Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “C” (LR14) alkaline batteries (not included).
Adult assembly is required.
Tool required for assembly: Phillips screwdriver
(not included).
N3570
On, off
Open
close!
www.fisher-price.com
Kitchen Light
Rug
Parts
Arch
Refrigerator
Oven Door
2 Oven Walls
Toaster
Countertop
Oven Rack
Stove Knob
Oven Base
Shape Sorter
Faucet
Sink Base
Pipe
Handle
#6 x 1" (2.5 cm) Screw – 12
Shown Actual Size
Flower
Parts not shown: 2 Balls, 3 Shape Blocks
Spoon
Pan
Note: Tighten or loosen all screws
with a Phillips screwdriver.
Do not over-tighten the screws.
2
CAUTION
This product contains small parts for
assembly by an adult. Take extra care
during unpacking and assembly.
Oven Wall
Assembly
Posts
Oven Wall
Countertop
1
• Fit the tabs on the oven walls into the slots in the countertop.
Oven Rack
1
3
• Turn the oven door upright (detail side up) and fit the pegs into
the posts on each side of the oven.
Hint: The oven door is designed to fit one way. If it does not fit,
turn the oven door over and try again.
Oven Door
Oven Base
Sink Base
2
• Turn the oven rack upside-down (detail side down) and fit it into
the groove in each oven wall.
Hint: The oven rack is designed to fit one way. If it does not fit, turn
the oven rack over and try again.
Grooves
4
• Fit the tabs on the oven base into the slots in the sink base.
• Insert two screws into the oven base and tighten.
3