Fisher-Price Y3610 Instruction Sheet

Y3610, BMM13

Scan the QR code below

to download the app

Scan the QR code below

to download the app

Download Imaginext™ Apptivity™ Fortress app. Scan QR code below

or go to App StoreSM.

Open playset case. Plug case audio pin into device

headphone jack.

Turn playset and device

power ON. Close case.

Scan the QR code below

to download the app

Turn OFF Multitasking Gestures (located in

device Settings).

Launch app.

OFF

Consumer Information

• Please keep this instruction sheet for future reference, as it contains important information.

• Requires three AA (LR6) alkaline batteries (not included) for operation.

• Adult assembly is required. Tool required for battery installation: Phillips screwdriver (not included).

• This product is compatible with first, second and third generation iPad display. Device not included.

• The Augmented Reality (AR) features (using the device’s camera) of this app only work with iPad® devices that have a camera.

• Only use this product with your iPad® device properly inserted and locked in the case. Remove any other cases from the device before inserting it in the case.

• Periodically check this product and your device for damage or cracks. Do not use if either is damaged or broken. Follow your device’s instructions for use and care.

• Wipe this product with a clean, damp cloth. Do not immerse. Do not use alcohol or ammonia based cleaners on the screen protector.

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

• Insert batteries as indicated inside the battery compartment.

• Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or equivalent type, as recommended.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the product before charging.

• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

, and the new iPad® with Retina

Battery Installation

1,5V x 3

AA (LR6)

For longer life, use alkaline batteries.

• Locate the battery compartment door on the bottom of the playset.

• Loosen the screw in the battery compartment door with a Phillips screwdriver and remove the door.

• Insert three AA (LR6) alkaline batteries.

• Replace the battery compartment door and tighten the screw. Do not over-tighten.

• If this toy begins to operate erratically, you may need to reset the electronics. Slide the power switch OFF and back ON. If resetting does not help, it’s time for an adult to change the batteries.

Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities.

One-Time Assembly

• Fit each base into the slots on the back of the playset and push to “snap” in place.

Hint: Each base is designed to fit one way. If it does not seem to fit, try the other base.

Setup

Lower Case

• Turn the dial to the unlock position. Lower the case.

Open Case

• While pressing the buttons on each side of the case, lift the screen protector.

Setup

Headphone Jack

Insert Device

• Remove any other case from the device before inserting it in this toy.

• Turn device power ON.

• Insert the device with the headphone jack next to the audio pin inside the case.

Audio Pin

+ 14 hidden pages