Fisher-Price T3857 User Manual
P
HYSICAL LEARNING ARCADE
S
YS
T3857
TEM
Please keep this owner's manual for future reference, as it contains important information.
Requires four “D” (LR20) alkaline batteries (not included) for operation.
Age: 3-6 years
This product is intended for indoor use only.
Use ONLY alkaline batteries for longest battery life.
www.fi sher-price.com
Get up. Get smart. Get going!
It’s a stationary bike, a learning center, and an arcade game
system – all rolled into one! Smart Cycle® plugs right into
your TV, ready to take kids on learning adventures like no
other. As they pedal, favorite character friends guide them
through learning discoveries, games, and even exciting races.
Drive
Pedal, steer and learn at your own
pace – visit Math Mountain, Shape Lake,
Number Fields, Letter Creek and other
stops along the way.
Learn
Stop and rest, but don’t stop
learning! Use the joystick to reinforce important learning skills with
plenty of games and activities – with
different levels for growing kids.
Race
Put the pedal to the metal as you
race with cars on-screen, against
the clock, or with another player!
Safety Tips
• Always sit on the seat.
• Always wear shoes.
• Only one (1) rider at a time.
2
Parts
Handlebar
Frame
with Console
Seat
Learning Adventure
Game Cartridge
with Key Ring
Seat Post
Pedal Assembly
Plug-and-Play Cord
Adult assembly is required. Tool needed for assembly:
Phillips screwdriver (not included).
Front Base
(Small)
Back Base
(Large)
Frame Cover (with Bolt)
#8 x 1,25" Screw - 14
Shown Actual Size
Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten screws.
3
Assembly
CAUTION
This product contains
small parts in its
unassembled state. Adult
assembly is required.
Pedal
Assembly
Frame
1
Fit the pedal assembly into the groove in •
the underside of the frame, as shown.
Hint: The pedal assembly is designed to
only fi t one way. If it does not seem to fi t,
turn it around and try again.
Insert four screws into the pedal assembly. •
Fully tighten the screws.
Front Base
(Small)
2
Fit the front base (small) onto the bottom •
of the frame, as shown.
Hint: The front base is designed to fi t onto
the frame one way. If it does not seem to fi t,
turn it around and try again.
Insert four screws into the front base •
and tighten.
Seat Post
Rear Base
(Large)
3
Fit the rear base (large) onto the end of the •
seat post, as shown.
Hint: The rear base is designed to fi t onto
the seat post one way. If it does not seem to
fi t, turn it around and try again.
Insert two screws into the rear base •
and tighten.
4
Assembly
4
Turn both the frame and seat post •
assemblies upright.
Fit the seat post assembly onto the •
frame assembly.
Insert two screws into the seat post •
and tighten.
Hint: You may want to insert the frame
cover with bolt into the frame assembly
before inserting and tightening screws in
the post.
Frame Cover
(with Bolt)
Handlebar
6
Fit the handlebar onto the frame, •
as shown.
Hint: The handlebar will only fi t one way
onto the console. If it does not seem to fi t,
turn it around and try again!
Insert two screws into the handlebar •
and tighten.
Pull up on the handlebar to be sure it •
is secure.
5
Insert the frame cover with bolt into the •
hole on the side of the frame assembly.
Fully tighten the bolt.•
5
Seat
Assembly
7
At an angle, fi t the upper tabs on the front •
of the seat into the slots on the seat post.
Lower the seat to fi t the bottom tabs on •
the seat into the slots on the seat post.
You should hear a "click".
Push down on the seat to be sure it •
is secure.
Seat Height 3
(Shortest)
Seat Height 2
Seat Height 1
(Tallest)
8
For your child's comfort, the seat can •
be adjusted to any of three seat heights
(upper slots for shorter children and lower
slots for taller children).
To remove the seat, press the tabs •
underneath and lift.
Replace the seat at the desired height and •
push down on the seat to be sure it is
secure in the slots in the seat post.
6
Loading...