Page 1
WARNING
V
u
hi
e
a
•
v
TO AVOID SERIOUS INJURY:
TO A
• Ad
• Adult supervision is required.
Never use near cars and other motor
•
•
vehicles, near streets, steps, sloped
ve
driveways, hills, roadways, alleys, swimming
riv
pools or other bodies of water.
poo
• Always wear shoes.
• Alw
• Never allow more than one rider.
IMPORTANT! It is a good practice to start training
children very young regarding the importance of
helmet use. When children are older and riding
bicycles and faster vehicles, it is important that
they use a helmet each and every time they ride.
For this reason, even while riding a tricycle, it is a
good idea to familiarize your child with helmet use,
so that it becomes a habit for life. Choose a helmet
that complies with requirements of the applicable
certifying agency for bicycle helmets.
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required. Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).
Age: 2-5 years; Weight limit: 55 lbs (25 kg).
Product features and decoration may vary from photos shown.
www.fi sher-price.com
Page 2
Parts Assembly
• Tighten assembled screws with a Phillips screwdriver. Do not
over-tighten the screws.
• Please save all packaging material until assembly is complete to
ensure that no parts are discarded. Wipe each part with a clean,
dry cloth before assembly.
• Label sheet is not shown.
CAUTION
This product contains small parts in its
unassembled state. Adult assembly is required.
PUSH
Seat
Frame
Fork
Handlebar Front
Handlebar Back
Front Wheel Assembly
2 Rear Wheels
Seat
Frame
1
• Fit the seat onto the frame. Push rmly near the back end of the
seat to "snap" it into place.
Bushing
(Grooved Side Down)
Rear
Wheel
(Indented
Side Down)
Wheel Hub
(Flat Side Down)
2 Fork Covers
2 Wheel Caps
FASTENERS SHOWN ACTUAL SIZE
Straight Axle
4 Pedal Hubs
*We’ve included one extra
.354" (0,9 cm) cap nut for
.354"
#8 x ¾" (1,9 cm) Screw - 6.354" (0,9 cm) Cap Nut - 2*
#8 x 2¼" (5,7 cm) Screw - 1
2 Wheel Hubs
2 Bushings
your convenience.
Straight
Axle
Straight
.354" (0,9 cm)
Cap Nut
2
• Place one end of the straight axle into a .354" (0,9 cm) cap nut.
Tap the end of the straight axle with a hammer. Pull on the cap
nut to be sure it is securely attached to the straight axle.
• Slide a wheel hub, at side down, onto the straight axle.
• Slide a rear wheel, indented side down, onto the straight axle.
• Slide a bushing, grooved side down, onto the straight axle.
2
Axle
Page 3
Straight Axle Assembly
Wheel Hub
Wheel Cap
3
Bottom View
• Turn the frame upside down.
• Insert the straight axle assembly through the holes in the rear of
the frame.
Wheel
(Flat Side First)
Straight Axle
Bushing
(Smooth Side First)
4
• Turn the assembly upright.
• Slide a bushing, smooth side rst, onto the end of the
straight axle.
• Slide a wheel, at side rst, onto the end of the straight axle.
• Slide a wheel hub, pointed end rst, onto the end of the
straight axle.
Wheel Hub
(Pointed End First)
6
• Fit the tabs on the wheel cap into the slots in the wheel hub.
Push to "snap" the wheel cap in place.
• Repeat this procedure to attach the other wheel cap to the other
wheel hub.
Front Wheel
Assembly
Pedal Axle
Tabs
Pedal Hubs
7
• Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs
t into the slot in each pedal hub.
• Press the pedal hubs into the center of the front wheel until they
are ush with the surface of the front wheel.
• Repeat this procedure on the other side of the front wheel
assembly to assemble the other two pedal hubs.
Fork Arms
.354" (0,9 cm)
Cap Nut
5
• Fit a .354" (0,9 cm) cap nut on the end of the straight axle.
Hint: You may need the help of another adult to hold the other
end of the straight axle in place.
• Tap the cap nut with a hammer. Gently pull the rear wheel to
be sure the cap nut is securely attached to the straight axle.
Groove
#8 x ¾" (1,9 cm)
Screws
8
• Place the front wheel assembly between the fork arms. Make
sure the pedal axle ts into the groove at the bottom of each
fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #8 x ¾" (1,9 cm) screws into the fork cover and tighten.
• Repeat this procedure to attach the other fork cover to the other
fork arm.
Pedal Axle
Fork Cover
3
Page 4
Assembly
SU
ASSISTANCE
Fork Post
9
• With the fork covers facing the rear wheels, insert the fork post
up through the hole in the neck of the frame.
Rear Wheels
Fork Covers
Decoration
• Before applying the decorative labels, wipe the surface of the
trike with a clean, dry cloth to remove any dust or oils.
• Refer to the color photos located on the package aps to apply
the labels.
• For best results, avoid repositioning labels once applied.
Consumer Information
• Periodically, check the plastic parts and if broken or cracked,
dispose of them properly.
• Periodically, check all fasteners regularly to be sure they are
tight. If the fasteners are not tight, tighten them as necessary.
• To clean, use a mild soap and water solution and a clean cloth.
Rinse clean with water to remove soap residue.
N
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
MER
Handlebar Front
Handlebar Back
¾" (1,9 cm)
Screw
¾" (1,9 cm) Screw
2¼" (5,7 cm)
Screw
10
• Fit the handlebar front to the fork post.
Hint: The handlebar front is designed to assemble to the fork
post one way.
• Fit the handlebar back to the fork post and handlebar front. Hold
them together rmly.
• First, insert the remaining #8 x ¾" (1,9 cm) screws through the
outer holes in the handlebar back and tighten.
• Then, insert the #8 x 2¼" (5,7 cm) screw through the center
hole in the handlebar back and tighten.
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN MEXICO 00989pr-1035
Loading...