Fisher-Price Y8601, Y8602 Instruction Sheet

TMH

1250mAh

BATTERY CHARGING/CARE

CAUTION: Use only the charger supplied

with this toy. Do not use any other charging source.

Use only HOT WHEELS NiMH battery packs. Other batteries may leak or rupture, causing personal injury and damage.

1. Plug the battery charger into standard wall outlet.

2. Hold the battery pack fully open, with the metal contacts at the top, as shown. The labels marked 1 and 2 in the upper left-hand corner should be facing you. Now slide the battery pack securely into the charger.

3. To disconnect, push the red button on the side of the charger. Hold the red button down while you slide out the battery pack.

4. After charging, the battery pack may feel warm. This is normal for fully charged batteries.

5. New battery packs must be charged for 5 1/2 hours the first two times charged. After that, subsequent charges will require 4 hours. Charging the battery pack for more than 4 hours will not give you a longer running time. 4 hours is all that is required for a fully charged battery pack.

6. Unlike NiCd (Nickel-Cadmium) rechargeable batteries, your TMH may be recharged at any time irrespective of the level of charge remaining in the battery. You do not have to wait until the battery pack is fully discharged to recharge it.

7. After use, the battery pack will be hot! Wait at least 20 minutes until the battery pack cools down before recharging. Recharging a hot battery will greatly reduce the number of times your battery pack can be recharged.

R/C TMH® FlexPak®

FlexPak® battery pack

RECHARGEABLE BATTERY INFORMATION:

• DO NOT RECHARGE BATTERY PACK IF

IT IS HOT. ALLOW IT TO COOL BEFORE RECHARGING.

• DO NOT RECHARGE A BATTERY PACK THAT

SHOWS LEAKAGE OR CORROSION.

• DO NOT DISASSEMBLE THE BATTERY

PACK. THE BATTERY PACK IS A SEALED RECHARGEABLE NICKEL-METAL HYDRIDE BATTERY PACK.

• EXERCISE CAUTION IN HANDLING A HOT

BATTERY PACK.

• IF BATTERY PACK AND/OR CHARGER ARE WET,

THOROUGHLY DRY BEFORE CHARGING.

• DO NOT RECHARGE NON-RECHARGEABLE

BATTERIES.

• DO NOT DISPOSE OF THE BATTERY PACK IN A FIRE.

Note to Adults:

• Recharge battery pack only under adult

supervision.

• Periodically examine this product for damage to

the plug, housing, or other parts that may result in the risk of fire, electric shock or injury. If the product is damaged, do not use it .

• The transformer is not a toy.

• This battery charger is intended to be correctly

oriented in a vertical or floor mount position

BATTERY DISPOSAL

Unlike NiCd (Nickel-Cadmium) rechargeable batteries, your TMH requires no special procedures or precautions for disposal. However, as with all products, you should dispose of your battery pack in an environmentally responsible and considerate

manner.

FlexPak® NiMH battery pack

Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities.

Questions or problems with your product? DON’T RETURN IT TO THE STORE! Just call us for help.

U.S. consumers may also register their products at this number.

©2012 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations 1-888557-8926. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:03-78803817, Fax:03-78803867. service. mattel.com

™

CAUTION – ELECTRICALLY OPERATED PRODUCT:

NOT RECOMMENDED FOR CHILDREN UNDER 8 YEARS OF AGE. AS WITH ALL ELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USE TO PREVENT ELECTRIC SHOCK. INPUT: 120VAC 60Hz 0.11A. OUTPUT: 8.5VDC 370mA 3.2VA

I. CONTENTS/ FEATURES

Vehicle

Battery door

ON/OFF switch

Twin PowerScrews

SMART CIRCUITRY

Your new vehicle is equipped with advanced “Smart Circuitry” designed to protect its electronic components under extreme operating conditions. If your vehicle stalls or gets stuck during use, it will automatically power down. Simply release the transmitter controls for a few seconds, then press the left control to resume normal operation.

NOTE: When your vehicle powers up again, you may notice some movement of the vehicle body and the PowerScrews. This may also happen if the vehicle is switched off with the PowerScrews angled, and then turned back on. This is completely normal: it’s an automatic system designed to return the vehicle to normal driving position. Once the movement has stopped, you may simply resume normal operation.

Transmitter

Driving controls

Battery Door

Antenna

Y8601/Y8602-0920

Keep these instructions for future reference as they contain important information. IMPORTANT: Please read all “Consumer Information” before operating your vehicle.

CAUTION:

away from moving parts.

To prevent entanglement, keep all hair

1 2

+ 2 hidden pages