W3131
Please keep this instruction sheet for future reference,
as it contains important information.
Requires one “AA” battery (included) for operation.
Adult assembly is required.
Tool required: Phillips screwdriver (not included)
www.fisher-price.com
Assembly Setup
Clips
1
• Fit the clips onto the back of the
activity center and tighten the screws
in each clip. Do not over-tighten.
Hint: The clips are designed to fit on
the activity center one way. If the clips
do not seem to fit, turn them around
and try again.
“T” Straps
WARNING
Prevent Entanglement Injury
This product may not attach
to all crib designs. Do not
add additional strings or
straps to attach to a crib
or playpen.
• Slide the clips onto the play yard
wall. Push down to be sure it is
completely attached.
• Always attach all provided fasteners
(strings, straps, clamps, etc.) tightly
to a crib or playpen according to the
instructions. Check frequently.
2
• Fit the “T” straps on the mat through
the slots in the toys. Make sure
the end of each strap forms a “T”
through the slot.
2