Fisher-Price X3844 User Manual
X3844
X3844
IMPORTANT! KEEP FOR FUTURE REFERENCE.
www.fi sher-price.co.uk
Consumer Information
WARNING
To prevent serious injury or death:
• Fall Hazard - Never use on any elevated
surface, since child’s movement may cause
product to slide or tip over. Use only on
a floor.
• Suffocation Hazard - Never use on a soft
surface (bed, sofa, cushion) since product
can tip over and cause suffocation in
soft surfaces.
• Never use as a carrier or lift while child is
seated. Never use toy bar to carry product.
• Always use the restraint system.
• This product is not intended to replace a cot
or bed for prolonged periods of sleep.
• Never leave child unattended.
• Do not use product once child can sit unaided.
CAUTION
Care
• The pad and head support are machine washable. Wash them
separately in cold water on the gentle cycle. Do not use bleach.
Tumble dry separately on low heat and remove promptly.
• The frame, toy bar and toys may be wiped clean using a mild
cleaning solution and damp cloth. Do not immerse the toy bar.
Do not use bleach. Do not use harsh or abrasive cleaners.
Rinse clean with water to remove residue.
C
B
A
To remove the pad:
• Pull to remove the pad from around the retainers and the soothing
unit A.
• Remove the bottom pocket of the pad from the footrest B.
• Lift to remove the pad C.
• To replace the pad, refer to Assembly steps 7 - 9.
A
This package contains small parts in an
unassembled state. Adult assembly is required.
IMPORTANT! Please keep this instruction sheet for future reference,
as it contains important information.
• Please read these instructions before assembly and use of
this product.
• Adult assembly is required. Tool needed for assembly: Phillips
Screwdriver (not included).
• Requires one "D" (LR20) alkaline battery for soothing unit
operation. Requires one "AAA" (LR03) alkaline battery for toy bar
operation. Batteries not included.
• Weight limit: 9 kg (20 lbs)
• This product does not replace a cot or bed. Should the child need
to sleep, place the child in a suitable cot or bed.
• Product features and decorations may vary from photographs.
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2011 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA X3844pr-0726
Great Britain: Vanwall Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500303. www.service.mattel.com/uk.
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked
Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory
Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
Asia: Mattel East Asia Ltd, Room 1106, South Tower, World Finance
Centre, Harbour City, Tsimshatsui, HK, China.
Malaysia: Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.
(993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe,
Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel: +603-3341 9052.
2
Parts
IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad.
Toy Bar
Head Support
Seat Back Tube
Pad
2 Toys
Left Base Wire
Base Tube
2 Retainers
Footrest
Right Base Wire
2 Feet
M5 x 20 mm Screw – 2
#8 x 2,2 cm Screw – 2
Note: Screws shown actual size. Tighten or loosen all screws
with a Phillips screwdriver. Do not over-tighten the screws.
3
Loading...