3 4
Launch cars from the pit stop. Pagoda Grandstand.
SUPER
SPEEDWAY
INSTRUCTIONS
Please keep these instructions for future reference as they contain important information.
4
+
INSTRUCTION SHEET
SPECIFICATIONS
Toy :
SUPER SPEEDWAY
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
W7171
accordian
White Offset
0920
A3
One
Black
70 lb.
001a
BATTERY
INSTALLATION
through the track set.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product
before being charged.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended
• Unscrew the battery cover with a Phillips head screwdriver
(not included).
• Install 3 new "C" size alkaline batteries in the orientation
(+/-) shown.
• Replace battery cover and tighten screw.
• For best performance, use only alkaline batteries.
• Replace batteries when booster can no longer propel vehicle
are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may
explode or leak.
CONTENTS
5
APPLY
LABELs
4
G
1
E
D
3
4
E
G
2
FF
1
3
4
A
A
D
5
2
C
C
1
B
B
Helpful Hint: Apply labels before assembly by number as indicated.
7
2
7
WARNING:
CHOKING HAZARD
Not for children under 3 years.
– Small parts.
3
5
6
Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities.
For product sold in USA
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
(
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
For product sold in Canada • Pour les produits vendus au Canada
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. • CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA.
(VALID FOR CANADA ONLY • VALABLE AU CANADA SEULEMENT)
Operation is subject to the following two conditions :
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
(1) Il ne doit pas produire de brouillage et (2) il doit pouvoir tolérer tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre son fonctionnement.
6
1
5
3
2
4
©2012 Mattel. All Rights Reserved.
Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6
4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 1106,
South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th Floor, Menara
Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:03-78803817, Fax:03-78803867.
© Disney/Pixar
service.mattel.com
W7171-0920
ASSEMBLY
a
1 of 4 page4 of 4 page
b
1
2
2
1
1
3
G
G
D
D
A
2
A
B
c
C
TO pLAY
Roll cars into
a
1
B
C
Start with 1. Then try different speed
settings for best performance.
b
a
booster to start.
4
4
3
b
3
Shotcut!
2
c
5
5
d
E
Cross the checkered
flag to win!
F
E
F
Additional vehicles not included.
Not for use with some Cars Micro Drifters™ vehicles.
3 of 4 page2 of 4 page