Fisher-Price P5748 User Manual

P5748

IMPORTANT!

KEEP INSTRUCTIONS FOR

FUTURE REFERENCE.

www.fisher-price.com.au

Consumer Information

WARNING

Prevent serious injury or death from falls or
sliding out:

• Always use the restraint system for the
upright and reclined positions of the seat.
Adjust restraint to fit your child snugly.
The tray is not designed to hold the child
in the chair.

• It is recommended that only children
capable of sitting upright unassisted use
the upright position of the high chair.

• Position the high chair away from steps,
hot surfaces, electrical cords and other
items that may cause injury to the child.

• Always keep child in view while in
high chair.

• Never leave child unattended.

• Follow the manufacturer’s instructions.

CAUTION

This package contains small parts

in its unassembled state.

Adult assembly is required.

IMPORTANT! Please keep these instructions for future reference.

Please read these instructions before assembly and use of •
this product.

Adult assembly is required. Tool needed for assembly: •
Allen wrench (included).

Product features and decorations may vary from photographs. •

2

Parts

Food Tray Snack Tray

2 Front Legs 2 Back Legs

Footrest

Seat Back with Shoulder

and Waist Belts

Seat Bottom with

Crotch Belt

Back Base

Front Base

M4 x 17mm Screw – 6

Seat Pad

M5 x 59,5mm Screw – 6 M6 x 28mm Screw – 10

All Fasteners Shown Actual Size

Tighten the screws with the enclosed Allen wrench.

2 Seat Brackets

Allen Wrench

3

Assembly

IMPORTANT! Before assembly and each use, inspect this product

for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use if any parts are missing or broken. Contact Fisher-Price®
for replacement parts and instructions if needed. Never substitute parts.

Back Leg

Seat Bottom

Large Socket

Back Leg

1

Turn the seat bottom upside down on a flat surface. •
Position a back leg so that it curves up and fit it into a large •

socket in the seat bottom.

Hint: If the leg does not seem to fit into the seat bottom socket,
try the other back leg.

PUSH

M5 x 59,5mm

Screw

3

Fit the other back leg into the large socket in the seat bottom.•

PUSH

M5 x 59,5mm

Screw

2

Insert an M5 x 59,5mm screw into the side of the seat bottom •
and tighten.

Push the back leg until it• "snaps" in place.

4

Insert an M5 x 59,5mm screw into the side of the seat bottom •
and tighten.

Push the back leg until it • "snaps" in place.

4

Assembly

Front Leg

Small Socket

5 7

Front Leg

Seat Bottom

Position a front leg so that it curves up and fit it into the small •
socket in the seat bottom.

Hint: If the leg does not seem to fit into the seat bottom, try the
other front leg.

M5 x 59,5mm

Screws

Fit the other front leg into the small socket in the seat bottom. •

M5 x 59,5mm

Screws

6

Insert two M5 x 59,5mm screws into the other side of the seat •
bottom and tighten.

8

Insert two M5 x 59,5mm screws into the side of the seat bottom •
and tighten.

5