Fisher-Price X2868 Instruction Sheet
®
®
Keep these instructions for future reference as they contain
important information. IMPORTANT: Please read all
“Consumer Information” before operating your vehicle.
CAUTION:
To prevent entanglement, keep all hair
away from the wheels.
I. CONTENTS/ FEATURES
This set includes: 1 vehicle, 1 transmitter, 1 antenna tube.
1
Forward
2
Reverse left
3
Battery cover
4
ON(I) / OFF(O)
1
3
2
X2867 Grave Digger
X2868 Monster Mutt
Antenna tube
4
O
CAUTION:
3+
X2867/X2868-0920
Surfaces may become hot and cause
®
Asst.X2866
burns if electronics get wet. Do not operate vehicle
through water or snow.
A. Insert fl exible antenna wire through
antenna tube, then insert end of tube
fi rmly into transmitter hole.
B. Tie a knot at the end of the fl exible
antenna wire to keep the tube in place.
I
4
O
I
II. BATTERY INSTALLATION
(Transmitter & Vehicle)
Requires 2 AAA alkaline batteries for the vehicle and 2 AA
alkaline batteries for the transmitter. Batteries not included.
Vehicle
1. Unscrew the battery cover with a Phillips head
screwdriver (not included).
2. Your vehicle requires 2 AAA alkaline batteries.
Install with polarity (+/-) as shown inside the
battery compartment.
3. Replace battery cover and tighten screw.
Transmitter
1. Remove battery cover as shown.
2. Transmitter requires 2 AA alkaline batteries. Install with
polarity (+/-) as shown inside the battery compartment.
3. Replace battery cover and push shut.
NOTE: Once the batteries are installed the transmitter
will always be “ON” and will work automatically the
moment you use it.
III. OPERATION
2 x AAA
2 x AA
FORWARD REVERSE LEFT
Loading...