Fisher-Price T6137 User Manual
Owner's Manual
with Assembly Instructions
For Model T6137
Please read this manual and save
Please read this manual and save
•
it with your original sales receipt.
Tools needed for assembly: Phillips
•
screwdriver, adjustable wrench (or
pliers), safety scissors (not included).
Use only with the Power Wheels
•
®®
12 Volt Lead-Acid Rechargeable
Battery and
Power Wheels
12 Volt
Charger with Type 12V Connector
(both included).
•
it with your original sales receipt.
Tools needed for assembly: Phillips
•
screwdriver, adjustable wrench (or
pliers), safety scissors (not included).
Use only with the Power Wheels
•
12 Volt Lead-Acid Rechargeable
Battery and
Charger with Type 12V Connector
(both included).
Power Wheels®®
12 Volt
Owner's Manual
with Assembly Instructions
For Model T6137
IMPORTANT INFORMATION
ELECTRICAL HAZARD
DANGER
• To prevent electric shock, do not immerse in water; wipe clean with a damp cloth.
WARNING
Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. •
PREVENT FIRE•
- Never modify the electrical system. Alterations could cause a re resulting in
serious injury and could also ruin the electrical system.
- Use of the wrong type battery or charger could cause a re or explosion resulting
in serious injury.
- Use of Power Wheels® components in products other than Power Wheels®
vehicles could cause overheating, re or explosion.
The battery must be handled by adults only. The battery is heavy and contains •
sulfuric acid (electrolyte). Dropping the battery could result in serious injury.
Never allow children to charge the battery. Battery charging must be done by adults •
only. A child could be injured by the electricity involved in charging the battery.
Read the safety instructions on the battery. •
Examine the battery, charger and their connectors for excessive wear or damage •
each time you charge the battery. If damage or excessive wear is detected, do not
use the charger or the battery until you have replaced the worn or damaged part.
HOT• motors. Handle carefully.
RIDING HAZARD
WARNING
Prevent Injuries and Deaths•
Direct Adult Supervision Required.•
Never Ride at Night.•
Keep Children Within Safe Riding Areas. •
These areas must be:
Away from swimming pools and other bodies of water to prevent drownings. Generally level to prevent tipovers. Away from steps, steep inclines, cars, roads and alleys. -
Riding Rules •
Make sure children know and follow these rules for safe driving and riding.
Always sit on the seat. Always wear shoes. Only 2 (two) riders at a time. -
T6137pr-0920
2
IMPORTANT INFORMATION
Read this manual carefully for important safety •
information and operating instructions before using
your vehicle. Keep this manual for future reference,
as it contains important information.
The vehicle is designed for use on grass, asphalt, and •
other hard surfaces; on generally level terrain; and by
children 3 years of age and older. Do not exceed the
maximum weight capacity of 130 lbs (59 kg).
Your new vehicle requires adult assembly. Please set •
aside at least 60 minutes for assembly.
Use this vehicle • ONLY outdoors. Most interior fl ooring
can be damaged by riding this vehicle indoors.
Fisher-Price® will not be responsible for damage
to the fl oor if the vehicle is used indoors.
You must charge your battery for 18-30 hours • before
you use your vehicle for the fi rst time. We recommend
charging your battery before beginning assembly. Please
see the Battery Charging section for detailed instructions.
The battery charger is not a toy. •
Do not short circuit the battery.•
Adults Note: • Regularly examine the charger for damage
to the cord, plug, housing or other parts that may result
in the risk of fi re, electric shock or injury. In the event
of any damage, do not use the charger until the damage
has been properly repaired.
Your Power Wheels• ® 12 volt battery is equipped
with a built-in thermal fuse. The thermal fuse is
a self-resetting safety device which automatically “trips”
and shuts down operation of the vehicle if the vehicle is
overloaded or the driving conditions too severe. Once
a fuse has “tripped”, remove your foot from the pedal
and wait approximately 25 seconds before operating the
vehicle again. To avoid repeated automatic shut-downs,
avoid severe driving conditions.
If a thermal fuse in a battery continually trips under •
normal driving conditions, please contact your local
Power Wheels® Authorized Service Center.
To prevent damaging the motors and gears, teach your •
child to stop the vehicle before switching direction.
If you have any questions about your Power Wheels• ®
vehicle, please call our toll-free service lines at
1-800-348-0751. Trained customer service
representatives are available to take your call in English
or French. Habla Español? Si usted tiene alguna pregunta
ó necesita asistencia llame gratis 1-800-348-0755 para
los Estados Unidos. Tenemos representantes que hablan
español para atender su llamada.
For your convenience, Power Wheels• ® maintains an
independently owned and operated Authorized Service
Center Network with more than 300 authorized service
centers nationwide. Our authorized service centers
will repair or replace parts under warranty at no extra
charge, and can perform non-warranty repairs for
a minimal charge. To fi nd the authorized service
center nearest you, please visit us on-line at
www.powerwheels.com or call 1-800-348-0751.
Please visit us online to register your vehicle. •
3
T6137pr-0920
ASSEMBLED PARTS
If you experience a problem with this product, please call us at • 1-800-348-0751, rather than return this product
to a store.
Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no •
parts are discarded.
Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper •
towel to remove any excess lubricant.
Vehicle
Sport Bar
WindshieldDash
Hood
2 Sport Bar Supports Seat Backpack Backpack Holder
T6137pr-0920
4
ASSEMBLED PARTS
Steering Column
Steering Wheel
Steering Wheel Cap
Long Seat Belt Strap2 Short Seat Belt Straps Map ClipMap
2 Hood Latches Key AssemblySteering Column Cap
2 Light Covers
12 Volt Battery
12 Volt Charger
#8 x 5/8" Screw – 2
5
/32"x 11/2" Pin – 1
#8 Acorn Lock Nut – 2
Fasteners Shown Actual Size
For your convenience, we included an extra fastener!
Note: Tighten and loosen all screws with a Phillips
screwdriver. Do not over-tighten the screws.
#10 x 3/4" Screw – 18
5
T6137pr-0920
PARTS PICTURE
Note: Some parts shown are assembled on both sides of the vehicle. Fasteners not shown.
T6137pr-0920
6
BATTERY CHARGING
ELECTRICAL HAZARD
WARNING
Battery can fall out and injure •
a child if vehicle tips over.
Always use battery retainer.
PREVENT FIRE•
- Never modify the electrical system.
Alterations could cause a re
resulting in serious injury and could
also ruin the electrical system.
- Use of the wrong type battery
or charger could cause a re or
explosion resulting in serious injury.
- Use of Power Wheels® components
in products other than Power Wheels®
vehicles could cause overheating,
re or explosion.
The battery must be handled •
by adults only. The battery is
heavy and contains sulfuric acid
(electrolyte). Dropping the battery
could result in serious injury.
Never allow children to charge the •
battery. Battery charging must be
done by adults only. A child could
be injured by the electricity involved
in charging the battery.
Read the safety instructions on •
the battery.
Examine the battery, charger and •
their connectors for excessive wear
or damage each time you charge
the battery. If damage or excessive
wear is detected, do not use the
charger or the battery until you have
replaced the worn or damaged part.
CAUTION
Use the charger in dry locations only.
• Make sure you charge the battery for at least 18 hours
using the enclosed Power Wheels® 12 volt charger
before operating your vehicle for the first time. Charge
the battery for at least 14 hours after each use of the
vehicle. Never charge the battery longer than 30 hours.
Failure to follow these instructions may damage your
battery and will void your warranty.
• Use only a Power Wheels® 12 volt charger with “12V”
connector (input 120 VAC, 60Hz, with an output of 12
VDC) to charge your Power Wheels® 12 volt battery.
Battery must be upright while chargng
Charger
Connector
• Plug the charger connector into the battery socket.
• Plug the charger into a standard wall outlet.
Notes:
- If power flow to the wall outlet is controlled by
a switch, make sure the switch is “ON”.
- Use the charger only in a wall outlet. Do not plug the
charger into a ceiling outlet.
• Before charging the battery, examine the battery case
for cracks and other damage which may cause sulfuric
acid (electrolyte) to leak during the charging process.
If damage is detected, do not charge the battery or use
it in your vehicle. Battery acid is very corrosive and
can cause severe damage to surfaces it contacts.
• Do not place the battery on a surface (such as kitchen
counter tops) which could be damaged by the acid
contained inside the battery. Take precautions to
protect the surface on which you place your battery.
• Charge the battery in a well ventilated area.
• Once the battery is charged, disconnect the battery
connector from the charger connector. Unplug the
charger from the wall outlet. Refer to the Battery
Installation section for instructions on installing
your battery. If your battery is already installed in
your vehicle, simply re-connect the motor harness
connector to the battery.
• You do not need to remove the battery from your
vehicle to recharge it.
7
T6137pr-0920
Assembly
WARNING
Children can be harmed by small
parts, sharp edges and sharp points
in the vehicle’s unassembled state,
or by electrical items. Care should be
taken in unpacking and assembly of
the vehicle. Children should not handle
parts, including the battery, or help in
assembly of the vehicle.
#10 x 3/4" Screws
Dash
2
18
17
2
DASH VIEW
Before applying labels, wipe the surface of the vehicle •
with a clean, dry cloth to remove any dust or oils.
Place the labels exactly as shown in the illustration.•
For best results, avoid repositioning a label once it has •
been applied to the vehicle.
Key Assembly
Dash
Motor Harness
Connector Wire
1
FRONT VIEW
Position the dash on the vehicle.•
Make sure the motor harness connector wire is •
through the groove in the dash. Insert five #10 x ¾"
screws and tighten.
3
Insert and • “snap” the key assembly into the opening
in the dash, as shown.
T6137pr-0920
8
Loading...