Fisher-Price R8637 User Manual

www.fisher-price.com
R8637
R8637
Track not included and sold separately.
Please keep this instruction sheet for future reference, as it contains important information. Requires six “AAA” (LR03) alkaline batteries (not included) for operation. Adult assembly is required for battery installation. Tool required for battery installation: Phillips screwdriver (not included).
Battery Installation
1.5V x 6
“AAA” (LR03)
We recommend the use of alkaline
batteries for longer battery life.
Vehicle
• Locate the battery compartment on the back of the vehicle.
• Loosen the screws in the battery compartment door with a Phillips screwdriver. Lift the battery compartment door and insert three “AAA” (LR03) alkaline batteries.
• Close the battery compartment door and tighten the screws with a Phillips screwdriver. Do not over-tighten.
• If the vehicle begins to operate erratically, you may need to reset the electronics.
Remove the batteries and replace them in the vehicle.
IMPORTANT! Under normal use conditions, the batteries in the vehicle will require replacement more often than the batteries in the remote controller. For additional information, see the troubleshooting section.
Remote Controller
• Locate the battery compartment on the bottom of the remote controller.
• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door and insert three “AAA” (LR03) alkaline batteries.
• Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten.
• If the remote controller begins to operate erratically, you may need to reset the electronics. Remove the batteries and replace them in the remote controller.
• Protect the environment by not disposing of this product with (2002/96/EC). Check (Europe only).
your local authority for recycling advice and facilities
household waste
Loading...
+ 4 hidden pages