Fisher-Price M8126b-0920 User Manual

IMPORTANT SAFETY INSTRUCTIONS
-
SAVE THESE INSTRUCTIONS.
CAUTION - ELECTRIC TOY
Not recommended for children under 3 years of age. As with all electric products, precautions should be observed during handling and use to prevent electric shock.
CONSUMER INFORMATION
DANGER
To prevent electric shock, do not immerse in
water; wipe clean with a damp cloth.
To reduce the risk of fire or electric shock,
carefully follow these instructions.
• Adult assembly is required.
• Requires one 9.6V NiMH rechargeable battery pack (included) and three “AA” (LR6) alkaline batteries (not included) for operation.
• Tool required for battery installation: Phillips screwdriver (not included).
Before fi rst-time use, charge the 9.6V NiMH rechargeable battery pack for 4 hours. Charge the 9.6V NiMH rechargeable battery only with the supplied charger. Do not use any other charger.
• The charger is not a toy. Do not use extension cords with the charger.
Adults Note: Adult supervision is required while charging the 9.6V NiMH battery. Regularly examine the charger for damage to the cord, plug, housing or other parts that may result in the risk of fi re, electric shock or injury. In the event of any damage, do not use the charger until the damage has been properly repaired.
• Even with proper care, the rechargeable battery will not last forever. The life of the rechargeable battery depends on how well you follow these instructions and the total number of hours it is used. If you should need to replace the rechargeable battery, contact Fisher-Price
• Do not disassemble the sealed 9.6V NiMH rechargeable battery pack.
• Do not recharge a battery pack that shows leakage or corrosion.
• Charger specifi cations: Input 120 VAC, 60 Hz, 0.3 A; Output 11.2 VDC, 360 mA, 4 VA.
• This product is intended for indoor use only.
• Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not use bleach. Do not use harsh or abrasive cleaners. Do not immerse.
• This product has no consumer serviceable parts. Do not take this toy apart.
®
.
ASSEMBLY
• Match the shape on each leg to the shape on the dinosaur body .
• Fit the pegs on each leg into the sockets on the dinosaur body. Push each leg to “click” into place. Make sure you hear a “click”.
IMPORTANT! For proper function, make sure all three pegs on each front leg are snapped into the sockets on the dinosaur body.
• Fit the tail onto the back of the dinosaur. Push the tail to “click” into place. Make sure you hear a “click”.
Loading...
+ 5 hidden pages