Fisher-Price M6162, M9896 Instruction Sheet

www.fisher-price.com

Consumer Information

WARNING

Possible Entanglement Injury

• Keep out of baby’s reach.

• Remove mobile from crib/cot or playpen when
baby begins to push up on hands or knees.

• This product will not attach to all crib/cot
designs. Do not add additional strings or
straps to attach to crib/cot or playpen.

CAUTION

This toy contains small parts in its unassembled

state. Adult assembly is required.

• Please keep this instruction sheet for future reference,
as it contains important information.

• Adult assembly is required.

• Requires four “D” (LR20) alkaline batteries for the mobile
and two “AA” (LR6) alkaline batteries for the remote.
(Batteries not included.)

•

Tool required for assembly: Phillips screwdriver (not included).

• Age: Birth to 5 months.

• A crib/cot mobile is intended for visual stimulation and is
not to be grasped by a child.

• When used on a dresser top, do not place within the
reach of a standing baby.

• Always attach by all provided fasteners (clamp) tightly to
a crib/cot or playpen according to the instructions.
Check frequently.

Remote

Arm

Parts

Base

3 Spokes

3 Soft Toys

3 Hangers

Crib/Cot Adapter

Clamp

Hub

#6 x 1.6 cm Screw – 1

#4 x 1 cm Washer Head Screw – 3

Both Shown Actual Size

Note: Tighten and loosen the screws

with a Phillips screwdriver. Do not

over-tighten the screws.

PRINTED IN CHINA M6162pr-0920

2

Fabric Skirt

Battery Installation

1.5V x 2

“AA” (LR6)

1.5V x 4

“D” (LR20)

We recommend using alkaline

batteries for longer battery life.

Remote

• Loosen the screw in the battery compartment door
with a Phillips screwdriver. Remove the battery
compartment door.

• Insert two “AA” (LR6) alkaline batteries, as indicated
inside the battery compartment.

• Replace the battery compartment door and tighten the
screw with a Phillips screwdriver. Do not over-tighten.

IMPORTANT! If the mobile does not respond to the remote,
it does not mean that the battery power in the remote is
low. Replace the batteries in the remote if the LED signal
indicator on the remote is dim when the button is pressed.
If the LED signal indicator does not light after installing
new batteries in the remote, check the orientation of the
batteries in the battery compartment to make sure they
are properly installed.

Protect the environment by not disposing of this
product with household waste (2002/96/EC). Check
your local authority for recycling advice and facilities.

Mobile Base

• Loosen the screws in the battery compartment door
with a Phillips screwdriver. Remove the battery
compartment door. You may need to use the tip of the
screwdriver to lift the battery compartment door.

Hint: If the crib/cot adapter is attached to the base, loosen
the screws in the crib/cot adapter and remove it first.

• Insert four “D” (LR20) alkaline batteries.

• Replace the battery compartment door and tighten the
screws with a Phillips screwdriver. Do not over-tighten.

IMPORTANT! Under normal use conditions, the batteries
in the mobile will require replacement more often than the
batteries in the remote. When sounds or light become faint
or movement of the mobile is sluggish, it’s time for an adult
to replace the batteries in the mobile base.

3