Fisher-Price N1128 Instruction Sheet

N1128N1128

Please keep this instruction sheet for future reference, Please keep this instruction sheet for future reference,

as it contains important information.as it contains important information.

2 Interchangeable

Gem Buckles

Woven Belt

2 Gem Belt Sliders

2 Color Me Gemz™ Pens

IMPORTANT! Adult supervision is recommended.

The ink in Color Me Gemz™ pens is intended to be
permanent and will stain fabrics, carpet, clothing,
walls and furniture. Cover all work surfaces BEFORE
coloring gems. Some markings may be removed on
surfaces using an alcohol-based hand sanitizer.
We recommend that an adult apply a small amount
of hand sanitizer to a paper towel, tissue or cotton
swab and then wipe the stain. Be sure to test the use
of hand sanitizer in an inconspicuous area fi rst.

• Color ONLY the facets on the gems. To remove
markings from an unintended area on a gem, we
recommend that an adult apply a small amount of
an alcohol-based hand sanitizer to a paper towel,
tissue or cotton swab and wipe the marking.

• To remove markings from skin, use soap
and water.

• For best results, use only the Color Me Gemz™
pens to decorate the buckles and sliders.

• The belt is surface wash only. Wipe with a clean,
damp cloth.

• Replace the caps on Color Me Gemz™ pens after
each use.

WARNING

CHOKING HAZARD – Small Parts

Not suitable for children

under 3 years.

• Place newspaper or another protective material
on your work surface.

Fisher-Price, Inc., a subsidiary of Mattel, Inc.,Fisher-Price, Inc., a subsidiary of Mattel, Inc.,

East Aurora, New York 14052, U.S.A.East Aurora, New York 14052, U.S.A.

©2008 Mattel, Inc. All Rights Reser ved. ® and ™©2008 Mattel, Inc. All Rights Reserved. ® and ™

designate U.S. trademarks of Mattel, Inc.designate U.S. trademarks of Mattel, Inc.

1. Use the tip of the Color Me Gemz™

pen to color the facets on a gem slider
or buckle.

PRINTED IN CHINA N1128a-0920PRINTED IN CHINA N1128a-0920

2. Fit the end of the belt through the

slot on the back of each slider.

3. Wrap the belt around your waist.

Fit the end of the belt through the
slot in the buckle base. Lower the
top of the buckle to fasten the
belt in place.

4. Fit the pegs on the back of a

buckle into the wider end of
each slot in the buckle base.

5. Turn the buckle to lock in place! If

you’d like to remove the buckle,
simply turn and lift the buckle
from the base.

6. When fi nished, be sure to

replace the cap on each
Color Me Gemz™ pen.