Fisher-Price X3419 User Manual
Please read this manual and save it
with your original sales receipt.
Tools needed for assembly: Phillips Screwdriver
(not included) and Assembly Tool (included).
Use only with a Power Wheels
®
12 Volt Lead Acid
Rechargeable Battery with Built-in Thermal Fuse
and Power Wheels
®
12 Volt Charger with Type
12V Connector (both included).
Requires four "C" (LR14)
alkaline
batteries
(not included) for FM Radio operation.
Owner's Manual
with Assembly
Instructions
For Model X3419
Product features may vary
from the picture above.
®
CUSTOM EDITION
Please read this manual and save it
with your original sales receipt.
Tools needed for assembly: Phillips Screwdriver
(not included) and Assembly Tool (included).
®
Use only with a Power Wheels
Rechargeable Battery with Built-in Thermal Fuse
and Power Wheels
12V Connector (both included).
Requires four "C" (LR14)
(not included) for FM Radio operation.
®
12 Volt Charger with Type
12 Volt Lead Acid
alkaline
batteries
Product features may vary
from the picture above.
Owner's Manual
with Assembly
Instructions
For Model X3419
IMPORTANT INFORMATION
ELECTRICAL HAZARD
WARNING
• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.
• PREVENT FIRE
- Never modify the electrical system. Alterations could cause a re resulting in serious
injury and could also ruin the electrical system.
- Use of the wrong type battery or charger could cause a re or explosion resulting in
serious injury.
- Use of Power Wheels
could cause overheating, re or explosion.
• The battery must be handled by adults only. The battery is heavy and contains sulfuric
acid (electrolyte). Dropping the battery could result in serious injury.
• Never allow children to charge the battery. Battery charging must be done by adults
only. A child could be injured by the electricity involved in charging the battery.
• Read the safety instructions on the battery.
• Examine the battery, charger and their connectors for excessive wear or damage each
time you charge the battery. If damage or excessive wear is detected, do not use the
charger or the battery until you have replaced the worn or damaged part.
• HOT motors. Handle carefully.
®
components in products other than Power Wheels® vehicles
RIDING HAZARD
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required
• Never Ride at Night.
• Keep Children Within Safe Riding Areas.
These areas must be:
- away from swimming pools and other bodies of water to prevent drownings
- generally level to prevent tipovers
- away from steps, steep inclines, cars, roads and alleys.
• Riding Rules
Make sure children know and follow these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 2 (two) riders at a time.
WARNING
X3419pr-0920
2
IMPORTANT INFORMATION
• Read this manual carefully for important safety
information and operating instructions before using
your vehicle. Keep this manual for future reference, as it
contains important information.
• The vehicle is designed for use on grass, asphalt, and
other hard surfaces; on generally level terrain; and by
children 3 years of age and older. Do not exceed the
maximum weight capacity of 130 lbs (59 kg).
• Your new vehicle requires adult assembly. Please set
aside at least 60 minutes for assembly.
• Use this vehicle ONLY outdoors. Most interior flooring can
be damaged by riding this vehicle indoors. Fisher-Price®
will not be responsible for damage to the floor if the
vehicle is used indoors.
• You must charge your battery for 18-30 hours before
you use your vehicle for the first time. We recommend
charging your battery before beginning assembly. Please
see the Battery Charging section for detailed instructions.
• The battery charger is not a toy.
• Do not short circuit the battery.
• Adults Note: Regularly examine the charger for damage
to the cord, plug, housing or other parts that may result
in the risk of fire, electric shock or injury. In the event of
any damage, do not use the charger until the damage has
been properly repaired.
• Your Power Wheels® 12 volt battery is equipped with
a built-in thermal fuse. The thermal fuse is a self-resetting
safety device which automatically “trips” and shuts down
operation of the vehicle if the vehicle is overloaded or the
driving conditions too severe. Once a fuse has “tripped”,
remove your foot from the pedal and wait approximately
25 seconds before operating the vehicle again. To avoid
repeated automatic shut-downs, avoid severe
driving conditions.
• If a thermal fuse in a battery continually trips under
normal driving conditions, please contact your local
Power Wheels® Authorized Service Center.
• To prevent damaging the motors and gears, teach your
child to stop the vehicle before switching direction.
• If you have any questions about your Power Wheels®
vehicle, please call our toll-free service lines at
1-800-348-0751. Trained customer service representatives
are available to take your call in English or French.
Habla Español? Si usted tiene alguna pregunta ó necesita
asistencia llame gratis 1-800-348-0755 para los Estados
Unidos. Tenemos representantes que hablan español para
atender su llamada.
• For your convenience, Power Wheels® maintains
an independently owned and operated Authorized
Service Center Network with more than 300 authorized
service centers nationwide. Our authorized service centers
will repair or replace parts under warranty at no extra
charge, and can perform non-warranty repairs for a minimal
charge. To find the authorized service center nearest you,
please visit us online at www.powerwheels.com or call
1-800-348-0751.
• Please visit us online at www.powerwheels.com to
register your vehicle.
3
X3419pr-0920
PARTS
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than
return this product to the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no
parts are discarded.
Note: Some parts of this product have been packed with a protective foam cover. After removing the foam cover, you may
notice a cloudy film on the parts. Wipe these parts with a clean, dry, soft cloth to remove this residue.
2 Doors
(Left and Right)
Vehicle
Bumper
Front End
Seat
Windshield/Dash
Hood
X3419pr-0920
Truck Bed
Steering Column
2 Wings
(Left and Right)
4
PARTS
Steering Wheel
2 Headlights
(Left and Right)
2 Wheel Covers
2 Short Seat Belts Long Seat Belt
2 Headlight Lenses
(Left and Right)
2 Bushings2 Door Plates
2 Taillights
(Left and Right)
Steering Wheel Cap
7
/16" (1,1 cm) Washer – 2
3
/8" (0,95 cm) -16 Lock Nut – 2
Steering
Column Cap
2 Hubcaps
2 Front Wheels
(Left and Right)
12 Volt Battery
Assembly Tool
Key Assembly
12 Volt Charger
5
/32" (0,4 cm) x 11/2" (3,8 cm) Pin – 1
3
/4" (1,9 cm) Screw – 34
#8 x
1
/4 x 11/4" (0,6 cm x 3,1 cm) Screw – 2
Fasteners Shown Actual Size
For your convenience, we included extra fasteners!
Note: Tighten and loosen all screws with a Phillips
screwdriver. Do not over-tighten the screws.
5
X3419pr-0920
PARTS PICTURE
X3419pr-0920
Note: Some parts shown are assembled on both sides of the vehicle.
6
BATTERY CHARGING
ELECTRICAL HAZARD
WARNING
• Battery can fall out and injure a child
if vehicle tips over. Always use
battery retainer.
• PREVENT FIRE
- Never modify the electrical system.
Alterations could cause a re resulting
in serious injury and could also ruin the
electrical system.
- Use of the wrong type battery or
charger could cause a re or explosion
resulting in serious injury.
- Use of Power Wheels
®
components
in products other than Power Wheels
vehicles could cause overheating, re
or explosion.
• The battery must be handled by adults
only. The battery is heavy and contains
sulfuric acid (electrolyte). Dropping the
battery could result in serious injury.
• Never allow children to charge the
battery. Battery charging must be done
by adults only. A child could be injured
by the elec-tricity involved in charging
the battery.
• Read the safety instructions on
the battery.
• Examine the battery, charger and
their connectors for excessive wear
or damage each time you charge the
battery. If damage or excessive wear is
detected, do not use the charger or the
battery until you have replaced the worn
or damaged part.
CAUTION
Use the charger in dry locations only.
• Make sure you charge the battery for at least 18 hours
using the enclosed Power Wheels® 12 volt charger before
operating your vehicle for the first time. Charge the
battery for at least 14 hours after each use of the vehicle.
Never charge the battery longer than 30 hours. Failure to
follow these instructions may damage your battery and
will void your warranty.
• Use only a Power Wheels® 12 volt charger with “12V”
connector (input 120 VAC, 60Hz, with an output of
12 VDC) to charge your Power Wheels® 12 volt battery.
Battery
®
Charger
Connector
• Plug the charger connector into the battery.
• Plug the charger into a standard wall outlet.
Notes:
- If power flow to the wall outlet is controlled by a switch,
make sure the switch is “ON”.
- Use the charger only in a wall outlet. Do not plug the
charger into a ceiling outlet.
• Before charging the battery, examine the battery case
for cracks and other damage which may cause sulfuric
acid (electrolyte) to leak during the charging process. If
damage is detected, do not charge the battery or use it in
your vehicle. Battery acid is very corrosive and can cause
severe damage to surfaces it contacts.
• Do not place the battery on a surface (such as kitchen
counter tops) which could be damaged by the acid
contained inside the battery. Take precautions to protect
the surface on which you place your battery.
• Charge the battery in a well ventilated area.
• Once the battery is charged, disconnect the battery
connector from the charger connector. Unplug the
charger from the wall outlet. Refer to the Battery
Installation section for instructions on installing your
battery. If your battery is already installed in your vehicle,
simply re-connect the motor harness connector to
the battery.
• You do not need to remove the battery from your vehicle
to recharge it.
7
X3419pr-0920
ASSEMBLY
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle's unassembled state, or by
electrical items. Care should be taken in
unpacking and assembly of the vehicle.
Children should not handle parts,
including the battery, or help in assembly
of the vehicle.
Front Axle
Front Wheel
2
Hint: There is a right and a left front wheel. Place the right
wheel (marked R) on the passenger side of the vehicle, and
the left wheel (marked L) on the driver side of the vehicle.
• Place a front wheel onto each front axle.
Note: Protective caps have been added to the threaded
metal parts to prevent damage during shipping. Please
remove and throw the caps away.
Bushing
Front Axle
7
/16" (1,1 cm) Washer
Wheel Cover
3
• Fit a wheel cover onto each front wheel.
Front Wheel
1
• Slide a 7/16" (1,1 cm) washer onto a front axle.
• Fit a bushing (flat side first) onto the front axle.
• Repeat this procedure to assemble the other 7/16" (1,1 cm)
washer and bushing to the other front axle.
X3419pr-0920
RIGHT SIDE VIEW
8
3
/8" (0,95 cm) -16 Lock Nut
ASSEMBLY
Front End
Assembly Tool
4
• Place a 3/8" (0,95 cm) -16 lock nut (rounded side out)
onto a front axle.
IMPORTANT: Tighten the lock nut firmly using the closed
end of the assembly tool.
• Repeat this procedure to fasten the other front wheel
assembly with the other 3/8" (0,95 cm) -16 lock nut.
6
• Fit the front end onto the vehicle.
• Insert the tabs on the back edge of the front end into the
slots in the vehicle.
"
#8 x 3/4
(1,9 cm) Screws
7
Hubcap
5
• Align the slot in a hubcap with the rib in the wheel cover.
"Snap" a hubcap into the center of each wheel cover.
Wheel
Cover
• Insert two #8 x 3/4" (1,9 cm) screws through the front end
and into the vehicle. Tighten the screws.
9
X3419pr-0920
Loading...