T5123
Assembled Parts
Assembly
Assembly
Lower Ramp
(with Gate)
Upper Ramp
2 Flags
Ramp Support
Sign
Lower Ramp
Base
1
Fit the tabs on the bottom of the lower •
ramp into the slots on the base. Push to
“snap” the ramp in place.
Fit the end of the gate onto the post on •
the base.
Ramp Support
Upper Ramp
Ramp Support
3
First, fit the posts on the bottom of the •
upper ramp into the holes in the ramp
support. Push to “snap” in place.
Holes
Tabs
Sign
5
Fit the tabs on the sign into the slots on •
the base. Push to “snap” in place.
Flags
Please keep this instruction sheet for future reference
as it contains important information.
Adult assembly is required.
Requires four “C” (LR14) alkaline batteries (not included) for operation.
Tool required for battery installation: Phillips screwdriver (not included).
www.fisher-price.com
Base
4
Then, fit the tabs on the end of the upper •
ramp into the slots on the base ramp.
Push to “snap” in place.
2
Fit the post on the ramp support into the •
socket in the base. Push to “snap” the
ramp support in place.
2 3
Hole
SIDE VIEW
6
Fit the flags into the sockets in front of •
the sign.
Push to • “snap” the flags in place.
Consumer Information
Battery
Battery Safety
Flashing Lights & Lively Music
1-800-432-5437 (US & Canada)
MER ASSISTANCE
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Care
Wipe this toy with a clean, damp cloth. •
Do not immerse.
This toy has no consumer serviceable •
parts. Do not take this toy apart.
ICES-003
This Class B digital apparatus complies •
with Canadian ICES-003.
Operation is subject to the following two •
conditions: (1) this device may not cause
harmful interference and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe •
B est conforme à la norme NMB-003
du Canada.
L’utilisation de ce dispositif est autorisée •
seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage
et (2) l’utilisateur du dispositif doit
être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage
est susceptible de compromettre le
fonctionnement du dispositif.
FCC Statement (United States Only)
This equipment has been tested and found
to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the •
equipment and receiver.
Consult the dealer or an experienced •
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Installation
1,5V x 4
"C" (LR14)
Locate the battery compartment on the •
bottom of the toy.
Loosen the screws in the battery •
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
Insert four, new “C” (LR14) •
alkaline batteries.
Hint: We recommend alkaline batteries for
longer battery life.
Replace the battery compartment door •
and tighten the screws.
If this product begins to operate •
erratically, you may need to reset the
electronics. Slide the power/volume
switch off and then back on.
When sounds from this toy become faint •
or stop, it’s time for an adult to change
the batteries.
Protect the environment by not •
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
Information
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid
battery leakage:
Do not mix old and new batteries or •
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
Insert batteries as indicated inside the •
battery compartment.
Remove batteries during long periods •
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
Never short-circuit the battery terminals.•
Use only batteries of the same or •
equivalent type, as recommended.
Do not charge non-rechargeable batteries.•
Remove rechargeable batteries from the •
product before charging.
If removable, rechargeable batteries are •
used, they are only to be charged under
adult supervision.
Power/Volume
Switch
Gearshift
Slide the power/volume switch to ON with low volume •
or ON with high volume .
Push the gearshift to start the track.•
Send the vehicles down the ramp and watch them spin •
around and zoom out the gate!
When you are finished playing with this toy, slide the •
power/volume switch OFF .
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. T5123b-0920
©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
4 5 6