Page 1
P5331
1
www.fisher-price.com
Page 2
Consumer
Information
WARNING
To prevent entanglement
injury, never place gym in
a crib or playpen.
Never add strings, ties or
other products to the gym.
Parts
2 Tubes
2 Supports
• Please keep this instruction sheet for
future reference, as it contains
important information.
• Adult assembly is required.
• No tools required for assembly.
2 Hanging Toys Inflatable Ball
Quilt
2
Page 3
Straps
Overhead Gym
Support
Straps
Tubes
Straps
2
Slots
1
• Place the quilt, print side up, on a
flat surface.
• Fit the "T" end of each strap on the quilt
through the slots in the supports. Pull up
on the quilt to be sure it is secure.
Supports
Quilt
• Locate both straps on the bottom of one
of the tubes.
• Fit the ends of each strap into the
support post.
• Turn the support over and fasten
the straps.
• Repeat this procedure to attach the
remaining tube ends to the supports.
3
Page 4
3
• Squeeze the stem to inflate the ball.
• Fasten the toys and inflatable ball to the
straps on the arches.
Convert for
Tummy-Time Play
• Remove the toys and inflatable ball from
the straps on the arches.
• Place the toys on the quilt for baby.
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. P5331pr-0920
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
4
Page 5
Crawl-Through Fun
Straps
Sleeve
Tube
1
• Slide each tube through the sleeve in each
side of the quilt.
Support
2
• Position the supports so the slots are
facing inward.
• Locate both straps on the bottom of one
of the tubes.
• Fit the ends of each strap into the
support post.
• Turn the support over and fasten
the straps.
• Repeat this procedure to attach the
remaining tube ends to the supports.
Post
5
Page 6
3
• Fit the plastic tabs on each end of the
quilt into the slots in the supports.
Care
• Machine wash the play quilt in cold water
on the gentle cycle. Do not use bleach.
Tumble dry on low heat.
• Surface wash the tubes, toys, ball and
supports with a mild cleaning solution
and damp cloth. Do not use bleach.
Rinse clean to remove residue.
4
•
Attach the toys and the ball to the fasteners
on the sleeves.
6
Loading...