Please remove everything from the package and compare to the contents shown on page 4.
If any items are missing, please call 1-800-524-8697.
Keep these instructions for future reference as they contain important information.
8+
N6891-0920
DANGER – To prevent electric shock, do not immerse in water; wipe clean with damp cloth.
Electrical rating (Input: AC 120V 60 Hz; Output: DC 24V 0.5A)
Mattel, Inc.
N6891
Immersing this toy can result in an electric shock.
Adults Note: Adult supervision required. Periodically examine this product for damage to the cord, housing or
other parts that may result in the risk of fire, electric shock or injury. If the product is damaged, do not use it.
This power unit is intended to be correctly orientated in a vertical or floor mount position.
CAUTION – ELECTRIC – OPERATED PRODUCT – Not recommended for children under 8 years of age. As
with all electrical products, precautions should be observed during handling and use to reduce the risk
of electric shock.
If the printer experiences a loss of function or decrease in performance, reset the printer by holding down the
power button for three seconds. Wait a few seconds, and press the power button again to turn it on.
WARNING FOR PRE-PRINT COAT, TOP COAT AND WHITE POLISH: Flammable. Keep away from heat and
flame. Avoid contact with eyes.
Nail Ink, TOP COAT, PRE-PRINT COAT and WHITE POLISH containers in this product have been sealed with tamperevident seals. If a seal is broken, do not use this product and call 1-800-524-8697 for a replacement. These items
may stain fabrics and other surfaces. Avoid contact with carpet, clothing, walls and furniture.
Always use nail polish in a well ventilated area.
DOLL’D UP NAILS™ CUSTOMER SUPPORT
For questions about Doll’d up nails™, call:
US and Canada: service.mattel.com or call 877 3BARBIE (877-322-7243), M-F 9am - 7pm, Sat 11am - 5pm, Eastern
Time.
UK: service.mattel.com/uk or Call 01628 500303, M-F 9am - 5pm
Australia: 1300 135 312 or 1800 674 753 M-F 8am - 4:30pm, EST.
New Zealand: 0800 174 063 M-F 10am - 6:30pm, Australia EST.
Z102
N83
© 2009 Mattel, Inc., All Rights Reserved.
Macromedia is a trademark of Adobe Systems Incorporated. Pentium is a trademark or registered trademark of
Intel Corporation or its subsidiaries in the United States and other countries.
CONSUMER INFORMATION
Need Assistance? Visit service.mattel.com or call 1-800-524-8697
(US and Canada only), M-F 9AM - 7PM & SAT 11AM - 5PM, Eastern.
SERVICE.MATTEL.COM
Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
2
Mattel Canada Inc., Mississauga, Ontario L5R 3W2. You
may call us free at 1-800-524-8697.
Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6
4UB. Helpline 01628 500303.
Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.
Consumer Advisory Service - 1300 135 312.
Mattel East Asia Ltd., Room 1106, South Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China.
Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran
Tropicana Golf Country Resort, 47410 PJ. Tel:03-78803817,
Fax:03-78803867.
Mattel, Inc. 636 Girard Avenue, East Aurora NY 14052.
U.S.A. Consumer Relations 1 (800) 524-8697.
Table of Contents
What’s in the Box .................................................................................................4
Introduction ..........................................................................................................5
System Requirements ......................................................................................... 5
Installation of Software ......................................................................................6
Installation of ink cartridge ..............................................................................6
Connect ................................................................................................................7
Alignment of Camera and Printer ..................................................................8
Interface Overview .............................................................................................9
Design & Print .................................................................................................... 10
Favorite Designs ............................................................................................... 12
Import Your Own Images ............................................................................... 13
Helpful Tips..........................................................................................................14
Refill Orders ........................................................................................................14
Settings ............................................................................................................... 15
Maintenance .....................................................................................................16
Cleaning the Finger Holder .................................................................................. 16
Changing the Ink Cartridge .................................................................................16
How Much Ink Do I Have Left? .............................................................................16
What Do the Lights Mean? .................................................................................... 16
Troubleshooting .................................................................................................17
3
Quick Start Guide
Manual
©
2
0
0
8
M
a
t
t
e
l
,
I
n
c
.
A
l
l
R
i
g
h
t
s
R
e
s
e
r
v
e
d
.
DIGITALNAILPRINTERFORYOU
What’s in the Box
Printer
Power adapter
White Polish
CD-ROM
USB cable
Pre-print Coat Top Coat
Printer
Quick Start guide Instruction manual
alignment
card
Ink Cartridge inside
foil pouch
4
Lid
Introduction
On/Off
Finger Slot
Camera/Print Button
USB port
Power
System Requirements
•PC (Windows XP and Vista only)
•Pentium III 800 MHz or above (Intel Core 1.8 GHz or above recommended)
•512 MB of RAM (1GB of RAM or above recommended)
•Screen resolution 1024 x 768
•800 MB free hard drive space
•Direct X 9.0 or above
•USB 2.0
•Internet Explorer 6.0 or later with SP1 and Macromedia Flash Plug In.
•Internet Connection recommended (Internet connection required for updates only.)
5
Installation
1
Software
IMPORTANT NOTE: Install the software
before connecting the printer to your
computer.
1. Insert the CD-ROM into your CD drive to
launch the installer. (If it doesn’t launch
automatically, double-click “My Computer”
on your Desktop, then double-click on the
CD drive.) Double click “setup.exe.”
2. Follow the on screen prompts to install
the software.
3. After the software is installed, connect
the power cord.
2
Ink Cartridge
Remove the printhead from the
foil package, as shown here.
Remove the tape. Do not touch
the contacts.
Any other printers you have
can stay connected.
1. Open top lid, allow a few seconds for the ink cartridge carrier to move to the
right and then open the lid.
2. Insert nail ink cartridge.
3. Close the ink cartridge carrier.
4. Close the top lid.
2 3 41
6