Product may appear different than the one shown in these instructions.
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required for battery replacement.
Requires three "AAA" batteries (included) for operation.
Tool required for battery replacement:
Phillips screwdriver (not included).
Wipe with a clean cloth dampened with a mild soap
and water solution. Do not immerse.
www.fisher-price.com
TM
Before First Use
CAUTION
Please keep small parts such as the plastic tab out of
children’s reach. Throw the plastic tab away.
Note: A plastic tab was attached to the toy for in-store demonstration purposes. While the
tab may have already been removed, check the back of the toy to be sure. If the plastic tab
is still attached, open the fasteners on the back of the toy and pull to remove the tab. Close
the fasteners and throw the plastic tab away.
Battery Replacement
For best performance, we recommend that you replace batteries that came with this toy
with three, new "AAA" (LR03) alkaline batteries.
• Open the fasteners on the back of the toy.
• Rotate the sound box out of the toy to access the battery compartment.
• Loosen the screw in the battery compartment door. Remove the battery compartment door.
Remove the exhausted batteries and throw them away.
• Insert three, new "AAA" (LR03) alkaline batteries.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw.
• Fit the sound box back into the toy and close the fasteners.
• If this toy begins to operate erratically, you may need to reset the electronics. Slide the
power switch off and then back on.
• When sounds become faint or stop, it’s time for an adult to change the batteries!
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities (Europe only).
1.5V x 3
"AAA" (LR03)