Fisher-Price N9316 Instruction Sheet

Please keep this instruction sheet for future
reference, as it contains important information.

Requires three “AAA”batteries (included).

Adult assembly is required for
battery replacement.

Tool required for battery
replacement: Phillips
screwdriver (not included).

N9316

www.fisher-price.com

Consumer Information

Note: A plastic tab is attached to the toy for in-store

demonstration purposes. While the tab may have
already been removed, check the toy to be sure.
Open the fasteners on the back of the toy. Pull and
remove the plastic tab from the toy. Throw the plastic
tab away.

FCC Statement (United States Only)

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment
and receiver.

• Consult the dealer or an experienced radio/TV
technician for help.

Note: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to operate
the equipment.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.

2

Battery Replacement

Battery Safety Information

1.5V x 3

“AAA” (LR03)

Battery

Compartment

Door

For best performance, we recommend replacing
the batteries that came with this toy with three,
new “AAA” (LR03) alkaline batteries.

• Open the fasteners on the back of the toy.

• Locate the battery compartment inside.

• Loosen the screw in the battery compartment door
with a Phillips screwdriver. Remove the battery
compartment door. Remove the worn batteries
and throw them away.

• Insert three “AAA” (LR03) alkaline batteries.

Hint: We recommend using alkaline batteries for
longer battery life.

• Replace the battery compartment door and tighten
the screw. Close the fasteners.

• When sounds from this toy become faint or stop, it’s
time for an adult to change the batteries!

• Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority for
recycling advice and facilities (Europe only).

Power/
Volume

Switch

In exceptional circumstances, batteries may leak
fluids that can cause a chemical burn injury or ruin
your product. To avoid battery leakage:

• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).

• Insert batteries as indicated inside the battery
compartment.

• Remove batteries during long periods of non­use. Always remove exhausted batteries from the
product. Dispose of batteries safely. Do not dispose
of this product in a fire. The batteries inside may
explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or equivalent type,
as recommended.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the product
before charging.

• If removable, rechargeable batteries are used, they
are only to be charged under adult supervision.

Care

• Wipe this toy with a clean cloth dampened with
a mild soap and water solution. Do not immerse
this toy.

• This toy has no consumer serviceable parts. Do not
take this toy apart.

3

3 Fun Songs - You Can Sing Along!

Bunny Song

How about a bunny hug

From someone soft and sweet

With silky ears, a fuzzy tail
And great big bumpy feet!

Counting Song

1-2-3-4-5

6-7-8-9-10

Come and count along with me

We'll start with 1 2 3! Wee!

Hopping Song

Oh, I like to walk

And I like to skip

And I even like to run

Of all the different ways to move

Here's my favorite one

Hopping here

Hopping, hopping everywhere

Oh, I love to hop the whole day long

And sing my hopping song!

Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. N9316pr-0920
©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA

Hopping there

3 Ways to Play and Learn -

On/Off

Mode Select

• Open the fasteners on the back of the toy to locate
the power/volume switch. Slide the switch to on
with low volume

• Locate the on/off switch on the bunny's left foot.
Press once to turn the bunny on. Press again to
turn off.

• Locate the mode select switch on the bunny's right
foot. Press to change modes from learning time

to music time

• If the toy begins to operate erratically you may
need to reset the electronics. Slide the power/
volume switch on the back of the toy off and
then back on.

or on with high volume .

or to imagination .

PRESS

Learning Time,

Music Time, and

Imagination!

Learning Time - Press the bunny's
hand to count along to a song. Press the
tummy to learn opposites.

Hint: If you'd like your child to play with this
toy without sounds simply slide the power/
volume switch on the back of the toy off .

5 6

Mode SelectMode Select

On/OffOn/Off

Music Time - Press the bunny's hand
or tummy and sing along.

Imagination - Press the bunny's hand
for a song or press the tummy for playful
phrases. Tip the bunny upside down. The
bunny knows whether it's up or down.

PRESS