Fisher-Price T7161 User Manual

www.fisher-price.com

T7161

Battery Installation

• Please keep this instruction sheet for future
reference, as it contains important information.

1.5V x 6

“AAA” (LR03)

We recommend the use of alkaline

batteries for longer battery life.

Vehicle

• Loosen the screws in the bottom of
the vehicle with a Phillips screwdriver.

• Lift the top of the vehicle off of the

chassis to access the battery
compartment. Insert three “AAA”
(LR03) alkaline batteries.

• Replace the top of the vehicle and

tighten the screw with a Phillips
screwdriver. Do not over-tighten

• If the vehicle begins to operate

erratically, you may need to reset the
electronics. Remove the batteries and replace them in the toy.

• Requires six “AAA” (LR03) alkaline batteries
(not included).

• Adult assembly is required for battery installation.

• Tool required for battery installation: Phillips
screwdriver (not included).

IMPORTANT! Under normal use conditions, the batteries in the vehicle will require
replacement more often than the batteries in the remote controller. For additional
information, see the troubleshooting section.

Remote Controller

• Locate the battery compartment on the bottom
of the remote controller.

• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door and insert three
“AAA” (LR03) alkaline batteries.

• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver.
Do not over-tighten.

• If the remote controller begins to operate erratically, you may
need to reset the electronics. Remove the batteries
and replace them in the remote controller.

• Protect the environment by not disposing of this product with
(2002/96/EC). Check
(Europe only).

your local authority for recycling advice and facilities

2

household waste