Fisher-Price T6991 User Manual

Owner's Manual
with Assembly Instructions
For Model T6991
• Please read this manual and save it with your
• Please read this manual and save it with your
original sales receipt.
• • Tool needed for assembly: Phillips Screwdriver (not included).
• Use only with the included Power Wheels
®
12 Volt Lead-Acid Rechargeable, Battery with Built-in Thermal Fuse and a Power Wheels
®
12 Volt Charger with type 12V connector (both included).
• Requires four "C" (LR14) alkaline batteries (not included) for FM radio operation.
(not included).
• Use only with the included Power Wheels 12 Volt Lead-Acid Rechargeable, Battery with Built-in Thermal Fuse and a Power Wheels 12 Volt Charger with type 12V connector (both included).
• Requires four "C" (LR14) alkaline batteries (not included) for FM radio operation.
®
®
Owner's Manual
with Assembly Instructions
For Model T6991
IMPORTANT INFORMATION
ELECTRICAL HAZARD
DANGER
• To prevent electric shock, do not immerse in water; wipe clean with a damp cloth.
WARNING
• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.
PREVENT FIRE
- Never modify the electrical system. Alterations could cause a  re resulting in serious injury and could also ruin the electrical system.
- Use of the wrong type battery or charger could cause a  re or explosion resulting in serious injury.
- Use of Power Wheels could cause overheating,  re or explosion.
• The battery must be handled by adults only. The battery is heavy and contains
sulfuric acid (electrolyte). Dropping the battery could result in serious injury.
• Never allow children to charge the battery. Battery charging must be done
by adults only. A child could be injured by the electricity involved in charging the battery.
• Read the safety instructions on the battery.
• Examine the battery, charger and their connectors for excessive wear or damage
each time you charge the battery. If damage or excessive wear is detected, do not use the charger or the battery until you have replaced the worn or damaged part.
HOT motors. Handle carefully.
®
components in products other than Power Wheels® vehicles
RIDING HAZARD
WARNING
Prevent Injuries and Deaths
• Direct Adult Supervision Required.
• Never Ride at Night.
• Keep Children Within Safe Riding Areas. These areas must be:
- away from swimming pools and other bodies of water to prevent drownings
- generally level to prevent tipovers
- away from steps, steep inclines, cars, roads and alleys.
• Riding Rules Make sure children know and follow these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 2 (two) riders at a time.
- Never ride in cargo bed.
T6991pr-0920
2
IMPORTANT INFORMATION
Read this manual carefully for important safety • information and operating instructions before using your vehicle. Keep this manual for future reference, as it contains important information. This vehicle is appropriate for use on generally • level, rough terrain (including hard surfaces, wet and dry grass, ruts, gravel, mulch and mud) and by children 3 years of age and older. Do not exceed the maximum total weight capacity of 130 lbs (59 kg) in the passenger seating area and cargo bed. Cargo bed weight limit: 25 lbs (11,3 kg). Your new vehicle requires adult assembly. Please • set aside at least 60 minutes for assembly. This product contains a magnet. Do not use • around items that are sensitive to or affected by magnetic fi elds. Use this vehicle ONLY outdoors. Most interior fl ooring can be damaged by riding this vehicle indoors. Fisher-Price® will not be responsible for damage to the fl oor if the vehicle is used indoors. You must charge your battery for 18-30 hours before you use your vehicle for the fi rst time. We recommend charging your battery before beginning assembly. Please see the Battery Charging section for detailed instructions. The battery charger is not a toy. • Do not short circuit the battery.Adults Note: Regularly examine the charger for damage to the cord, plug, housing or other parts that may result in the risk of fi re, electric shock or injury. In the event of any damage, do not use the charger until the damage has been properly repaired.
Your Power Wheels ® 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is a self­resetting safety device which automatically “trips” and shuts down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe. Once a fuse has “tripped”, remove your foot from the pedal and wait approximately 25 seconds before operating the vehicle again. To avoid repeated automatic shut-downs, avoid severe driving conditions. If a thermal fuse in a battery continually trips under • normal driving conditions, please contact your local Power Wheels® Authorized Service Center. To prevent damaging the motors and gears, teach your • child to stop the vehicle before switching direction. If you have any questions about your Power Wheels ® vehicle, please call our toll-free service lines at 1-800-348-0751. Trained customer service representatives are available to take your call in English or French. Habla Español? Si usted tiene alguna pregunta ó necesita asistencia llame gratis 1-800-348-0755 para los Estados Unidos. Tenemos representantes que hablan español para atender su llamada. For your convenience, Power Wheels ® maintains an independently owned and operated Authorized Service Center Network with more than 300 authorized service centers nationwide. Our authorized service centers will repair or replace parts under warranty at no extra charge, and can perform non-warranty repairs for a minimal charge. To fi nd the authorized service center nearest you, please visit us on-line at www.powerwheels.com or call 1-800-348-0751. Please visit us online to register your vehicle.
3
T6991pr-0920
PARTS
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than
return this product to the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any excess lubricant.
Front Grille
Vehicle
Hood
Seat
Grille Support
T6991pr-0920
Cargo Bed
Long Seat Belt
4
2 Short Seat Belts
PARTS
Steering Wheel
Steering Column
Steering Wheel Cover
Part Not Shown: Label Sheet
2 Rear Wheels
12 Volt Charger
2 Hubcaps
12 Volt Battery
Steering Column Cap
3
#8 x
/4" Screw - 19
,25" x 2,85" Pin - 1
Wire Clip - 2
Fasteners Shown Actual Size
For your convenience, we included extra fasteners!
Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws.
5
T6991pr-0920
PARTS PICTURE
T6991pr-0920
Note: Some parts shown are assembled to both sides of the vehicle. Fasteners not shown.
6
BATTERY CHARGING
ELECTRICAL HAZARD
WARNING
• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.
PREVENT FIRE
- Never modify the electrical system.
Alterations could cause a  re resulting in serious injury and could also ruin the electrical system.
- Use of the wrong type battery
or charger could cause a  re or explosion resulting in serious injury.
- Use of Power Wheels
®
components in products other than Power Wheels® vehicles could cause overheating,  re or explosion.
• The battery must be handled by adults only. The battery is heavy and contains sulfuric acid (electrolyte). Dropping the battery could result in serious injury.
• Never allow children to charge the battery. Battery charging must be done by adults only. A child could be injured by the elec-tricity involved in charging the battery.
• Read the safety instructions on the battery.
• Examine the battery, charger and their connectors for excessive wear or damage each time you charge the battery. If damage or excessive wear is detected, do not use the charger or the battery until you have replaced the worn or damaged part.
CAUTION
Use the charger in dry locations only.
• Make sure you charge the battery for at least 18 hours using the enclosed Power Wheels® 12 volt charger before operating your vehicle for the fi rst time. Charge the battery for at least 14 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Failure to follow these instructions may damage your battery and will void your warranty.
• Use only a Power Wheels® 12 volt charger with “12V” connector (input 120 VAC, 60Hz, with an output of 12 VDC) to charge your Power Wheels® 12 volt battery.
Battery must be upright while charging.
Charger
Connector
• Plug the charger connector into the battery socket.
• Plug the charger into a standard wall outlet.
Notes:
- If power flow to the wall outlet is controlled by a
switch, make sure the switch is “ON”.
- Use the charger only in a wall outlet. Do not plug the
charger into a ceiling outlet.
• Once the battery is charged, disconnect the battery connector from the charger connector. Unplug the charger from the wall outlet. Refer to the Battery Installation section for instructions on installing your battery. If your battery is already installed in your vehicle, simply re-connect the motor harness connector to the battery.
• You do not need to remove the battery from your vehicle to recharge it.
• Before charging the battery, examine the battery case for cracks and other damage which may cause sulfuric acid (electrolyte) to leak during the charging process. If damage is detected, do not charge the battery or use it in your vehicle. Battery acid is very corrosive and can cause severe damage to surfaces it contacts.
• Do not place the battery on a surface (such as kitchen counter tops) which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you place your battery.
• Charge the battery in a well ventilated area.
7
T6991pr-0920
ASSEMBLY
WARNING
Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle.
Screws
Front Grille
Slot
1
• Fit the front grille to the vehicle, as shown.
• Be sure the tabs on both ends of the grille fit into the groove in each fender.
FRONT VIEW
Tab
2
• Insert four screws into the top of the front grille and tighten.
Hint: You may need to push the ends of the front grille to insert and tighten the outer screws and push the center of the front grille to insert and tighten the middle screws.
3
Front Grille
TOP VIEW
Front Wheel Well
SIDE VIEW
T6991pr-0920
• Insert a screw through both front wheel wells and into
the front grille. Tighten the screws.
8
ASSEMBLY
11
2 1
4
• Place the labels exactly as shown in the illustration and avoid repositioning a label once it has been applied.
12
DASH VIEW
18
Steering Wheel Large Opening
,25" x 2,85" Pin
6
• Align the hole in the steering wheel with the hole in the steering column.
• Insert the ,25" x 2,85" pin all the way through the hole in the side of the steering wheel and into the steering column, as shown.
Steering Wheel Cover
Steering Column
Lower Bend Down
5
• Wipe the steering column with a paper towel to remove any excess lubricant.
• Position the steering wheel so that the large opening is upright.
• Position the steering column with the lower bend down, as shown.
• Fit the steering wheel onto the steering column.
7
“Snap” the steering wheel cover onto the steering wheel.
Hint: If the steering wheel cover does not "snap" onto the steering wheel, you have not properly assembled the steering column to the steering wheel. Remove the pin and the steering column from the steering wheel and refer back to Assembly steps 5 and 6.
9
T6991pr-0920
Loading...
+ 19 hidden pages