Page 1
N1069
J0126
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “AA” batteries for operation (included).
An adult must attach toy to a crib and replace batteries.
Tool required for battery replacement:
Phillips screwdriver (not included).
1
www.fisher-price.com
Page 2
Consumer Information
WARNING
Prevent
Entanglement Injury
This product will not attach to
all crib designs. Do not add
additional strings or straps to
attach to crib or playpen.
• To clean, wipe the surface of this toy
with a damp cloth. Do not immerse
this toy.
• Do not drop this toy on a hard surface.
• This toy has no consumer serviceable
parts. Please do not take this toy apart.
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user's authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules.
Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference and (2) this
device must accept any interference
received, including interference that
may cause undesired operation.
2
Page 3
Battery
Replacement
For best performance, we recommend
replacing the batteries that came with
this toy with three, new "AA" (LR6)
alkaline batteries.
• Locate the battery compartment on
the back of the toy.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert three, new “AA” (LR6)
alkaline batteries.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screws with a Phillips
screwdriver. Do not over-tighten.
• If the toy begins to operate erratically,
you may need to reset the electronics.
Slide the power/volume switch on the
top of the toy off and then back on.
• If sounds or lights become
faint or stop, it's time for an adult to
change the batteries.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority
for recycling advice and
facilities (Europe only).
Battery Safety
Information
1.5V x 3
“AA” (LR6)
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
3
Page 4
Crib Attachment
IMPORTANT! Always attach all provided fasteners (strings, straps, clamps, etc.)
tightly to a crib or playpen according to the instructions. Check frequently. If you
are attaching this toy to a crib side rail that can be lowered and raised, make sure
the crib side rail is in the raised (locked) position whenever a child is in the crib.
• Tie the toy’s upper ribbons to the
Crib Rail
Back View
Crib Spindle
top crib rail.
• Tie the toy’s lower strings around
a crib spindle.
Note: It is better to tie the ribbons
in a knot than a bow, since a bow
may be easily untied.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. N1069a-0920
©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
Page 5
Bottom
of Toy
Crib Attachment
• If the distance between the
toy and the mattress is less
than 7 inches, lower the
crib mattress.
Mattress
At least
7 inches
5
Page 6
Fun Music and Dancing Lights
Power/Volume Switch
• Locate the power/volume switch
on the top of the toy. Slide the
switch to the desired position:
on with low volume ; on with
high volume
Mode Switch
Locate the mode switch on the
top of the toy. Slide the switch to
Short Play or Long Play.
Short Play
Listen to fun music and dancing
lights when baby taps the toys
or spins the roller.
Long Play
Baby's motion activates the
music and lights for up to
10 minutes.
or off .
Mode Switch
Power/Volume
Switch
6
Loading...