P2172
Please keep this instruction sheet for future reference,
as it contains important information.
PRINTED IN CHINA P2172pr-0920
Fisher-Price, Inc., a subsidiary of Mattel, Inc.,
East Aurora, New York 14052, U.S.A.
©2008 Mattel, Inc. All Rights Reserved. ® and ™
designate U.S. trademarks of Mattel, Inc.
WARNING
CHOKING HAZARD – Small Parts
Not suitable for children
under 3 years.
Please keep this instruction sheet for future reference,
as it contains important information.
6 Peel & Stick Gems
70 Beads
6 Color Me Gemz™ Pens
2 Necklace Strings
3 Gem Pendants
17 Gem Charms
3 Bracelet Strings
IMPORTANT! The ink in Color Me Gemz™ pens is
intended to be permanent and will stain fabrics,
carpet, clothing, walls and furniture. Cover all work
surfaces BEFORE coloring gems. Adult supervision is
recommended.
• To remove markings from skin, use soap
and water.
• For best results, use only the Color Me Gemz™
pens to decorate the gems.
• Color the facets only on the peel & stick gems,
pendants and charms. Do not color the beads.
• Replace the caps on Color Me Gemz™ pens after
each use.
Place newspaper or another protective material
on your work surface.
Fisher-Price, Inc., a subsidiary of Mattel, Inc.,
East Aurora, New York 14052, U.S.A.
©2008 Mattel, Inc. All Rights Reserved. ® and ™
designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA P2172pr-0920
2. Peel the backing from the gem.
Dispose of the backing in the garbage.
Press the gem onto a notebook
(notebook not included). Create your
own cool design! For best results,
do not remove the gem after it has
been applied.
4. Slide the photo into the slot in
the top of the gem charm.
6. Wrap the necklace around
your neck and insert the
narrow pin into the barrel.
8. When fi nished, be sure to
replace the cap on each
Color Me Gemz™ pen.
1. Use the tip of the Color Me Gemz™
pen to color the facets on a peel &
stick gem, pendant or charm. For
best results, only color the faceted
areas on each gem.
Photo not included.
3. You can place your favorite
photo in the gem charm.
Cut the photo to approximately
5/8” x 7/8” (rectangle).
5. Slide the necklace
string through the
opening on the charm,
pendant or bead.
7. Wrap the bracelet
around your wrist
and fi t the bar
through the ring.