Fisher-Price T5519 Instruction Sheet

BATTERY INSTALLATION

OFF

SALTY

Unscrew and lift cover away from top of Salty and Lighthouse.

Install batteries as indicated inside the battery compartment. For longer life use only alkaline batteries.

Requires 3 “AA” (LR6) batteries.

If this toy begins to operate erratically, you may need to reset the electronics. Remove the batteries from the toy and replace it.

BATTERY SAFETY INFORMATION

In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your toy (product). To avoid battery leakage:

• Non-rechargeable batteries are not to be recharged.

• Rechargeable batteries are to be removed from the product before being charged

(if designed to be removable).

• Rechargeable batteries are only to be charged under adult supervision

(if designed to be removable).

• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

• Do not mix old and new batteries.

• Only batteries of the same or equivalent type as recommended are to be used.

• Batteries are to be inserted with the correct polarity.

• Exhausted batteries are to be removed from the product.

• The supply terminals are not to be short-circuited.

• Dispose of battery(ies) safely.

• Do not dispose of this product in a fire. The batteries inside may explode or leak.

1,5V x 1

“AA” (LR6)

Phillips screwdriver (not included)

Required tool:

Salty

SALTY

INSTRUCTIONS

Please keep these instructions for future reference as they contain important information.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTE: Changes or modifications not expressively approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

• CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A LA NORME NMB-003 DU CANADA.

• Operation is subject to the following two conditions: (1) this device may not cause interference,

and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

• L’utilisation de ce produit est sujette aux conditions suivantes : (1) il ne doit pas produire de brouillage et

(2) il doit pouvoir tolérer tout brouillage reçu, même si ce brouillage est susceptible de compromettre son fonctionnement.

ID.T5519-0920-G2

Bridge Assembly

Based on the Railway Series by The Reverend W Awdry. © 2010 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited. © HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.

PRINTED IN CHINA.

Manufactured for Fisher-Price. ©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc., unless otherwise indicated. Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.

Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only).

T5519

CAUTION:

To prevent entanglement, keep hair away from wheels.

ADULT ASSEMBLY REQUIRED.

Lighthouse Assembly

Boathouse Assembly

TRACK LAYOUT

Center the boathouse between

the two track supports.

Track Riser (level 2)

Label Positions

Lift the crate on the boathouse to dump the cargo onto the flatbed.

3 3

5 5

NOTE: Adults should remove & discard rubber bands holding tracks together.

Lighthouse Battery Installation

1,5V x 2

“AA” (LR6)

Required tool:

Phillips screwdriver

(not included)

Push window to On

Press door to turn on light

6/9/10 Remark for G2

- Revised small riser placement

6/3/10 Remark for G1

- Revised track layout

- Added hair entrapment statement

Item No : T5519-0920-G2 Version : EL Size : 8.27" x 11.69" (A4) Paper : Woodfree paper 80 gsm Color : Black Date : June 9, 2010 (WC)