Page 1
N0460
www.fisher-price.com
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
Tool needed for assembly: Phillips Screwdriver (not included).
www.fisher-price.com
N0460
N0460
Please keep this instruction sheet for future reference, as it contains important information.
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
Adult assembly is required.
Tool needed for assembly: Phillips Screwdriver (not included).
Tool needed for assembly: Phillips Screwdriver (not included).
Page 2
Parts
CAUTION
This product contains small parts
in its unassembled state.
Adult assembly is required.
IMPORTANT! Only use balls supplied with this toy.
Tee (2 Pieces)
Consumer Information
Bat
Base
#6 x 1/2" Screws - 2
SHOWN ACTUAL SIZE
Note: Tighten and loosen all
screws with a Phillips Screwdriver.
Do not over-tighten the screws.
Tee Topper
Plastic Screw Ball
2 Plastic Balls
Care
• Do not leave this product outdoors. Store this product indoors when
not in use.
• This product may be wiped clean using a mild cleaning solution and
a damp cloth. Do not use bleach. Do not use harsh or abrasive
cleaners. Rinse clean with water to remove residue.
• Periodically inspect this product for wear and damage and replace
any cracked parts.
Page 3
Slots
Assembly
Tee Pieces
Tab s
1
• Fit the tee pieces together by inserting the tabs on one piece into the
slots on the other piece.
• Press near each tab to “snap” together.
Tee
Base
3
• Fit the tee into the hole in the base and push to “snap” into place.
Hint: The tee is designed to fit into the base one way. If it does not
seem to fit, turn it until it fits into place!
Tee Topper
2
• Insert two screws into the holes at the top of the tee and tighten.
4
• Fit the tee topper onto the tee. Line up the slot on the tee topper with
the groove on the tee, and slide into place.
Page 4
Batting Practice Tips
• We recommend that this toy be used outdoors on a non-paved surface, such as grass or sand.
• Be sure that when your child is batting, there are no other children in or around the batting area, including directly in front of the tee.
• This toy is designed for use with plastic balls and a plastic bat (both included). It is not designed for use with wooden or metal bats, or
regulation baseballs or softballs. Use of these balls and bats may damage this toy.
• Hold the bat with hands together, about one or two inches from the knob at the end of the bat.
-Right handed batters should have the right hand on top of the left hand.
-Left handed batters should have the left hand on top of the right hand.
• Stand with feet about shoulder width apart.
• When hitting from the tee, stand close enough to hit the ball comfortably. Look at the ball and swing with a smooth and level motion.
Play Ball!
Beginner
Take a practice swing!
• Fit the plastic screw ball into the top of
the tee and twist to secure in place.
• Use the tee topper as a guide to practice
swinging the bat.
Batting Practice Tips
Batting Practice Tips
• We recommend that this toy be used outdoors on a non-paved surface, such as grass or sand.
• We recommend that this toy be used outdoors on a non-paved surface, such as grass or sand.
• Be sure that when your child is batting, there are no other children in or around the batting area, including directly in front of the tee.
• Be sure that when your child is batting, there are no other children in or around the batting area, including directly in front of the tee.
• This toy is designed for use with plastic balls and a plastic bat (both included). It is not designed for use with wooden or metal bats, or
• This toy is designed for use with plastic balls and a plastic bat (both included). It is not designed for use with wooden or metal bats, or
regulation baseballs or softballs. Use of these balls and bats may damage this toy.
regulation baseballs or softballs. Use of these balls and bats may damage this toy.
• Hold the bat with hands together, about one or two inches from the knob at the end of the bat.
• Hold the bat with hands together, about one or two inches from the knob at the end of the bat.
-Right handed batters should have the right hand on top of the left hand.
-Right handed batters should have the right hand on top of the left hand.
-Left handed batters should have the left hand on top of the right hand.
-Left handed batters should have the left hand on top of the right hand.
• Stand with feet about shoulder width apart.
• Stand with feet about shoulder width apart.
• When hitting from the tee, stand close enough to hit the ball comfortably. Look at the ball and swing with a smooth and level motion.
• When hitting from the tee, stand close enough to hit the ball comfortably. Look at the ball and swing with a smooth and level motion.
Intermediate
Hit the ball off the tee!
• Remove the plastic screw ball from
the tee.
• Place a plastic ball on the tee.
• Swing the bat. Use the tee topper as
a guide to help hit the ball.
Advanced
Hit the ball all by yourself!
• Remove the tee topper from the tee.
• Place a plastic ball on the tee.
• Swing the bat to hit the ball off the tee.
Storage
• Put the plastic screw ball in the hole in the base. Put one plastic ball on the tee, and the other in the groove on the base of the tee.
• Stand the bat up in the large hole in the back of the base.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA N0460pr-0920
Loading...