Fisher-Price N8849 User Manual

N8849

Please keep this instruction sheet for future reference,

Requires four “D” (LR20) alkaline batteries for mobile

operation and two "AAA" (LR03) alkaline batteries for

Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).

as it contains important information.

remote operation (batteries not included).

www.fisher-price.com

1

Consumer Information

WARNING

Prevent Entanglement Injury

• Keep out of baby’s reach.

• Remove mobile portion of product from crib or playpen when baby
begins to push up on hands and knees.

• This product may not attach to all crib designs. Do not add additional
strings or straps to attach to crib or playpen.

• The mobile portion of this product may be used from birth until 5 months.

• The base portion of this product may be used from birth until 36 months.

• A crib mobile is intended for visual stimulation and is not to be grasped by a child.

• Always attach with all provided fasteners tightly to a crib or playpen according to the instructions.
Check frequently.

• Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not immerse
this toy. The soft toys are surface washable.

• This toy has no consumer serviceable parts. Do not take this toy apart.

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury
or ruin your product. To avoid battery leakage:

• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).

• Insert batteries as indicated inside the battery compartment.

• Remove batteries during long periods of non-use. Always remove exhausted batteries from the
product. Dispose of batteries safely. Do not dispose of product in a fire. The batteries inside may
explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or equivalent type, as recommended.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the product before charging.

• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

2

Parts

Arm

Crib Adaptor

Canopy

4 Soft Toys

Remote Retainer

Note: All of the screws used to assemble this toy are attached to the product.

Follow these instructions carefully to fully secure the screws. Tighten and

loosen all screws with a Phillips screwdriver. Do not over-tighten the screws.

Base

(2 Pieces)

3

Battery Installation

1.5V x 4

“D” (LR20)

We recommend using alkaline
batteries for longer battery life.

Mobile Base

• Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the
battery compartment door.

• Insert four “D” (LR20) alkaline batteries.

• Replace the battery compartment door and tighten the screws.

IMPORTANT! Under normal use conditions, the batteries in the mobile base will require replacement
more often than the batteries in the remote. When sounds or lights become faint or stop, it’s time
for an adult to change the batteries.

1.5V x 2

"AAA" (LR03)

We recommend using alkaline
batteries for longer battery life.

Remote

• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery
compartment door.

• Insert two "AAA" (LR03) alkaline batteries.

• Replace the battery compartment door and tighten the screw.

• If this product begins to operate erratically, you may need to reset the electronics. Slide the power/
volume switch on the mobile base off and then back on. Remove the batteries from the remote and
replace them.

• Protect the environment by not disposing of this product with household waste (2002/96/EC).
Check your local authority for recycling advice and facilities (Europe only).

4