Fisher-Price N1128 User Manual

N1128N1128

WARNING

CHOKING HAZARD – Small Parts

Not suitable for children

under 3 years.

Please keep this instruction sheet for future reference, Please keep this instruction sheet for future reference,

as it contains important information.as it contains important information.

2 Interchangeable

Gem Buckles

Woven Belt

2 Gem Belt Sliders

2 Color Me Gemz™ Pens

IMPORTANT! The ink in Color Me Gemz™ pens is

intended to be permanent and will stain fabrics, carpet, clothing, walls and furniture. Cover all work surfaces BEFORE coloring the gem sliders and buckles. Adult supervision is recommended.

• To remove markings from skin, use soap and water.

• For best results, use only the Color Me Gemz™ pens to decorate the buckles and sliders.

• The belt is surface wash only. Wipe with a clean, damp cloth.

• Replace the caps on Color Me Gemz™ pens after each use.

• Place newspaper or another protective material on your work surface.

Fisher-Price, Inc., a subsidiary of Mattel, Inc.,Fisher-Price, Inc., a subsidiary of Mattel, Inc.,

East Aurora, New York 14052, U.S.A.East Aurora, New York 14052, U.S.A.

designate U.S. trademarks of Mattel, Inc.designate U.S. trademarks of Mattel, Inc.

PRINTED IN CHINA N1128pr-0920PRINTED IN CHINA N1128pr-0920

1. Use the tip of the Color Me Gemz™

pen to color the facets on a gem slider or buckle. For best results, only color the faceted areas on each gem.

2. Fit the end of the belt through the

slot on the back of each slider.

3. Wrap the belt around your waist.

Fit the end of the belt through the slot in the buckle base. Lower the top of the buckle to fasten the belt in place.

4. Fit the pegs on the back of a

buckle into the wider end of each slot in the buckle base.

5. Turn the buckle to lock in place! If

you’d like to remove the buckle, simply turn and lift the buckle from the base.

6. When ﬁ nished, be sure to

replace the cap on each Color Me Gemz™ pen.