Fisher-Price W3423 Instruction Sheet

Click!

30 cm

12"

SEE OTHER SIDE FOR STEPS 1-3

Hang Brackets

Remove black-printed liner from Command™ Strips and attach each bracket into the designated notch of the poster as shown.

Bracket should not overlap the poster.

Press bracket firmly onto wall and hold, pressing for

30 seconds.

Hang Track on Wall

1. Once poster and brackets are mounted on wall, attach tower as shown.

Let's Play!

Load car and launch!

Send your cars

in different directions!

Switch ON.

PRESS FIRMLY

FOR 30 SECONDS

NOTE: For optimal adhesion performance

3M recommends waiting 1 hour before adding weight to Command™ Strips.

Battery Installation

• Unscrew the battery cover with a Phillips head

screwdriver (not included).

• Install 2 "D" size (LR20) alkaline batteries (not

included) in the orientation (+/-) shown.

• Replace battery cover and tighten screw.

• For longer life use alkaline batteries.

• Replace batteries when vehicles can no longer

reach the top of the tower.

• When exposed to an electrostatic source, the

product may malfunction. To resume normal operation, remove and re-install the batteries.

Red arrow should line up with arrow on bracket.

CORRECTCORRECT

IMPORTANT NOTE: Elevator will not function if Part B is not properly connected as shown in ASSEMBLE TRACK PIECES steps 1 and 2.

INCORRECTINCORRECT

2. Attach remaining track pieces as shown.

10.75”10.75”

12.5”

Reattaching & Removal

Mounting brackets are designed to break away from the set without causing surface damage. If mounting plate separates from bracket, snap bracket back into place.

Connect

FOR INSTRUCTIONAL VIDEOS

www.Hotwheels.com/wall-tracks

Create your own set-ups with other Wall Tracks™ sets.

AND MORE GO TO

I=ON

O=OFF

To remove brackets from the wall entirely:

1. NEVER pull strip towards you.

2. Hold bracket gently to prevent it from snapping fingers. DO NOT press against wall.

3. Grab tab on Command™ Strip and SLOWLY

STRETCH STRAIGHT DOWN ALONG WALL AT LEAST 12 INCHES until bracket and strip

release.

Purchase medium Command™ Refill Strips to reapply to your wall.