T2457
T2457
Please keep this instruction sheet for future reference,
as it contains important information.
Requires two “AA” batteries (included) for operation.
Adult assembly is required for battery replacement.
Tool required for battery replacement: Phillips screwdriver (not included).
www.fisher-price.com
Battery Replacement Battery Safety
1,5V x 2
“AA” (LR6)
For best performance, we recommend
replacing the batteries that came with
this toy with two, new “AA” (LR6)
alkaline batteries.
Locate the battery compartment on the •
back of the robot.
Loosen the screw in the battery •
compartment door and remove the door.
Remove the exhausted batteries and •
throw them away.
Insert two, new “AA” (LR6) •
alkaline batteries.
Hint: We recommend alkaline batteries for
longer battery life.
Replace the battery compartment door •
and tighten the screw.
If this product begins to operate erratically, •
you may need to reset the electronics.
Slide the power switch off then back on.
When sounds or lights from this toy •
become faint or stop, it’s time for an adult
to change the batteries.
Protect the environment by not •
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
Information
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
Do not mix old and new batteries or •
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
Insert batteries as indicated inside the •
battery compartment.
Remove batteries during long periods •
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
Never short-circuit the battery terminals.•
Use only batteries of the same or •
equivalent type, as recommended.
Do not charge non-rechargeable batteries.•
Remove rechargeable batteries from the •
product before charging.
If removable, rechargeable batteries are •
used, they are only to be charged under
adult supervision
Slide the power switch on the bottom of •
the robot ON .
Place the robot inside the headquarters. •
Robot Police on Patrol!
Turn a figure at the bottom of the •
headquarters to release the robot!
Then, close and lower the gates. •
Turn a figure on top of the headquarters •
to open the gates and hear siren sounds.
Press the button on top of the robot for •
lights, sound effects and motion!
Slide the robot for more exciting sounds •
or change the robot’s arms for even
more action!
Press the button on the launcher to fire at •
the enemy!
Do not aim at eyes or face. Only use •
projectiles supplied with this toy. Do not
fire at point blank range
When you are finished playing with this •
toy, slide the power switch OFF .
CONS
ASSISTANC
Consumer Information
UMER
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Care
Wipe this toy with a clean cloth dampened •
with a mild soap and water solution.
Do not immerse this toy.
This toy has no consumer serviceable •
parts. Do not take this toy apart.
ICES-003
This Class B digital apparatus complies •
with Canadian ICES-003.
Operation is subject to the following two •
conditions: (1) this device may not cause
harmful interference and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe B est •
conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée •
seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement
du dispositif.
FCC Statement (United States Only)
E
This equipment has been tested and found
to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the •
equipment and receiver.
Consult the dealer or an experienced •
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2010 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA T2457pr-0920
Loading...