Press for real
baby sounds!
V6939
Please keep this instruction sheet for future reference,
Requires two “AAA” batteries (included) for operation.
as it contains important information.
Adult assembly is required for battery replacement.
Tool required for battery replacement:
Phillips screwdriver (not included).
www.fi sher-price.com
Battery Replacement and Power Switch
For best performance, we recommend
replacing the batteries that came with
this toy with two, new “AAA” (LR03)
alkaline batteries.
• Open the fasteners on the back of the doll.
• Remove the sound box from inside the doll.
• Loosen the screws in the sound box
battery compartment door with a Phillips
screwdriver. Remove the door.
• Remove the exhausted batteries and
dispose of them properly.
• Insert two, new “AAA” (LR03) alkaline
batteries.
Hint: We recommend alkaline batteries for
longer battery life.
• Replace the battery compartment door and
tighten the screws. Do not over-tighten.
• Fit the sound box back inside the doll. Make
sure the button on the sound box is facing
the front of the doll.
• If this toy begins to operate erratically, you
may need to reset the electronics. Slide the
power switch off and then back on.
• When sounds from this toy become faint
or stop, it’s time for an adult to change the
batteries.
• Slide the power switch to ON .
• Replace the sound box in the doll and
close the fasteners.
Hint: Make sure the button on the sound
box is facing the front of the doll.
• When you are finished playing with this toy,
slide the power switch OFF .