Fisher-Price V7609 Instruction Sheet

www.fisher-price.com

• Please keep this instruction sheet

• Please keep this instruction sheet

for future reference, as it contains
important information.

• Adult assembly is required.

• Tools required for assembly:
Phillips screwdriver and adjustable
wrench (both not included)

• Ages: 4 years and up;
Weight Limit: 110 lbs (50 kg)

• Before each use, check to make
sure the fasteners are secure.

• Your product comes with
replacement warning labels which
you can apply over the factory
applied warning label if English
is not your primary language.
Select the warning label with the
appropriate language for you.

for future reference, as it contains
important information.

• Adult assembly is required.

• Tools required for assembly:
Phillips screwdriver and adjustable
wrench (both not included)

• Ages: 4 years and up;
Weight Limit: 110 lbs (50 kg)

• Before each use, check to make
sure the fasteners are secure.

• Your product comes with
replacement warning labels which
you can apply over the factory
applied warning label if English
is not your primary language.
Select the warning label with the
appropriate language for you.

www.fisher-price.com

Consumer Information

WARNING

To avoid serious injury:

• Keep away from cars and other
motor vehicles, streets, steep
inclines, steps, sloped driveways,
hills, roadways, alleys, swimming
pools and other bodies of water.

• Protective equipment should be
worn. Use helmet, wrist guards,
kneepads and elbow pads.

• Always wear shoes.

• Never allow more than 1 rider.

• Never ride at night.

• Not for children with a body weight
of more than 50 kg (110 lbs).

• Running or jumping onto
skateboards can be dangerous.

IMPORTANT! Please take a few moments to
review the following safety tips:

• Please use with caution as this product
requires skill to operate safely to avoid falls,
collisions, and injuries to yourself (the rider)
and others.

• Adult supervision is required.

• Wear shoes or sneakers that provide good
support. Do not wear open-toe shoes.

• Keep loose laces and pant legs away from
the wheels.

• Choose areas for riding that are free of
obstacles.

• Ride on smooth, paved surfaces away from
motor vehicles.

• Avoid wet or uneven surfaces; sharp bumps,
drainage grates, and other sudden surface
changes, as this product may suddenly stop.

• Towing riders with bicycles or cars is unsafe.

• Never ride at night.

• Avoid colliding with pedestrians.

• Learn to stop safely.

• Avoid excessive speed associated with
downhill rides.

• Do not use in a skateboard park or in any
setting where more advanced skills and
equipment are needed to perform trick and/
or aerial maneuvers.

2

Helmet Use One-Time Assembly

Your child needs a helmet (not included)
speci cally designed for skateboarding.
Skateboarding helmets can withstand multiple
impacts and provide additional coverage for
the back of the head.

Your child must always wear a helmet when
using this product. Helmets reduce the energy
of some impacts, minimizing or preventing
head injuries. Make sure your child’s helmet
has a label stating/certifying conformance with
the applicable certifying agency and includes
the intended age requirement for use with a
child. In addition, children ages 1 to 5 years
require helmets speci cally designed and
labeled for younger children. These helmets
cover a larger portion of the head and provide
more protective coverage than any other
helmets for older persons.

For maximum protection during an impact,
the helmet must be properly secured to your
child’s head. The helmet must have a strap
that goes under the chin with a buckle that
stays securely fastened. The helmet should be
worn level/low on the forehead, not tilted back.
The chinstrap should be adjusted so there is
no slack and it is  rmly buckled (see helmet
instructions). After securing the helmet to your
child’s head, test to be sure that the strap
stays tight, the buckle remains secure and the
helmet cannot be removed from your child’s
head by twisting or pulling the helmet. Remind
your child to remove the helmet when playing
on any kind of playground equipment or any
place where the helmet may present a risk
of strangulation.

If the helmet is involved in a crash, replace
it or have it examined by the manufacturer
before reuse.

CAUTION

This product contains small parts

in its unassembled state.

Adult assembly is required.

Screws

M5 x 25 mm Screw x 4

• Insert four M5 x 25 mm screws into the base
of the handle.

• Hand-tighten the screws.

• Turn the handle upside-down to be sure the
screws are attached to the base.

Hint: Once the screws are attached to the
base of the handle, they cannot be removed.

3