Fisher-Price V8902 Instruction Sheet

BATTERY INSTALLATION

Unscrew and lift cover away from the products. Install battery for Victor and replace batteries for Searchlight as indicated inside the battery compartment. For longer life use only alkaline batteries. Requires 1 “AA” (LR6) battery for Victor, 2 “AAA” (LR03) batteries for Searchlight. If this toy begins to operate erratically, you may need to reset the electronics. Remove the batteries from the toy and replace it.

BATTERY SAFETY INFORMATION

In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury

or ruin your toy (product). To avoid battery leakage:

• Non-rechargeable batteries are not to be recharged.

• Rechargeable batteries are to be removed from the product before being charged

(if designed to be removable).

• Rechargeable batteries are only to be charged under adult supervision (if designed to

be removable).

• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

• Do not mix old and new batteries.

• Only batteries of the same or equivalent type as recommended are to be used.

• Batteries are to be inserted with the correct polarity.

• Exhausted batteries are to be removed from the product.

• The supply terminals are not to be short-circuited.

• Dispose of battery(ies) safely.

• Do not dispose of this product in a fire. The batteries inside may explode or leak.

Required tool:

Phillips screwdriver

(not included)

Victor

1,5V x 1

“AA” (LR6)

INSTRUCTIONS

Please keep these instructions for future reference as they contain important information.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

NOTE: Changes or modifications not expressively approved by the manufacturer responsible for compliance could void the

user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

• CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A LA NORME NMB-003 DU CANADA.

• Operation is subject to the following two conditions: (1) this device may not cause interference,

and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

• L’utilisation de ce produit est sujette aux conditions suivantes : (1) il ne doit pas produire de brouillage et

(2) il doit pouvoir tolérer tout brouillage reçu, même si ce brouillage est susceptible de compromettre son fonctionnement.

Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities.

Based on the Railway Series by The Reverend W Awdry. © 2011 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited. © HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.

PRINTED IN CHINA.

Manufactured for Fisher-Price. ©2011 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc., unless otherwise indicated. Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.

Searchlight

1,5V x 2

“AAA” (LR3)

Off

V8902

ID.V8902-0920G1

Assembly

1. Attach the searchlight to the base, as shown.

Once these pieces are

snapped together, they cannot be taken apart.

2. Attach the base to any existing Trackmaster track layout (sold separately).

How To Play

1. Set the switch on top of the searchlight to the ON position to turn on the light.

Attach the searchlight to any existing Trackmaster track layout (sold separately).

Set the brake lever to the STOP position. As the engine

approaches, the brake switch will cause it to stop in front of the searchlight.

While the engine is stopped in front of the searchlight, the

wheels of the engine will power the searchlight to spin around.

2. Set the brake lever to

the GO position to send

the engine on its way around the track.

3. You can point and shine the searchlight manually when the engine is not powering it.

Set the switch to the

GO position.

Do not touch the spinning

searchlight while the engine is powering it.

STOP

Item No : V8902-0920G1 Version : EL Size : 16.54" x 11.69" (A3) Paper : Woodfree paper 80 gsm Color : Black Date : April 1, 2011 (WC)

CAUTION:

To prevent entanglement, keep hair away from wheels.

04/01/11 Remark for G1

- Revised copies and line art drawing

ADULT ASSEMBLY REQUIRED.

No tools required for assembly.