Fisher-Price V7867 User Manual
www.fisher-price.com
V7867
Please keep this instruction sheet for future reference,
as it contains important information.
Requires six “AAA” (LR03) alkaline batteries (not included) for operation.
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included)
Wipe with a clean, damp cloth. Do not immerse the vehicle or remote controller.
Actual product may appear different than the photos shown.
Assembled Parts
6 Leg Supports
3 Table Tops
Storage Drawer 6 Table Legs
5 Long Straight Tracks 5 Curved Tracks 2 Short Guardrails
2 "Y" Tracks
Short Straight Track
Curved Ramp Track Easy Load TrackLong Guard Rail
Curved Bridge Track Bridge Track
5 Bridge Supports Crane
"Y" Support
2 Bridge Rails
Ramp Track
Note: Tighten or loosen all screws with a
Phillips screwdriver. Do not over-tighten.
#8 x ¾" (1,9 cm) Screw – 30
Shown Actual Size
2
Table Assembly
CAUTION
This product contains small parts in an
unassembled state. Adult assembly is required.
Table Leg
Table Leg
Leg Supports
1
Fit the leg supports into the slots in each table leg. •
Hint: The leg supports are designed to fi t onto the table
legs one way. If a leg support does not seem to fi t, turn it
around and try again!
3
Lay a table top with the bottom side up on a fl at surface.•
Fit the leg assembly into the grooves in the table top. •
4
Insert six screws into the holes in the leg assembly •
and tighten.
Repeat steps 1-4 to assemble the other two tables. •
Table Top
Insert two screws into each leg support and tighten. •
2
5
Slide the storage drawer into the grooves in a •
storage table.
3
Storage
Drawer
Loading...