it with your original sales receipt.
Tools needed for assembly:
•
screwdriver and adjustable wrench
(tools not included).
Use only with the Power Wheels
•
®
12 Volt Lead-Acid Rechargeable
Battery and
Power Wheels
® 12 Volt
Charger with Type 12V Connector
(both included).
Requires three “AA” (LR6) alkaline
•
batteries for radio operation
(batteries not included).
Please read this manual and save •
Please read this manual and save
•
it with your original sales receipt.
it with your original sales receipt.
Tools needed for assembly: •
Tools needed for assembly:
•
screwdriver and adjustable wrench
screwdriver and adjustable wrench
(tools not included).
(tools not included).
Use only with the Power Wheels• ®
Use only with the Power Wheels
•
12 Volt Lead-Acid Rechargeable
12 Volt Lead-Acid Rechargeable
Battery and Power Wheels® 12 Volt
Battery and
Charger with Type 12V Connector
Charger with Type 12V Connector
(both included).
(both included).
Requires three “AA” (LR6) alkaline •
Requires three “AA” (LR6) alkaline
•
batteries for radio operation
batteries for radio operation
(batteries not included).
(batteries not included).
Power Wheels
12 Volt
Owner's Manual
with Assembly Instructions
For Model T6138
IMPORTANT INFORMATION
ELECTRICAL HAZARD
DANGER
• To prevent electric shock, do not immerse in water; wipe clean with a damp cloth.
WARNING
Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. •
PREVENT FIRE•
- Never modify the electrical system. Alterations could cause a re resulting in
serious injury and could also ruin the electrical system.
- Use of the wrong type battery or charger could cause a re or explosion resulting
in serious injury.
- Use of Power Wheels® components in products other than Power Wheels®
vehicles could cause overheating, re or explosion.
The battery must be handled by adults only. The battery is heavy and contains •
sulfuric acid (electrolyte). Dropping the battery could result in serious injury.
Never allow children to charge the battery. Battery charging must be done by adults •
only. A child could be injured by the electricity involved in charging the battery.
Read the safety instructions on the battery. •
Examine the battery, charger and their connectors for excessive wear or damage •
each time you charge the battery. If damage or excessive wear is detected, do not
use the charger or the battery until you have replaced the worn or damaged part.
HOT• motors. Handle carefully.
RIDING HAZARD
WARNING
Prevent Injuries and Deaths•
Direct Adult Supervision Required.•
Never Ride at Night.•
Keep Children Within Safe Riding Areas. •
These areas must be:
Away from swimming pools and other bodies of water to prevent drownings. Generally level to prevent tipovers. Away from steps, steep inclines, cars, roads and alleys. -
Riding Rules •
Make sure children know and follow these rules for safe driving and riding.
Always sit on the seat. Always wear shoes. Only 2 (two) riders at a time. -
T6138pr-0920
2
IMPORTANT INFORMATION
Read this manual carefully for important safety •
information and operating instructions before using
your vehicle. Keep this manual for future reference,
as it contains important information.
The vehicle is designed for use on grass, asphalt, and •
other hard surfaces; on generally level terrain; and by
children 3 years of age and older. Do not exceed the
maximum weight capacity of 130 lbs (59 kg).
Your new vehicle requires adult assembly. Please set •
aside at least 30 minutes for assembly.
Use this vehicle • ONLY outdoors. Most interior fl ooring
can be damaged by riding this vehicle indoors.
Fisher-Price® will not be responsible for damage
to the fl oor if the vehicle is used indoors.
You must charge your battery for 18-30 hours • before you use your vehicle for the fi rst time. We recommend
charging your battery before beginning assembly. Please
see the Battery Charging section for detailed instructions.
The battery charger is not a toy. •
Do not short circuit the battery.•
Adults Note: • Regularly examine the charger for
damage to the cord, plug, housing or other parts that
may result in the risk of fi re, electric shock or injury. In
the event of any damage, do not use the charger until
the damage has been properly repaired.
Your Power Wheels• ® 12 volt battery is equipped
with a built-in thermal fuse. The thermal fuse is
a self-resetting safety device which automatically
“trips” and shuts down operation of the vehicle if the
vehicle is overloaded or the driving conditions too
severe. Once a fuse has “tripped”, remove your foot
from the pedal and wait approximately 25 seconds
before operating the vehicle again. To avoid repeated
automatic shut-downs, avoid severe driving conditions.
If a thermal fuse in a battery continually trips under •
normal driving conditions, please contact your local
Power Wheels® Authorized Service Center.
To prevent damaging the motors and gears, teach your •
child to stop the vehicle before switching direction.
If you have any questions about your Power Wheels• ®
vehicle, please call our toll-free service lines at
1-800-348-0751. Trained customer service
representatives are available to take your call in English
or French. Habla Español? Si usted tiene alguna
pregunta ó necesita asistencia llame gratis 1-800-3480755 para los Estados Unidos. Tenemos representantes
que hablan español para atender su llamada.
For your convenience, Power Wheels• ® maintains
an independently owned and operated Authorized
Service Center Network with more than 300 authorized
service centers nationwide. Our authorized service
centers will repair or replace parts under warranty at
no extra charge, and can perform non-warranty repairs
for a minimal charge. To fi nd the authorized service
center nearest you, please visit us online at
www.powerwheels.com or call 1-800-348-0751.
Please visit us online at • www.powerwheels.com to
register your vehicle.
3
T6138pr-0920
ASSEMBLED PARTS
If you experience a problem with this product, please call us at 1-800-348-0751, rather than return this product •
to a store.
Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no •
parts are discarded.
Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper •
towel to remove any excess lubricant.
Steering Wheel Cap
Vehicle
Sport Bar
Steering Wheel
Sport Bar Support - 2
Windshield
Hood
Brush Guard
T6138pr-0920
Seat
Long Seat Belt Strap
Dash
Short Seat Belt Strap - 2
Steering Column
4
ASSEMBLED PARTS
12 Volt Battery
Light Cover – 4
#8-32 x 15/8" Screw – 2
12 Volt Charger
Hood Latch – 2
Key Assembly
Spacer - 2
5
/32" x 11/2" Pin – 1
Steering Column Cap
Dash Cap - 2
#10 x 3/4" Screw – 25
#8 Acorn Lock Nut – 2
For your convenience, we included extra fasteners!
Note: Tighten and loosen all screws with a Phillips
screwdriver. Do not over-tighten the screws.
#8 x 3" Screw – 2
Fasteners Shown Actual Size
5
T6138pr-0920
ASSEMBLED PARTS
T6138pr-0920
Note: Some parts shown are assembled on both sides of the vehicle. Fasteners not shown.
6
BATTERY CHARGING
ELECTRICAL HAZARD
WARNING
Battery can fall out and injure •
a child if vehicle tips over.
Always use battery retainer.
PREVENT FIRE•
- Never modify the electrical system.
Alterations could cause a re
resulting in serious injury and could
also ruin the electrical system.
- Use of the wrong type battery
or charger could cause a re or
explosion resulting in serious injury.
- Use of Power Wheels® components
in products other than Power Wheels®
vehicles could cause overheating,
re or explosion.
The battery must be handled by •
adults only. The battery is heavy and
contains sulfuric acid (electrolyte).
Dropping the battery could result in
serious injury.
Never allow children to charge the •
battery. Battery charging must be
done by adults only. A child could be
injured by the electricity involved in
charging the battery.
Read the safety instructions on •
the battery.
Examine the battery, charger and •
their connectors for excessive wear
or damage each time you charge the
battery. If damage or excessive wear
is detected, do not use the charger or
the battery until you have replaced the
worn or damaged part.
CAUTION
Use the charger in dry locations only.
• Make sure you charge the battery for at least 18 hours
using the enclosed Power Wheels® 12 volt charger
before operating your vehicle for the first time. Charge
the battery for at least 14 hours after each use of the
vehicle. Never charge the battery longer than 30 hours.
Failure to follow these instructions may damage your
battery and will void your warranty.
• Use only a Power Wheels
connector (input 120 VAC, 60Hz, with an output of 12
VDC) to charge your Power Wheels
Battery must be upright while chargng
• Plug the charger connector into the
battery socket.
• Plug the charger into a standard wall outlet.
Notes:
- If power flow to the wall outlet is controlled by a
switch, make sure the switch is “ON”.
- Use the charger only in a wall outlet. Do not plug
the charger into a ceiling outlet.
• Before charging the battery, examine the battery
case for cracks and other damage which may
cause sulfuric acid (electrolyte) to leak during
the charging process. If damage is detected, do
not charge the battery or use it in your vehicle.
Battery acid is very corrosive and can cause
severe damage to surfaces it contacts.
• Do not place the battery on a surface (such as
kitchen counter tops) which could be damaged
by the acid contained inside the battery. Take
precautions to protect the surface on which you
place your battery.
• Charge the battery in a well ventilated area.• Once
the battery is charged, disconnect the battery
connector from the charger connector. Unplug
the charger from the wall outlet. Refer to the
Battery Installation section for instructions on
installing your battery. If your battery is already
installed in your vehicle, simply re-connect the
motor harness connector to the battery.
• You do not need to remove the battery from your
vehicle to recharge it.
®
12 volt charger with “12V”
®
12 volt battery.
Charger
Connector
7
T6138pr-0920
Assembly
WARNING
Children can be harmed by small
parts, sharp edges and sharp points
in the vehicle's unassembled state,
or by electrical items. Care should be
taken in unpacking and assembly of
the vehicle. Children should not handle
parts, including the battery, or help in
assembly of the vehicle.
Motor
Harness
Connector
Wire
Key Assembly
Dash
3
• Insert and “snap” the key assembly into the opening
in the dash, as shown.
1
FRONT VIEW
• Position the dash on the vehicle.
• Make sure the motor harness connector wire is
through the groove in the dash.
• Insert five #10 x ¾" screws into the dash tabs
and tighten.
16
19
7
12
4
• Place a dash cap to the side of the dash.
• Insert three #10 x 3/4” screws and tighten.
• Repeat this procedure to assemble the other dash cap
to the dash.
19
13
2
DASH VIEW
• Place the labels exactly as shown in the illus-tration
and avoid repositioning a label once it has
been applied.
T6138pr-0920
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.