> Restaurants
> Studios
...and all other indoor living spaces!
3
HealtH & Well-BreatHing
THE SCIENCE BEHIND FITAIR
IS YOUR AIR FIT TO BREATHE?
Some airborne particles get caught in our nose or throat, where we cough or swallow to remove them, however 99% of the particles suspended in air are ultra-ne (one micron or smaller). These particles can remain airborne for very long periods of time, unlike larger particles that tend to settle on surfaces as dust.
Ultra-fine particles are ‘respirable’, meaning they are small enough to be inhaled, where they can remain embedded in the lungs or be absorbed into the blood stream. We inhale and exhale approximately 20,000 times a day. By failing to purify our air we are breathing in this chemical stew of contaminants and pollutants.
© FitAir
Lung Damage
Headaches
Dizziness
Coughing
Shortness of
Breath
Sore Throat
Poisons in
Blood
Stream
Eye Irritation
Nasal Discharge
Nausea and Vomitin
g
Airway Constriction
Chest Pains
COMMON SYMPTOMS OF EXPOSURE TO AIR POLLUTANTS
Have you ever noticed how crisp the atmosphere is after a thunderstorm?
FitAir®’s technology cleans and regulates your air in the same way; our puriers release negative ions that destroy airborne pollutants and leave behind a micro-climate rich in active oxygen molecules.
> Inside your FitAir
form anions.
> These are attracted to particles like volatile organic compounds
(VOCs), biological air pollutants and noxious gases.
> The anions attack and eliminate contaminants they
come in contact with.
> Only pure oxygen remains after your air has been cleansed
and sanitised.
FitAir
99.99% of airborne germs after just half an hour of usage.
Once neutralised, any remaining particles (no matter how small) are attracted to each other due to their electric charge. As they cluster together they become heavy enough to drop out of your breathable air space. When you rst start using FitAir notice an increase in dust gathering on your indoor surfaces; this is a sign your unit is working. After regular usage you’ll nd that dusting and other cleaning is greatly reduced - as there are no other particles in the air left to settle!
4
, oxygen from the air is negatively charged to
’s bactericidal technology is so effective that is sterilises
®
you may
HealtH & Well-BreatHing
IS YOUR AIR FIT TO BREATHE?
IS YOUR AIR FIT TO BREATHE?
Some airborne particles get caught in our nose or throat, where we cough or swallow to remove them, however 99% of the particles suspended in air are ultra-ne (one micron or smaller). These particles can remain airborne for very long periods of time, unlike larger particles that tend to settle on surfaces as dust.
Ultra-fine particles are ‘respirable’, meaning they are small enough to be inhaled, where they can remain embedded in the lungs or be absorbed into the blood stream. We inhale and exhale approximately 20,000 times a day. By failing to purify our air we are breathing in this chemical stew of contaminants and pollutants.
Blood
g
COMMON SYMPTOMS OF EXPOSURE TO AIR POLLUTANTS
Airborne particles can get caught in our nose or throat, and we cough or swallow to remove them. 99% of the particles suspended
in air are ultra-ne (one micron or smaller). These particles can
remain airborne for very long periods of time. They are ‘respirable’, meaning they are small enough to be inhaled, they can embed in the lungs or be absorbed into the blood stream. We inhale and exhale approximately 20,000 times a day. By failing to purify our air we are breathing in this chemical stew of contaminants and pollutants.
Common symptoms of exposure to air pollutants:
Headaches
Dizziness
Coughing
Shortness of
Sore Throat
Poisons in
Breath
Stream
Lung Damage
Eye Irritation
Nasal Discharge
Nausea and Vomitin
Airway Constriction
Chest Pains
© FitAir
®
5
HealtH & Well-BreatHing
The symptoms you experience from poor indoor air quality are some-times referred to as Sick Building Syndrome. That’s because most of the pollutants that cause ill health, asthma and allergic reactions tend to be by-products of air-tight and poorly ventilated buildings. These include:
Biological Air Pollutants
> Mould spores from excess
humidity and poor ventilation.
> Pet dander (skin cells) from
animals that cause allergies.
> Dust mites that thrive on skin
cells and live in bedding and furnishings.
> Pollen from trees and plants
carried inside on shoes, pets or through open windows.
> Viruses and bacteria which
are especially common in public buildings.
Unfortunately many people deal with poor indoor air quality by using aerosols, plug-ins or scented candles. However, the pleasant aromas associated with such products only overpower the existing smells. In other words, they re-odourise, but don’t de-odourise. Sprays and fresheners coat airborne pollutants in even more chemicals which we then inhale. 86% of air fresheners tested by the NRDC (Natural Resources Defense Council) contained dangerous phthalates; even those marketed as ‘all-natural’ or ‘unscented’. These can damage the liver, kidneys, lungs, and reproductive system.
provides ‘health and well-breathing’, by safely and
FitAir effectively removing the source of odour problems – not covering them up.
Volatile Organic Compounds (VOCs)
> Household products and
solvents like cosmetic aerosols, room fresheners, cleaning agents, paints, glues and formaldehyde.
> Electronic appliances like
mobile phones, printers, computers and TV’s.
> Building components and
furnishings like insulation, ooring, plywood and foam bedding.
6
HealtH & Well-BreatHing
SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to reduce the risk of re, electric shock and injury, including the following:
> Read all instructions before operating your unit. > Unpack the unit from its packaging and remove protective
materials, inspect the unit for any visible signs of damage. If
damage is evident, repack and contact your local distributor.
> Place the unit where it is not easily knocked over. > If mains operated, always unplug from the wall socket when not in
use. To disconnect the unit, rst turn it off on the unit, then grip the
plug and pull it from the wall outlet. Never pull by the cable. Keep
the cable away from heat sources.
> Do not run power cables under carpets or cover with throw rugs.
Arrange the cable so that it is visible and will not be tripped over.
> Avoid using an extension cord. Do not overload sockets. > Check the cable is securely attached to the appliance and
that cables, plugs and battery terminals are not cut, nicked or
damaged in any way.
> Check regularly for signs of overheating such as discoloured
casing, cable, plug or terminal.
> Do not use if product malfunctions, is dropped, or damaged in
any manner.
> Never use your unit unless it is fully assembled. > Do not use your unit where combustible gases or vapours are
present.
> The unit must be in its upright position during use. > Do not allow foreign objects to enter ventilation or exhaust
openings as this may cause electric shock or damage to the unit.
> Do not block air outlets or intakes. > Do not sit, stand or place heavy objects on the unit. > Disconnect power supply before servicing. > Do not blow air directly into your unit.
7
HealtH & Well-BreatHing
MAINTENANCE AND CLEANING
ALWAYS ensure the appliance is UNPLUGGED (where mains operated) and SWITCHED OFF before cleaning, removing lters, changing batteries or attempting to store the unit.
> Never plug or unplug the unit with wet hands.
> Do not allow water to get into intake and outtake grills.
> No part of the unit should be placed in a dishwasher.
> Never use gasoline, polish, or any other chemical solution to
clean your unit.
Storing your unit
Store in a dry location. Do not place any heavy items on top of appliance during storage as this may result in damage.
If your unit is mains supplied: Store the cord in a clean, dry location away from metal objects. Always check the plug before use to assure metal items have not become attached.
If your unit is battery operated: Always remove batteries when storing or leaving the unit idle for a long time.
8
HealtH & Well-BreatHing
DRIVERS ARE AT THE HIGHEST RISK
FROM AIR POLLUTION
We all know the dangers of air pollution and what it’s doing to our planet. But did you know the effect it could be having on your health? Research found that every year in the UK there are around 29,000 deaths that can be associated to air pollution.
The number of cars on the road is increasing all the time which is leading to more polluted roads. A study found that car drivers and passengers are exposed to as much as 15 times more pollution than pedestrians and cyclists in the same areas. The most polluted area of a street is the middle of the carriage way, where the drivers are.
It would seem logical to believe that by keeping your windows shut would stop these dangerous pollutants from getting into the car but that’s not true. The air that comes through the car’s air conditioning is sucked in from the outside and most cars’ air lters cannot trap these bad particles as they are too small.
As well as making the air safer to breathe, the FitAir® Car Air Purier removes the particles that cause bad smells, leaving your car smelling as fresh as when it was new.
Using the FitAir® for just 30 minutes can clean the air in your car of up to 99% of airborne pollutants.
After the air in your car has been cleaned of harmful pollutants, all that remains is a microclimate full of active oxygen molecules! Because FitAir® relies on nature’s own methods of purication, there’s no lingering articial scents, just the crisp smell of fresh, breatheable air.
9
HealtH & Well-BreatHing
FITAIR® CAR
Our FitAir® Car Air Purier protects those most at risk from air pollution – drivers. FitAir® Car plugs straight into your cars cigarette lighter and ionizes the air, giving you instantly cleaner and safer air. Working silently without any type of chemical.
®
FitAir
Car can target and eliminate bacteria,
viruses, fungi and pollen micro particles less than
0.5 microns (200x thinner than a human hair)!
®
FitAir
Car’s negative ionisation technology has been specically designed to safely and effectively target harmful bacteria in your environment, without compromising your health or just simply masking the problem.
®
FitAir
Car eliminates 99.99% of airborne germs and bacteria, and it can do this in as little as 30 minutes.
Model Name Car Model Number CO5 Colour White Voltage DC12 Battery Car Lighter Socket Power Consumption N/A Dimensions 11cm x 4cm x 4cm Negative Ions Output 5,000,000m Ozone Output 20mg per hour Effective Range Any large car or van Weight 65g Certication CE, RoHs
3
10
HealtH & Well-BreatHing
How to Use FitAir® Car:
Just plug your FitAir® Car Air Purier into your car’s cigarette lighter.
Cleaning the Unit
Once unplugged, the exterior of the unit may be cleaned by wiping with a lightly damp cloth.
We recommend you clean your unit about once a month. There is no need to clean the internal lter
9
9
.
s
9
e
9
s
i
l
i
r
e
t
S
%
o
f
9 9.9 9 %
A
i
r
b
o
u
r
n
e
P
s
t
n
a
t
u
l
l
o
11
HealtH & Well-BreatHing
FITAIR® EDEN
Creating your own at-home sanctuary has never been easier. The FitAir® Eden aromatherapy oil diffuser and nebuliser can help you to transform any environment into a tranquil paradise.
With its compact shape and portable nature, you are free to create a nirvana of your own wherever you travel; at work, in a hotel, Eden will help you to escape into pure bliss.
The innocent size of the Eden does not, in any way, impact on its functionality. Providing up to 50 hours of scent with each charge, and a range to suit any size of room, not sparing a moment to embrace relaxation would be a sin!
Model Name Eden Model Number Aroma Diffuser Colour White Voltage DC5V Battery USB charging Power Consumption 0.6w Dimensions 85 x 85 x 88mm Negative Ions Output 0 Ozone Output 0 Effective Range 5 - 70m Weight 220g Certication CE
2
12
HealtH & Well-BreatHing
How to Use Eden:
1. Charge your FitAir® via
the USB charging cable. This takes around 2 hours, a red light will ash when charging, which will turn to green when fully charged.
2. Unscrew the base cover
and ll the included bottle with your favourite choice
®
of FitAir
3. Screw the bottle into the top
part of your FitAir Nebuliser, then replace the base cover.
4. Turn the side switch to ‘On’,
the indicator light on the top will light up.
5. Press ‘Mode’ to switch
between low, medium and high diffusion strength.
6. Press the clock button
to set the timer for 1, 2 or 4 hours, or to run continuously.
Aromatherapy oil.
Eden
Where to Place Eden:
> Place the aroma diffuser
and nebuliser in a well-ventilated area.
> Keep the unit away from
electronic devices to avoid interference.
> Keep both sides of the unit
away from the wall.
> Do not place the unit in
close contact with curtains and furniture.
Using FitAir® Aromatherapy Oils
> Hook the clasp of the
aroma box on the back of the unit and gently pull.
> Drip 1-2 droplets of
aromatherapy oil into the aroma sponge of the box.
> Gently push the aroma box
back into place.
Cleaning the Unit
> Once unplugged, the
exterior of the unit may be cleaned by wiping with a lightly damp cloth.
> We recommend you
clean your unit about once a month.
13
HealtH & Well-BreatHing
FITAIR® GENIE
For those small spaces where smells can become concentrated we’ve magically summoned Genie! This space-saving unit is compact and great for deodorising and freshening storage boxes, cabinets, cupboards, wardrobes and drawers. An excellent alternative to carcinogenic mothballs, Genie is able to kill bacteria and deter the growth of mildew, making it perfect for that smelly shoe cupboard!
Featuring a useful hanger, Genie can be placed inside your suit carrier or gym bag to keep clothes smelling fresh wherever you go. It can even help neutralise the harmful chemicals left on your clothes after dry cleaning.
A built-in micro CPU intelligently controls Genie’s operation cycle so you don’t have to worry about checking up on it; the LED ring will let you know that Genie is working!
Model Name Genie Model Number F02B Colour White Voltage DC 4.5V Battery 3 x AAA Power Consumption < 0.5W Dimensions 9cm x 9cm x 3cm Negative Ions Output 3 million/cm Ozone Output 20mg/h Effective Range 250L Weight 160g Certication CE, RoHS, ISO9001:2008
3
14
HealtH & Well-BreatHing
How to Use Genie:
1. Open the battery cover on the back of the unit and install 3 x AAA batteries (supplied).
2. Press the On/Off button at the bottom of the unit to start running – the blue-lit LED ring will light up to let you know it is working.
3. The steady blue ring means the unit will work continuously for 30 minutes. After this it will go into an automatic energy-saving cycle of 2 minute sterilisation and deodorisation every hour.
4. When the unit is in the energy-saving mode, the LED indicator will intermittently ash every 10 seconds so you know it is still switched on and the built-in microprocessor is timing when it comes on.
5. Press the On/Off button again to turn off when not in use, or during storage.
6. Please change the batteries when the low-voltage indicator ashes red.
Where to Place Genie:
> Genie is designed to be
hung inside cupboards and wardrobes.
> Keep both sides of the unit
away from walls.
> Do not place the unit in
close contact with curtains and furniture.
Cleaning your Air Purier
> You can nd the Negative
Ion outlet grill at the top of the unit - this should be cleaned monthly with a dry cotton bud.
> Only wipe around the front
edges of the outlet.
> The exterior of the unit may
be cleaned by wiping with a lightly damp cloth.
> We recommend you clean
your air purier about once a month.
15
HealtH & Well-BreatHing
FITAIR® HALO
Halo has a sleek, pearl-white design with a rounded bottom. Featuring elegant soft-touch buttons, its three user settings with ambient LED indicator keeps you in charge of the air you breathe.
Great for the ofce and home, Halo keeps unpleasant odours at bay and can increase your productivity and mood thanks to its constant release of negatively charged ions.
This unit is environmentally friendly with low wattage and a built­in energy saving micro-processor that controls cycles for your convenience. Extremely quiet with combination carbon and HEPA lters, Halo is perfect for ltering out even the smallest of particles.
Model Name Halo Model Number T02D Colour White Voltage DC12V / AC100-240V Battery Mains Power Consumption < 10W Dimensions 18.5cm x 15cm x 15cm Negative Ions Output 16 million/cm Ozone Output 200mg/h (30 mins auto stop) Effective Range 60-80mg m Weight 1080g Certication CE, RoHS, ISO9001:2008
3
2
16
HealtH & Well-BreatHing
How to Use Halo:
1. Plug the adaptor into a wall socket and connect the power­cable to the air purier (the endpoint is located under the base).
2. Press the On/Off button at the top of the unit to start running – re-press it to stop.
3. When the air purier is turned on, a blue light indicates Negative Ions mode. Negative Ions help reduce smoke and dust particles in the air.
4. Press the Ozone button below the power button to enable Ozone mode. The air purier will change its LED colour to red and produce Negative Ions and Ozone for 30 minutes after which time it will automatically return to the Negative Ion mode. Ozone rapidly destroys airborne bacteria and cleans the air more efciently than ionisation on its own.
5. Press the Ozone Button one more time to enable Cycle mode. In Cycle mode, the air purier will produce Ozone for 5 minutes, then switch to Negative Ion mode for 25 minutes and back again intermittently without further adjustment. This mode is indicated by a ashing red colour LED.
Where to Place Halo:
> Place the air purier in a
well-ventilated area.
> Keep the unit away from
electronic devices to avoid interference.
> Keep both sides of the
unit away from the wall.
> Do not place the unit in
close contact with curtains and furniture.
Cleaning the Filter
> Remove the cover at the
base of the unit and pull out of the unit gently.
> Clean lter with a small,
dry brush and replace.
> We recommend you
clean your lter about once a month.
Cleaning the Air Purier
> Once unplugged, the
exterior of the unit may be cleaned by wiping with a lightly damp cloth. The intake grill and outlet grill can be cleaned of dust with a small, soft brush.
> We recommend you
clean your air purier about once a month.
17
HealtH & Well-BreatHing
FITAIR® ZANA
In mythology every mountain is said to have its own Zana who acts as a guardian angel for people on their travels. FitAir®’s Zana provides portable ionisation to protect you from inhaling polluted air, wherever you go.
Brilliant for use on public transport or visits to hospitals, Zana’s bactericidal technology means you don’t have to worry about catching a cold, while its carbon ltration screens reduce smoke particles and exhaust fumes.
Zana includes a neck strap and pocket clip, as well as a convenient pop-out stand for desks and tables. With an efcient USB port, you can charge this unique unit from your PC or laptop, whenever you need it most!
Turn on Zana and get protected by your own personal guardian (or should we say guard-ION) angel!
Model Name Zana Model Number B01A Colour White Voltage DC 3.7 V Battery Rechargeable - Non-removeable (USB) Power Consumption < 0.2W Dimensions 8cm x 6cm x 3cm Negative Ions Output 10 million/cm Ozone Output 20mg/h Effective Range 30m
2
Weight 85g Certication CE, RoHS, ISO9001:2008
3
18
HealtH & Well-BreatHing
How to Use Zana:
1. Connect the Mini-USB end of power cable to the air purier (the endpoint is located on the side) and plug the USB connector into a plug adaptor or PC USB port to charge. The red LED indicator is on when charging (max 2-3 hours).
2. Press the On/Off switch on the right side of the unit to turn on, when the red LED indicator is off and the unit is fully charged.
3. The blue LED indicator will turn on and you should feel a light breeze coming from the top.
4. Pull the lanyard (supplied) through the loop, adjust length and place around neck to wear, or x the stainless steel clip onto your pocket or collar.
5. Pull out stainless steel bracket to set up on desk or table.
6. The air purier can work whilst charging.
7. Press the On/Off switch again to turn off.
8. Please recharge after use (max 12 hours )
Where to Place Zana:
> Place the air purier in a
well-ventilated area.
> Keep the unit away from
electronic devices to avoid interference.
> Keep both sides of the
unit away from the wall.
Cleaning the Air Purier
> You can nd the Negative
Ion outlet grill at the top of the unit - this should be cleaned monthly with a dry cotton bud.
> Only wipe around the
front edges of the outlet.
> The exterior of the unit
may be cleaned by wiping with a lightly damp cloth.
> We recommend you
clean your air purier about once a month.
19
HealtH & Well-BreatHing
FITAIR® ZEUS
Zeus is an almighty air purier, certainly one of the greatest in the family. With a built-in ionizer, 3 forms of lter, and Ultraviolet sterilisation, Zeus will powerfully purify any damaging substances that cross its path, this includes smoke, foul smells, and harmful gases.
The prodigious Zeus purier can sterilise over 90% of airborne germs within a 27m² radius.
This mighty unit is equipped with 7 stages of purication, including HEPA lter, carbon adsorption, UV light and an ionizer.
There’s no doubt that the power of the Zeus purier will entice any user.
Model Name Zeus Model Number KJ225 - A200 Colour White Voltage AC 220V / 50Hz Battery Mains Power Consumption 45W Dimensions 348mm x 190mm x 556mm Negative Ions Output 10 million pcs/cm Ozone Output n/a Effective Range 27m
2
Weight 6.2kg Certication CE, RoHS, ISO9001, ISO14001
3
20
HealtH & Well-BreatHing
How to Use Zeus:
1. Remove the front panel of the unit and remove the lters from their packaging.
2. Insert Layer 3 Activated Carbon Filter into the unit.
3. Insert Layer 2 HEPA Filter into the unit.
4. Insert Layer 1 Elementary Filter into the unit.
5. Replace the front panel and connect Zeus to power supply.
6. Press the On/Off button to turn your unit on.
> Press AUTO to switch Zeus to
auto mode.
> Press SPEED to change the air
ow speed (choose between 1, 2 or 3).
> Press SLEEP to enter sleep mode.
The display lamp will turn off and air ow decreases. Press AUTO to turn this mode off.
> Press TIMER to set your Zeus
to power off at a chosen time (choose between 1/2/4/8 hours).
> Press FUNCTION to control the
ionizer and UV lamp function of your Zeus.
Where to Place Zeus:
> Place the air purier in
a well-ventilated area.
> Keep the unit away
from electronic devices to avoid interference.
> Keep the unit away
from heat and water sources.
When to Replace the Filter:
> The RESET button
will ash when the lter service life has ended and requires replacement.
> When lters have been
replaced, press SLEEP for 5 seconds to renew the program.
21
HealtH & Well-BreatHing
Aromatherapy O ils
6 unique scents to help you set the perfect mood in your home
Buy from www.stressnomore.co.uk
22
HealtH & Well-BreatHing
ONE YEAR LIMITED WARRANTY
You should rst read all instructions before attempting to use these products.
A. This 1 year limited warranty applies to repair or replacement of
your product, found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. The manufacturer is not liable for incidental or consequential damages of any nature. Any implied warranty of merchantability or tness for a particular purpose on this product is limited to the duration of this warranty. This warranty applies only to the original purchaser of this product from the original date of purchase. This does not affect your statutory rights.
B. At its option, the manufacturer will repair or replace this product if
it is found to be defective in material or workmanship. Defective products should be returned to the place of purchase in accordance with store policy. Thereafter, while within the warranty period defective products may be returned to the manufacturer.
C. This warranty does not cover the pre-lter or the HEPA lter except
for material or workmanship defects. This warranty does not cover damage to outer case, accessories or external parts.
D. This warranty does not cover damage resulting from any unauthorised
attempts to repair or from any use not in accordance with the instruction manual. This warranty does not cover damages that attribute to self-dismantling and assembling, unauthorised operation not found in the instruction, random change of power source or voltage, articial causes or natural disaster.
E. In case of returns to the manufacturer, all transportation costs are the
responsibility of the purchaser. This includes costs for the authorised service provider to travel to the product location or transportation of the product to the authorized service provider location and back to the customer.
23
Customer Service Helpline: +44 (0) 1482 496 931 Monday - Friday 9am - 5pm
E: sales@stressnomore.co.uk
W: www.stressnomore.com
FitAir
Savantini Limited Savantini House, Foster Street, Hull HU8 8BT
T: +44 (0) 1482 496 931
FitAir
Disposal:
Use our WEEE Recycling Service
FitAir
units and accessories should be disposed of according to electrical recycling guidelines, to nd your nearest recycler see www.recyclenow.com
If you are purchasing a FitAir
unit as a replacement please return the faulty one to us here and we will dispose of it for you following WEEE guidelines.
Copyright © 2019 Savantini Ltd – All Rights Reserved.
Registered Company 07383612- VAT Number GB 113 1731 62
HEALTH & WELL-BREATHING
IFU001_0819
Loading...